B7699 [EPCOS]
SAW Duplexer for W-CDMA Band IV / CDMA 1x AWS Band; SAW双工器的W- CDMA频段IV / CDMA 1X AWS频段
| 型号： | B7699 |
| 厂家： | 
EPCOS |
| 描述： | SAW Duplexer for W-CDMA Band IV / CDMA 1x AWS Band |
| 文件： | 总14页 (文件大小：132K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SAW Components
SAW Duplexer
for W-CDMA Band IV / CDMA 1x AWS Band
Series/type:
B7699
Ordering code:
B39212B7699P810
Date:
Version:
February 04, 2010
2.0
EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Application
■ Low-loss SAW duplexer for mobile telephone
W-CDMA Band IV / CDMA 1x AWS systems
■ Low insertion attenuation
■ Low amplitude ripple
■ Usable passband 45 MHz
■ Fully matched with integrated matching network
Features
■ Package size 2.5 x 2.0 x 0.89 mm3
■ RoHS compatible
■ Approx. weight 0.035 g
■ Package for Surface Mount Technology
(SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
■ Moisture Sensitive Level 3
Pin configuration
1
3
■ 1
■ 3
■ 6
RX Output
TX Input
Antenna
■ 2, 4, 5 To be grounded
■ 7, 8, 9 To be grounded
7,8,9
2,4,5
6
Please read cautions and warnings and
important notes at the end of this document.
2
February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Characteristics for W-CDMA Band 4
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
T
ZANT
ZRX
ZTX
= –15 ˚C to +80 ˚C
=
50 Ω
50Ω
50 Ω
=
TX terminating impedance:
=
Characterisitcs TX - ANT
Center frequency
min.
typ.
@ 25 ˚C
1732.5
max.
fC
αWCDMA
MHz
1)
Maximum insertion attenuation
@fcarrier
1712.4 ... 1752.6 MHz
1.5
1.5
1.8 dB
1.72) dB
@fcarrier
1712.4 ... 1752.6 MHz
1)
Amplitude ripple (p-p)
∆αWCDMA
@fcarrier
1712.4 ... 1752.6 MHz
0.4
0.85
1.9
1.0 dB
Error Vector Magnitude
EVM3)
2.0
2.0
2.0
%
1712.4 ... 1752.6 MHz
Input VSWR (TX port)
1710.0 ... 1755.0 MHz
Output VSWR (ANT port)
1710.0 ... 1755.0 MHz
1.7
Attenuation
α
0.3 ... 1000.0 MHz
1310.0 ... 1355.0 MHz
1574.0 ... 1577.0 MHz
2112.4 ... 2152.6 MHz
2400.0 ... 2500.0 MHz
3420.0 ... 3510.0 MHz
5130.0 ... 5265.0 MHz
30
30
38
43
25
20
7
38
36
45
46
37
25
12
dB
dB
dB
dB
dB
dB
dB
1)
@fcarrier
αWCDMA
1)
2)
3)
Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (9).
Maximum insertion attenuation at room temperature T= +25 ˚C.
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
Please read cautions and warnings and
important notes at the end of this document.
3
February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Characteristics for W-CDMA Band 4
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
T
ZANT
ZRX
ZTX
= –15 ˚C to +80 ˚C
=
50 Ω
50 Ω
50 Ω
=
TX terminating impedance:
=
Characterisitcs ANT - RX
Center frequency
min.
typ.
@ 25 ˚C
2132.5
max.
fC
αWCDMA
MHz
1)
Maximum insertion attenuation
@fcarrier
2112.4 ... 2152.6 MHz
1.8
1.8
2.5 dB
2.42) dB
@fcarrier
2112.4 ... 2152.6 MHz
1)
Amplitude ripple (p-p)
∆αWCDMA
@fcarrier
2112.4 ... 2152.6 MHz
0.4
1.0
1.0 dB
Error Vector Magnitude
EVM3)
3.0
2.0
2.0
%
2112.4 ... 2152.6 MHz
Input VSWR (ANT port)
2110.0 ... 2155.0 MHz
Output VSWR (RX port)
2110.0 ... 2155.0 MHz
1.65
1.4
Attenuation
α
0.3 ... 1310.0 MHz
1310.0 ... 1355.0 MHz
1712.4 ... 1752.6 MHz
30
38
42
42
dB
dB
1)
@fcarrier
αWCDMA
46
51
dB
1910.0 ... 1955.0 MHz
2400.0 ... 2500.0 MHz
3820.0 ... 3910.0 MHz
4220.0 ... 4370.0 MHz
5530.0 ... 5665.0 MHz
27
25
19
20
20
33
35
39
32
27
dB
dB
dB
dB
dB
1)
2)
3)
Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (9).
Maximum insertion attenuation at room temperature T= +25 ˚C.
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
Please read cautions and warnings and
important notes at the end of this document.
4
February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Characteristics for W-CDMA Band 4
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
T
ZANT
ZRX
ZTX
= –15 ˚C to +80 ˚C
=
50 Ω
50 Ω
50 Ω
=
TX terminating impedance:
=
Characterisitcs TX - RX
min.
typ.
max.
@ 25 ˚C
1)
Isolation
αWCDMA
@fcarrier
@fcarrier
1712.4 ... 1752.6 MHz
2112.4 ... 2152.6 MHz
52
45
56
51
dB
dB
1)
Attenuation of WCDMA signal (“Powertransferfunction“). Please refer to annotation on page (9).
Please read cautions and warnings and
important notes at the end of this document.
5
February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Characteristics for CDMA 1x AWS Band
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
T
ZANT
ZRX
ZTX
= –30 ˚C to +85 ˚C
=
50 Ω
50Ω
50 Ω
=
TX terminating impedance:
=
Characterisitcs TX - ANT
Center frequency
min.
typ.
@ 25 ˚C
1732.5
max.
fC
MHz
Maximum insertion attenuation
α
1710.0 ... 1755.0 MHz
1.6
1.6
2.0 dB
1.91) dB
1710.0 ... 1755.0 MHz
Amplitude ripple (p-p)
∆α
1710.0 ... 1755.0 MHz
0.4
1.0 dB
Input VSWR (TX port)
1710.0 ... 1755.0 MHz
1.9
1.7
2.0
2.0
Output VSWR (ANT port)
1710.0 ... 1755.0 MHz
Attenuation
α
0.3 ... 1000.0 MHz
1310.0 ... 1355.0 MHz
1574.0 ... 1577.0 MHz
2110.0 ... 2155.0 MHz
2400.0 ... 2500.0 MHz
3420.0 ... 3510.0 MHz
5130.0 ... 5265.0 MHz
30
30
38
43
25
20
7
38
36
45
46
37
25
12
dB
dB
dB
dB
dB
dB
dB
1)
Maximum insertion attenuation at room temperature T= +25 ˚C
Please read cautions and warnings and
important notes at the end of this document.
6
February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Characteristics for CDMA 1x AWS Band
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
T
ZANT
ZRX
ZTX
= –30 ˚C to +85 ˚C
=
50 Ω
50 Ω
50 Ω
=
TX terminating impedance:
=
Characterisitcs ANT - RX
Center frequency
min.
typ.
@ 25 ˚C
2132.5
max.
fC
MHz
Maximum insertion attenuation
α
2110.0 ... 2155.0 MHz
1.8
1.8
2.6 dB
2.51) dB
2110.0 ... 2155.0 MHz
Amplitude ripple (p-p)
∆α
2110.0 ... 2155.0 MHz
0.4
1.0 dB
Input VSWR (ANT port)
2110.0 ... 2155.0 MHz
1.65
1.4
2.0
2.0
Output VSWR (RX port)
2110.0 ... 2155.0 MHz
Attenuation
α
0.3 ... 1310.0 MHz
1310.0 ... 1355.0 MHz
1710.0 ... 1755.0 MHz
1910.0 ... 1955.0 MHz
2400.0 ... 2500.0 MHz
3820.0 ... 3910.0 MHz
4220.0 ... 4370.0 MHz
5530.0 ... 5665.0 MHz
30
38
46
27
25
19
20
20
42
42
51
33
35
39
32
27
dB
dB
dB
dB
dB
dB
dB
dB
1)
Maximum insertion attenuation at room temperature T= +25 ˚C
Please read cautions and warnings and
important notes at the end of this document.
7
February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Characteristics for CDMA 1x AWS Band
Temperature range for specification:
Antenna terminating impedance:
RX terminating impedance:
T
ZANT
ZRX
ZTX
= –30 ˚C to +85 ˚C
=
50 Ω
50 Ω
50 Ω
=
TX terminating impedance:
=
Characterisitcs TX - RX
min.
typ.
max.
@ 25 ˚C
Isolation
α
1710.0 ... 1755.0 MHz
52
45
56
51
dB
dB
2110.0 ... 2155.0 MHz
Please read cautions and warnings and
important notes at the end of this document.
8
February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Maximum ratings
Storage temperature range Tstg
–40/+85 ˚C
DC voltage
VDC
VESD
PIN
5
501)
V
V
machine model, 10 pulses
ESD voltage
Input power at
source and load impedance 50 Ω
continuous wave
T = 55˚C, 5000 h
1710.0 ... 1755.0 MHz
elsewhere
29
10
dBm
dBm
}
1)
acc. to JESD22-A115A (machine model), 10 negative & 10 positive pulses.
Annotation for characteristics section
Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by
∞
Sds21(f)HRRC(f – fCarrier) 2df
∫
∞
fCarrier according to 3GPP TS 25.101 (e.g. for UMTS-Passband, fCarrier ranges from 2112.4 MHz
(lowest Rx channel) to 2167.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the
root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following
normalization:
∞
HRRC(f) 2df= 1
∫
∞
Please read cautions and warnings and
important notes at the end of this document.
9
February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Frequency Response TX-ANT (Power Transfer Function)
Frequency Response TX-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
10 February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Frequency Response RX-ANT (Power Transfer Function)
Frequency Response RX-ANT (wideband)
Please read cautions and warnings and
important notes at the end of this document.
11 February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
Frequency Response TX-RX (Power Transfer Function)
Frequency Response TX-RX (wideband)
Please read cautions and warnings and
important notes at the end of this document.
12 February 04, 2010
SAW Components
SAW Duplexer
Data Sheet
B7699
1732.5/2132.5 MHz
References
Type
B7699
Ordering code
Marking and package
Packaging
B39212B7699P810
C61157-A3-A67
F61074-V8153-Z000
L_1126
Date codes
B7699_NB.s3p
S-parameters
B7699_WB.s3p
See file header for pin/port assignments
Soldering profile
RoHS compatible
S_6001
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maxi-
mum concentration values for certain hazardous substances in
electrical and electronic equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
EPCOS AG 2010. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
13 February 04, 2010
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
2. We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
3. The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Conse-
quently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, MiniBlue, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube,
PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID,
SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
14 February 04, 2010
相关型号：
©2020 ICPDF网 联系我们和版权申明