S1D14F57 [EPSON]
2-level grayscale EPD Passive panel driver IC; 2级灰度EPD无源面板驱动IC型号: | S1D14F57 |
厂家: | EPSON COMPANY |
描述: | 2-level grayscale EPD Passive panel driver IC |
文件: | 总3页 (文件大小:148K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
S1D14F57
2-level grayscale EPD Passive panel driver IC
● Two-level grayscale EPD passive panel driver IC
● Built-in Flash memory that stores output drive waveform data for the EPD
passive panel drivers
● Built-in temperature detection circuit
● Command interfaces
● Expansion function for EPD drive pins of Seiko EPSON S1C17F00 series
■ DESCRIPTIONS
The S1D14F57 is a two-level grayscale EPD passive panel driver IC. The device integrates drivers that are
necessary for display updates of the EPD passive panel (segment (256 pins), top plane (4 pin) and back plane
(4 pin)) and a control circuit for driver waveforms to one chip. The device also includes a Flash memory that
stores output drive waveform data for the EPD passive panel drivers and a power supply circuit. The S1D14F57
can compose a two-level grayscale EPD passive panel display controller of a minimum number of parts.
FEATURES
z Segment outputs
z Top plane output
: 256 pins
: 4 pin
z Back plane output
z EPD display waveform setting
: 4 pin
: 7 types (max.) can be stored in the built-in Flash memory.
EPD display waveforms can be automatically selected
with the automatic temperature detection function.
One type can be set with the command interfaces.
(32 phases max.)
z Built-in Flash memory
: Capacity: 16k bits (storage for output drive waveform setting
/ initial setting)
Erase-programming cycles: 10 times.
Power supply for erase / programming (VPP): necessary
You can reprogram the built-in Flash memory through the EPD
microcontroller from Seiko Epson using the debug tool
“ICDmini”. note1
z Built-in temperature detection circuit
: Temperature range -10 °C to 60 °C (±5°C)
Temperature detection precision ±5°C
: 2 MHz (typ.) built-in oscillation circuit
: Built-in
z Clock generator
z Power-on reset circuit
z Command interfaces
: I2C slave interface note2
SPI interface
: ≤ 1μA(25°C)
z Deep standby function
z Currently displayed data retention function
: Built-in 257-bit register for VDD power supply
(ESEG0 to ESEG255, for storing currently displayed data for EBP)
z Boost power supply circuit
z EPD drive power supply
: VOUT1 Booster
: VEPD Booster = 9.15V/12.30V/15.45V
z Power supply for internal power supply circuit / power supply for logic signal I/O circuits
: VDD = 1.75V to 5.50V
z Expansion function for EPD drive pins of Seiko Epson EPD microcontrollers
z Multi-chip EPD drive function
z Shipment forms
:Aluminum pad chip,
Gold bump chip (T.B.D.)
Note1:For details about how to erase/reprogram the built-in Flash memory, contact our representatives.
Note2: The 10-bit address mode/general call address/HS mode are not supported.
S1D14F57
BLOCK DIAGRAM
XSTA
Reset Circuit
VDD
VSS
MON_YR
TESTEN
TESTMOD1
TESTMOD0
TESTFOFF
Test, I/O
O
IFSE
SCL
SDA
SPI / I2C Slave
SDO
MON_TM
Oscillator
Clock Generator
I2C_AD0 / XSCS
MON_TM
2
I2C_AD
1
Temperature
Controller
Temperature
VD1SEL
VD1
C11P
C11N
Command/State
Register
C12P
C12N
C21P
C21N
C22P
C22N
Power Generator
Controller
MON_VDC1
MON_VDC2
Power Generator
VOUT1
VEPD
TESTOUT1
TESTOUT2
TESTOUT3
XMFS
MFC
Flash Memory
Controller
Serial
VPP
Flash Memory
(2K
Interface
MFD
MFD
ESEG0~255
ETP0~
SLVSEL
EPDCLK
EPDTRG
EPD Controller
EBP0~3
I/O
2
Seiko Epson Corporation
S1D14F57
NOTICE:
No part of this material may be reproduced or duplicated in any form or by any means without the written permission of Seiko Epson.
Seiko Epson reserves the right to make changes to this material without notice. Seiko Epson does not assume any liability of any kind
arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no
representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license
to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in
accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may
contain technology or the subject relating to strategic products under the control of the Foreign Exchange and Foreign Trade Law of Japan
and may require an export license from the Ministry of Economy, Trade and Industry or other approval from another government agency.
All brands or product names mentioned herein are trademarks and/or registered trademarks of their respective companies.
©Seiko Epson Corporation 2012, All rights reserved
EPSON semiconductor website
MICRODEVICES OPERATIONS DIVISION
http://www.epson.jp/device/semicon_e/
IC Sales & Marketing Department
421-8 Hino, Hino-shi, Tokyo 191-8501, JAPAN
Phone: +81-42-587-5814 FAX: +81-42-587-5117
Document code: 412383400
First issue June, 2012 in Japan
3
相关型号:
S1D15200D00A
Liquid Crystal Driver, 77-Segment, CMOS, 4.80 X 7.04 MM, 0.40 MM HEIGHT, ALUMINUM PAD, DIE-100
SEIKO
S1D15200D00B
Liquid Crystal Driver, 77-Segment, CMOS, 4.80 X 7.04 MM, 0.525 MM HEIGHT, GOLD BUMP, DIE-100
SEIKO
S1D15200D00E
Liquid Crystal Driver, 77-Segment, CMOS, 4.80 X 7.04 MM, 0.525 MM HEIGHT, GOLD BUMP, DIE-100
SEIKO
S1D15200D10A
LIQUID CRYSTAL DISPLAY DRIVER, UUC100, 4.80 X 7.04 MM, 0.40 MM HEIGHT, ALUMINUM PAD, DIE-100
SEIKO
S1D15200D10E
LIQUID CRYSTAL DISPLAY DRIVER, UUC100, 4.80 X 7.04 MM, 0.525 MM HEIGHT, GOLD BUMP, DIE-100
SEIKO
S1D15201D10B
Liquid Crystal Driver, 80-Segment, CMOS, 4.80 X 7.04 MM, 0.525 MM HEIGHT, GOLD BUMP, DIE-100
SEIKO
S1D15201D10E
LIQUID CRYSTAL DISPLAY DRIVER, UUC100, 4.80 X 7.04 MM, 0.525 MM HEIGHT, GOLD BUMP, DIE-100
SEIKO
©2020 ICPDF网 联系我们和版权申明