B84143V0095R290 [EPCOS]

3−line sine−wave EMC output filters for converters and power electronics; 三线正弦波EMC输出滤波器变频器和电力电子


型号：	B84143V0095R290
厂家：	EPCOS
描述：	3−line sine−wave EMC output filters for converters and power electronics 三线正弦波EMC输出滤波器变频器和电力电子电子 LTE
文件：	总11页 (文件大小：2154K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

3−line sine−wave EMC output filters

for converters and power electronics

690 VAC, 95A, 180 A, 320A, 40 °C

Ordering code:

Date:

B84143V*R290

2008−02−04

Version:

 EPCOS AG 2008. Reproduction, publication and dissemination of this data sheet, enclosures hereto and the

information contained therein without EPCOS’ prior express consent is prohibited.

3−line sine−wave EMC output filters

B84143V*R290

for converters and power electronics

Construction

S 3−line sinus emc output filter

S Metal case

Features

S Supersede shielded motor cables

S Motor noise reduction

S Reduction of bearing current

S dv/dt reduction

S Easy to install

S Compact design

S Degree of protection IP 20 ¹⁾

S Design complies with

EN 60939, UL 1283, CSA 22.2 No.8

S Optimized for long motor cable (up to 1000 m)

and operation under full load

S No integrated forced ventilation (maintenance−free)

S Connection to converter DC−link is not necessary

S Reducing eddy current losses

Applications

S Frequency converters for motor drives, e.g.

− elevators

− pumps

− traction systems

− conveyer systems

− HVAC systems (heating, ventilation and air conditioning)

S Power supplies

Terminals

S Line side ( to converter): shielded cable up to 180 A

S Load side (to motor): save to touch terminals up to 180 A

Marking

S Marking on component:

manufacturer’s logo, ordering code, rated voltage, rated current, rated motor frequency,

rated switch frequency, rated temperature, climatic category, date code

S Minimum marking on packaging: manufacturer’s logo, ordering code,

date code, quantity

) To IEC 60529:2001

Please read Important notes and Cautions and

warnings at the end of this document.

Page 2 of 11

B84143−V*−R147−01−7659

3−line sine−wave EMC output filters

B84143V*R290

for converters and power electronics

& SineFormer

Typical circuit diagram

converter

motor

Technical data and measuring conditions

Rated voltage U_R

Rated current I_R

Test voltage U_P

760 VAC

Referred to 40°C ambient temperature

2200 V DC, 2 s (line/line)

2800 V DC, 2 s (line/case)

Frequency Motor

0 − 100 Hz

4−8 kHz; (320 A: 2,5−3 kHz)

Pulse (Switch)

Overload capability

Max. dv/dt on Filter input

Convection distance to other

devices

1.5 @ I_Rfor 60 s per hour

5 kV/µs

See page 5

Climatic category

In accordance with EN 60068−1

25/100/21 (−25 °C/ +100 °C/ 21 days damp heat test)

Vibration (Sine)

According to DIN IEC60068−2−6

10 cycle, 1 Oct./min., 3−13 Hz: 3 mm,13−200 Hz: 1 g

15 g, 11 ms, 3 axis, 3 shocks per direction 18 total

Shock (half sine)

Current (I_R) derating depending on From 1000−4000 m 5 % / 1000 m

altitude

Current (I_R) derating depending on From 40−60 °C 10 % / 5 °C

ambient temperature

Temperature ^*

Noise ^*

Inside iron−choke ꢀ 130 _C; housing ꢀ 70 _C

ꢀ 72 dB(A)

^*)see cautions and warnings

Please read Important notes and Cautions and

warnings at the end of this document.

Page 3 of 11

B84143−V*−R147−01−7659

3−line sine−wave emc output filters

for converters and power electronics

B84143V*R290

& SineFormer

Characteristics and ordering codes

I_R

Terminal Voltage Losses

R_typ

Approx. Ordering code

weight

Approvals

drop

at 100 Hz

mm²

mΩ

250

B84143V0095R290

(120 A^*)

180

150

400

750

125

235

B84143V0180R290

B84143V0320R290

320

see

page 9

(400 A^*)

X = New ordering code will notified to UL file

^*) = Calculated for duty cycle (Ed.) 60%. Acceleration max. 6 s, brake max. 6 s @ 1x minute

Please read Important notes and Cautions and

warnings at the end of this document.

Page 4 of 11

B84143−V*−R147−01−7659

3−line sine−wave EMC output filters

for converters and power electronics

& SineFormer %

B84143V*R290

Convection space (cabinet fan recommended)

>200mm

>100mm

>200mm

Please read Important notes and Cautions and

warnings at the end of this document.

Page 5 of 11

B84143−V*−R147−01−7659

3−line sine−wave EMC output filters

for converters and power electronics

& SineFormer %

B84143V*R290

Dimensional drawings B84143V0095R290

Please read Important notes and Cautions and

warnings at the end of this document.

Page 6 of 11

B84143−V*−R147−01−7659

3−line sine−wave EMC output filters

B84143V*R290

for converters and power electronics

& SineFormer

Dimension data for previous page B84143V0095R290

Please read Important notes and Cautions and

warnings at the end of this document.

Page 7 of 11

B84143−V*−R147−01−7659

3−line sine−wave EMC output filters

for converters and power electronics

& SineFormer %

B84143V*R290

Dimensional drawing B84143V0180R290

Please read Important notes and Cautions and

warnings at the end of this document.

Page 8 of 11

B84143−V*−R147−01−7659

3−line sine−wave EMC output filters

for converters and power electronics

& SineFormer %

B84143V*R290

Dimensional drawing B84143V0320R290

Please read Important notes and Cautions and

warnings at the end of this document.

Page 9 of 11

B84143−V*−R147−01−7659

3−line sine−wave emc output filters

for converters and power electronics

& SineFormer %

B84143V*R290

Cautions and warnings

S Please note the advices in our data book “EMC Filters” (latest edition); attention should

be paid to the chapter “General safety notes”.

S It shall be ensured that only qualified persons (electricity specialists) are engaged on work

such as planning, assembly, installation, operation, repair and maintenance. They must

be provided with the corresponding documentation.

S Danger of electric shock. SineFormer contain components that store an electric charge.

Dangerous voltages can continue to exist at the filter terminals for longer than five min-

utes even after the power has been switched off.

S The protective earth connections shall be the first to be made when the SineFormer is

installed and the last to be disconnected. Depending on the magnitude of the leakage cur-

rents, the particular specifications for making the protective−earth connection must be ob-

served.

S Impermissible overloading of the SineFormer, such as with circuits able to cause reso-

nances, impermissible voltages at higher frequencies etc. can lead to bodily injury and

death as well as cause substantial material damages (e.g. destruction of the filter hous-

ing).

S SineFormer must be protected in the application against impermissible exceeding of the

rated currents by overcurrent protective.

S In case of leakage currents > 3.5 mA you shall mount the PE conductor stationary with

the required cross section before beginning of operation and save it against disconnect-

ing. For leakage currents I_L⁴⁾< 10 mA the PE conductor must have a KU value ³⁾of 4.5;

for leakage currents I_Lq 10 mA the PE conductor must have a KU value of 6.

S The information, specifications and values contained in this data sheet are based on our

knowlege of typical requirements that are often placed on SineFormer. It is incumbent on

the customer to check and decide whether this SineFormer is suitable for use in a particu-

lar application. In particular the values with regard to “temperature” and “noise” have to be

observed.

3) The KU value (symbol KU) is a classification parameter of safety−referred failure types designed to ensure protection against hazardous

body currents and excessive heating.

A value of KU = 4.5 with respect to interruptions is attained:

− with a permanently connected protective earth circuit w 1.5 mm

− with a protective earth circuit w 2.5 mm connected via shroud connectors (IEC 60309−2).

KU = 6 with respect to interruptions is achieved for fixed−connection lines w 10 mm where the type of connection and line layout corre-

spond to the requirements for PEN conductors as specified in relevant standards.

4) I = leakage current

Please read Important notes and Cautions and

warnings at the end of this document.

Page 10 of 11

B84143−V*−R147−01−7659

3−line sine−wave emc output filters

for converters and power electronics

& SineFormer %

B84143V*R290

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for cer-

tain areas of application. These statements are based on our knowledge of typical requirements

that are often placed on our products in the areas of application concerned. We nevertheless ex-

pressly point out that such statement cannot be regarded as binding statements about the suit-

ability of our products for a particular customer application. As a rule, EPCOS is either unfamil-

iar with individual customer applications or less familiar with them than the customers themselves.

For these reasons, it is always ultimately incumbent on the customer to check and decide whether

an EPCOS product with the properties described in the product specification is suitable for use in

a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic components or

failure before end of their usual service life time cannot be completely ruled out in the current

state of the art, even if they are operated as specified. In customer applications requiring a very

high level of operational safety and especially in customer applications in which the malfunction or

failure of a passive electronic component could endanger human life or health (e.g. in accident pre-

vention or life−saving systems), it must therefore be ensured by means of suitable design of the cus-

tomer application or other action taken by the customer (e.g. installation of protective circuitry or re-

dundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure

of a passive electronic component.

3. The warnings, cautions and product−specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this publica-

tion may contain substances subject to restrictions in certain jurisdictions (e.g. because they

are classed as hazardous). Useful information on this will be found in our Material Data Sheets

on the Internet (www.epcos.com/material). Should you have any more detailed questions, please

contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this publi-

cation may change from time to time. The same is true of the corresponding product specifica-

tions. Please check therefore to what extent product descriptions and specifications contained in

this publication are still applicable before or when you place an order.

IWe also reserve the right to discontinue production and delivery of products. Consequently,

we cannot guarantee that all products named in this publication will always be available.

6. Unless otherwise agreed in individual contracts, all orders subject to the current version of the

“General Terms of Delivery for Products and Services in the Electrical Industry” published

by the the German Electrical and Electronics Industry Association (ZVEI).

7. The trade names EPCOS, BAOKE, Alu−X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCAP,

PCC, PhaseCap, PhaseMod, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer,

SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe

and in other countries. Further information will be found on the Internet at www.epcos.com/trade-

marks.

Please read Important notes and Cautions and

warnings at the end of this document.

Page 11 of 11

B84143−V*−R147−01−7659

B84143V0095R290 [EPCOS]

相关型号：

B84143V0132R227

B84143V0180R127

B84143V0180R227

B84143V0180R290

B84143V0250R227

B84143V0320R127

B84143V0320R227

B84143V0320R290

B84143VR027

B84144

B84144-A120-R

B84144-A150-R