B7676 [EPCOS]
SAW Duplexer WCDMA/LTE Band IX; SAW双工器的WCDMA / LTE频带IX
| 型号： | B7676 |
| 厂家： | 
EPCOS |
| 描述： | SAW Duplexer WCDMA/LTE Band IX |
| 文件： | 总14页 (文件大小：188K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Components
SAW Duplexer
WCDMA/LTE Band IX
Series/type:
B7676
Ordering code:
Date:
Version:
August 09, 2010
1.1
EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Revision History
Changes compared to previously issued iteration
Issue
1.0
1.1
Originator
S.Mochizuka
S.Mochizuka
Detailed specification changes
Initial release
Improved design version:
Date
March 18, 2010
August 09, 2010
- Reduced Txport VSWR to 2.0 max.
- Increased Tx attenuation values esp. at
WLAN to 35dB and harmonics to 17dB min.
- Slightly worse values for GPS
- Increased Tx band isolation to 53dB min.
- Increased Tx band common mode isolation
to 53dB min.
Please read cautions and warnings and
important notes at the end of this document.
2
August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Application
■ Low-loss SAW duplexer for mobile telephone
WCDMA/LTE Band IX systems
■ Low insertion attenuation
■ Low amplitude ripple
■ Usable passband 35 MHz
■ Single ended to balanced transformation
in Antenna - Rx path
■ Impedance transformation 50Ω to 100Ω
in Antenna - Rx path
Features
0.4
0.55
■ Package size 2.5 x 2.0 mm2,
package height 0.74 mm max.
■ RoHS compatible
■ Approx. weight 0.013g
■ Package for Surface Mount Technology
(SMT)
5
6
2
7
9
bottom view
3
1
0.9
2.5
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
side view
top view
Pin configuration
3
1
■ 3
TX Input
■ 1, 8
■ 6
RX Output (balanced)
Antenna
8
■ 2, 4, 5 To be grounded
■ 7, 9 To be grounded
4,5,9
2,7
6
Please read cautions and warnings and
important notes at the end of this document.
3
August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
T
ZANT
ZRX
ZTX
=
=
=
=
-20˚C to +85 ˚C
50 Ω || 4.1 nH
100 Ω (balanced) || 8.2 nH
50 Ω
TX terminating impedance:
Characterisitcs TX - ANT
min.
typ.
max.
@ 25 ˚C
1767.4
Center frequency
fC
—
—
MHz
Maximum insertion attenuation
1749.9 ... 1784.9 MHz
1.4
1.3
1.9
1.8
dB
dB
1)
1)
@fcarrier1752.4 ... 1782.4 MHz
αWCDMA
Amplitude ripple(p-p)
1749.9 ... 1784.9 MHz
0.4
0.3
0.9
0.8
dB
dB
@fcarrier1752.4 ... 1782.4 MHz
αWCDMA
Error Vector Magnitude
EVM2)
1.3
1.6
1.6
2.0
2.0
2.0
%
@fcarrier1752.4 ... 1782.4 MHz
Input VSWR (TX port)
1749.9 ... 1784.9 MHz
Output VSWR (ANT port)
1749.9 ... 1784.9 MHz
Attenuation
α
10.0
... 1565.42 MHz
30
35
36
37
39
25
45
45
40
27
35
20
17
15
38
38
39
39
42
32
50
51
42
40
41
31
21
19
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
1565.42 ... 1573.374 MHz
1573.374 ... 1577.466 MHz
1577.466 ... 1585.42 MHz
1597.5515 ... 1605.886 MHz
1605.886 ... 1680.0
MHz
MHz
1844.9
@fcarrier 1847.4
1884.5
... 1879.9
... 1877.4
... 1919.6
... 2170.0
... 2500.0
... 3570.0
... 5355.0
... 5850.0
1)
MHz αWCDMA
MHz
2110.0
2400.0
3500.0
5150.0
MHz
MHz
MHz
MHz
5725.0
MHz
1)
2)
Attenuation of WCDMA signal(“Powertransferfunction“).Please refer to annotation on page (7).
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
Please read cautions and warnings and
important notes at the end of this document.
4
August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
T
ZANT
ZRX
ZTX
=
=
=
=
–20 ˚C to +85 ˚C
50 Ω || 4.1 nH
100 Ω (balanced) || 8.2 nH
50 Ω
TX terminating impedance:
Characterisitcs ANT - RX
min.
typ.
max.
@ 25 ˚C
1862.4
Center frequency
fC
—
—
MHz
Maximum insertion attenuation
1844.9 ... 1879.9 MHz
2.0
1.9
2.4
2.4
dB
dB
1)
1)
@fcarrier1847.4 ... 1877.4 MHz
αWCDMA
Amplitude ripple(p-p)
1844.9 ... 1879.9 MHz
0.6
0.5
0.8
0.8
dB
dB
@fcarrier1847.4 ... 1877.4 MHz
αWCDMA
Common Mode Rejection Ratio CMRR
232)
28
1.5
1.5
dB
1844.9 ... 1879.9 MHz
Input VSWR (ANT port)
1844.9 ... 1879.9 MHz
2.0
2.0
Output VSWR (RX port)
1844.9 ... 1879.9 MHz
Attenuation
α
10.0 ... 1750.0 MHz
1749.9 ... 1784.9 MHz
@fcarrier1752.4 ... 1782.4 MHz αWCDMA
1965.0 ... 2400.0 MHz
35
48
48
15
30
35
54
54
55
52
52
42
dB
dB
dB
dB
dB
dB
1)
2400.0 ... 2484.0 MHz
2484.0 ... 5650.0 MHz
IMD Product Level Limits3)
at fTX = 1749.9~1784.9 MHz
Blocker 1
Blocker 2
Blocker 3
Blocker 4
95.0 MHz
1672.4 MHz
3629.8 MHz
5397.2 MHz
-130
-123
-124
-129
-105 dBm
-108 dBm
-105 dBm
-108 dBm
1)
2)
3)
Attenuation of WCDMA signal(“Powertransferfunction“).Please refer to annotation on page (7).
A combination of 10o phase balance and 1dB amplitude balance corresponds to 19.6 dB CMRR.
IMD product level limits for power levels PTX=21.5dB (antenna port output power) and PBLOCK-
ER=-15dBm (antenna port input power).
Please read cautions and warnings and
important notes at the end of this document.
5
August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Characteristics
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
T
ZANT
ZRX
ZTX
=
=
=
=
–20 ˚C to +85 ˚C
50 Ω || 4.1 nH
100 Ω (balanced) || 8.2 nH
50 Ω
TX terminating impedance:
Characterisitcs TX - RX
min.
typ.
max.
@ 25 ˚C
Differential Mode Isolation
α
1749.9 ... 1784.9 MHz
@fcarrier1752.4 ... 1782.4 MHz αWCDMA
1844.9 ... 1879.9 MHz
52
53
50
50
55
56
54
55
dB
dB
dB
dB
1)
1)
@fcarrier1847.4 ... 1877.4 MHz αWCDMA
Common Mode Isolation
1749.9 ... 1784.9 MHz
@fcarrier1752.4 ... 1782.4 MHz αWCDMA
α
53
53
56
56
dB
dB
1)
1)
Attenuation of WCDMA signal(“Powertransferfunction“).Please refer to annotation on page (7).
Please read cautions and warnings and
important notes at the end of this document.
6
August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Maximum ratings
Storage temperature range
DC voltage
Tstg
VDC
VESD
PIN
–40/+85 ˚C
5
V
V
machine model, 10 pulses
ESD voltage
501)
Input power at
source and load impedance 50 Ω
continuous wave
T = 50˚C, 5,000 h
1749.9 ... 1784.9 MHz
elsewhere
29
10
dBm
dBm
}
1)
acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.
Annotation for characteristics section
Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by
∞
Sds21(f)HRRC(f – fCarrier)
2df
∫
∞
fCarrier according to 3GPP TS 25.101 (e.g. for WCDMA Band 9-Passband, fCarrier ranges from
1752.4 MHz (lowest Tx channel) to 1782.4 MHz (highest Tx channel). HRRC(f) is the transfer
function of the root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with
the following normalization:
∞
HRRC(f) 2df= 1
∫
∞
Please read cautions and warnings and
important notes at the end of this document.
7
August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Frequency Response Tx-ANT (passband)
Frequency Response Tx-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
8
August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Frequency Response ANT-Rx (passband)
Frequency Response ANT-Rx (wideband)
Please read cautions and warnings and
important notes at the end of this document.
9
August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Frequency Response Tx-Rx (passband) / Differential Mode
Frequency Response Tx-Rx (wideband) / Differential Mode
Please read cautions and warnings and
important notes at the end of this document.
10 August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Frequency Response Tx-Rx (passband) / Common Mode
Frequency Response Tx-Rx (wideband) / Common Mode
Please read cautions and warnings and
important notes at the end of this document.
11 August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
Return Loss S11 Tx - port S22 ANT - port S33 Rx - port
Please read cautions and warnings and
important notes at the end of this document.
12 August 09, 2010
SAW Components
SAW Duplexer
B7676
1767.4 / 1862.4 MHz
Preliminary Data
References
Type
B7676
Ordering code
Marking and package
Packaging
C61157-A3-A61
F61074-V8153-Z000
L_1126
Date codes
B7676_NB.s4p, B7676_WB.s4p
S-parameters
see file header for port/pin assignment table
Soldering profile
RoHS compatible
S_6001
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
Matching coils
See Inductor pdf-catalog
http://www.tdk.co.jp/tefe02/coil.htm#aname1
and Data Library for circuit simulation
http://www.tdk.co.jp/etvcl/index.htm
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2010. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
13 August 09, 2010
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, FormFit, MiniBlue, MiniCell, MKD, MKK, MLSC, MotorCap, PCC,
PhaseCap, PhaseCube, PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD,
SiMic, SIMID, SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks
registered or pending in Europe and in other countries. Further information will be found on
the Internet at www.epcos.com/trademarks.
14 August 09, 2010
相关型号：
©2020 ICPDF网 联系我们和版权申明