10-50L [ETC]
CHEMTRONICS Technical Data Sheet Chem-Wik Rosin;型号: | 10-50L |
厂家: | ETC |
描述: | CHEMTRONICS Technical Data Sheet Chem-Wik Rosin |
文件: | 总2页 (文件大小:48K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CHEMTRONICS
Technical Data Sheet
TDS # CWik
Chem-Wik Rosin
PRODUCT DESCRIPTION
TYPICAL PRODUCT DATA AND
PHYSICAL PROPERTIES
Chem-Wik Rosin is especially designed for
today’s heat sensitive electronic components.
The lighter mass, pure copper braid
construction allows for better thermal
conductivity, even at low temperatures.
Chem-Wik Rosin responds as much as 50%
faster than conventional desoldering braids.
This design minimizes overheating and
requires less “contact” pressure for greater
operator control. All sizes are coated with a
Type “R” organic flux system.
Chem-Wik Rosin
Flux Type:
Grade WW, Type “R”
No
Clean-up Required:
Military Specifications: MIL-F-14256F
Shelf Life – 2 years from manufacturer
date
. Requires little or no post solder cleaning
. No corrosive residues
. Optimized weave design for faster
wicking and heat transfer
Size
Inches
.030”
Size
Metric
.76mm
Part #
2-5L
. Halide free
. Minimal risk of heat damage to
5-5L
7-5L
.050”
.075”
.100”
1.27mm
1.91mm
2.54mm
components and circuit boards
10-5L
TYPICAL APPLICATIONS
Chem-Wik Rosin desoldering braid safely
removes solder from:
STATIC DISSIPATIVE PACKAGING
Static Dissipative packaging is available on
all 5 foot bobbins. The static dissipative
bobbins qualify as electrostatic discharge
protective per DOD Standard 1686 and DOD
Handbook 263. Meets the static delay rate
provision of MIL-B-81705C.
. Thru-hole Components
. Surface Mount Device Pads
. BGA Pads
. Micro Circuits
. Terminals
. Lugs and Posts
. Identification Script
USAGE INSTRUCTIONS
For industrial use only.
5) As solder becomes molten, the color of the
wick will change from copper to silver.
6) Remove wick and iron from solder joint
simultaneously once color change has stopped.
7) The component lead is now clean and free
from solder.
Read MSDS carefully prior to use.
1) Choose a Chem-Wik desoldering braid
width equal to or slightly larger than the
pad or connection.
2) Choose a solder iron tip equal to or slightly
smaller than the pad or connection.
3) Set temperature of iron between 600-750°F
4) Place wick on solder joint and place tip of hot
iron on top of wick
8) Clip and discard the used portion of the wick.
AVAILABILITY
Color
5 ft.
Bobbin
25 ft.
Spool
50 ft.
Spool
100 ft.
Spool
500 ft.
Spool
Width
.030”
.050”
.075”
.100”
Code
White
Yellow
Green
Blue
2-5L
5-5L
7-5L
10-5L
2-25L
5-25L
7-25L
10-25L
2-50L
5-50L
7-50L
10-50L
2-100L
5-100L
7-100L
10-100L
2-500L
5-500L
7-500L
10-500L
Chem-WikRosin is designed to meet
NOTE:
This information is believed to be accurate. It is
intended for professional end users having the skills
to evaluate and use the data properly.
CHEMTRONICS does not guarantee the accuracy of
the data and assumes no liability in connection with
damages incurred while using it.
or exceed the following standards:
MIL-F-14256F, Type R
MIL-STD-2000A
MIL-B-81705C
NASA NHB5300.4(3A)
NASA SP-5002
NASA NPC200-4
IPC SF-818
DOD Handbook 263
DOD Standard 1686
BELLCORE TR-NWT-00078
CHEMTRONICS
8125 COBB CENTER DRIVE
KENNESAW, GA 30152
1-770-424-4888
REV. D (08/13)
DISTRIBUTED BY:
TECHNICAL & APPLICATION
ASSISTANCE
Chemtronics provides a technical hotline to
answer your technical and application related
questions. The toll free number is:
1-800-TECH-401.
相关型号:
©2020 ICPDF网 联系我们和版权申明