10-50TVC [ANAREN]
RF/Microwave Termination, 0MHz Min, 4000MHz Max, 50ohm;
| 型号： | 10-50TVC |
| 厂家： | 
ANAREN MICROWAVE |
| 描述： | RF/Microwave Termination, 0MHz Min, 4000MHz Max, 50ohm 射频 微波 |
| 文件： | 总2页 (文件大小：321K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Model 10-50TVC
Flanged Termination
10 Watts, 50Ω
General Specifications
Resistive Element
Substrate
Thick film
Beryllium oxide ceramic
Cover
Alumina Ceramic
Mounting Flange
Lead(s):
Copper, Nickel plated per QQ-N-290
99.9% pure silver (.006 thick)
Electrical Specifications
Features:
Resistance Range:
Frequency Range:
Power:
50 ohms, 5%
DC – 4.0 GHz
10 Watts
• DC – 4.0 GHz
• 10 Watts
VSWR
1.3:1 DC – 4.0 GHz
• BeO Ceramic
Note: Tolerance is 0.010”, unless otherwise specified. Designed to meet of
exceed applicable portions of MIL-E-5400. Operating temperature is -55ºC to
150ºC (see chart for derating temperatures).
All dimensions in inches.
Specifications subject to change with out notice.
• Non-Nichrome Resistive
Element
• Low VSWR
• 100% Tested
Outline Drawing
10-50TVC (097) Rev A
USA/Canada:
Toll Free:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape
and Reel For Pick and
Place Manufacturing.
Europe:
Model 10-50TVC
Typical Performance:
Power De-rating:
Mounting Footprint and Procedure:
.025 MIN.
(2 PLACES)
BOARD LOWER
THAN LEAD.
BOARD EVEN
WITHLEAD.
BOARD LOWER
THAN LEAD.
BOARDHIGHER
THAN LEAD.
SUGGESTED STRESSRELIEF METHODS
SCALE: NONE
NOTRECOMMENDEDAPPLICATION
SCALE: NONE
SUGGESTED MOUNTING PROCEDURES:
MAKE SURE THAT THE DEVICES ARE MOUNTED ON
FLAT SURFACES (.001" UNDER THE DEVICE) TO
OPTIMIZE THE HEAT TRANSFER.
1.
2. DRILL & TAP THE HEATSINK FOR THE APPROPRIATE
THREAD SIZE TO BE USED.
3. COAT HEATSINK WITH A MINIMUM AMOUNT OF HIGH
QUALITY SILICONE GREASE (.001" MAX. THICKNESS).
4. POSITION DEVICE ON MOUNTING SURFACE & SECURE
USING SOCKET HEAD SCREWS, FLAT & SPLIT WASHER.
TORQUE SCREWS TO THE APPROPRIATE VALUE. MAKE
SURE THAT THE DEVICE IS FLAT AGAINST THE HEATSINK.
(CARE SHOULD BE TAKEN TO AVOID UPWARD PRESSURE OF
THE LEADS TOWARDS THE LID).
5.
SOLDER LEADS IN PLACE USING APPROPROATE SOLDER WITH
A CONTROLLED TEMPERATURE IRON.
** FOR MORE DETAILS CONTACT FACTORY **
10-50TVC (097) Rev A
USA/Canada:
Toll Free:
Europe:
(315) 432-8909
(800) 544-2414
+44 2392-232392
Available on Tape and
Reel For Pick and Place
Manufacturing.
相关型号：
©2020 ICPDF网 联系我们和版权申明