B59250T0080A010 [EPCOS]

RESISTOR, TEMPERATURE DEPENDENT, PTC, 28ohm, THROUGH HOLE MOUNT, ROHS COMPLIANT;


型号：	B59250T0080A010
厂家：	EPCOS
描述：	RESISTOR, TEMPERATURE DEPENDENT, PTC, 28ohm, THROUGH HOLE MOUNT, ROHS COMPLIANT 消磁电阻器
文件：	总9页 (文件大小：361K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PTC thermistors for degaussing

Dual PTC thermistors

Series/Type:

B59***

Date:

March 2006

information contained therein without EPCOS' prior express consent is prohibited.

Degaussing

Dual PTC thermistors

Applications

Degaussing of picture tubes

Dimensional drawings

Thermoplast housing for type:

T104, T108, T209, T250

Features

Two PTC thermistors in a plastic case

(3-pin)

Low residual current through coil due to

double PTC configuration

Marked with manufacturer's logo, type

designation and date code

Flame-retardant case material (UL 94 V-0)

Solderability to IEC 60068-2-20 (test t_a,

methode 1)

Stable performance throughout a large

number of switching cycles owing to clamp

contacting

VDE approval for T209, T709, T104, T704,

T108, T608 and T250 (license number

128911)

Phenolic resin (Duroplast) housing for type:

T608, T704, T705, T709

UL approval for T705 and T709 to UL 1434

(file number E69802)

CECC 60738-1-3-001 approval

RoHS-compatible

Delivery mode

Packed in blister trays

Circuit diagram

Please read Important notes and

Page 2 of 9

Cautions and warnings at the end of this document.

Degaussing

Dual PTC thermistors

Hole arrangement A

Hole arrangement B

General technical data

Max. operating voltage

Rated voltage

Operating temperature range

V_max

V_R

T_op

270

230

ꢀ25/+125

0/+60

VAC

°C

(V = 0)

(V = V_R)

°C

Electrical specifications and ordering codes

Type R_R

R_coil

I_in,coil

I_r,coil

Housing¹⁾Decay²⁾Ordering code

(0 s) (180 s) (V = V_R,

25 °C ≤ T_op≤ 60 °C)

Ω

A_pp

mA_pp

Hole arrangement = A

T209

T709

T704

T108

T608

T250

≥ 20

≥ 14

≥ 10

≥ 25

≥ 18

≥ 24

≥ 25

≥ 20

≥ 10

≤ 8

≤ 4

≤ 3

≤ 4

B59209T0080A010

B59709T0060A110

B59704T0080A110

B59108T0080A010

B59608T0080A110

B59250T0080A010

Hole arrangement = B

T705

T209

T709

T104

T108

T608

4.5

≥ 20

≥ 14

≥ 10

≥ 24

≥ 18

≥ 24

≥ 25

≥ 20

≤ 5

≤ 8

≤ 4

≤ 7

≤ 4

≤ 3

B59705T0060B110

B59209T0080B110

B59709T0060B110

B59104T0080B010

B59108T0080B010

B59608T0080B110

1) T: Thermoplast housing; D: Phenolic resin (Duroplast) housing

2) SD: Standard decay behavior; LD: Long decay behavior

Please read Important notes and

Page 3 of 9

Cautions and warnings at the end of this document.

Degaussing

Dual PTC thermistors

Reliability data

Test

Standard

Test conditions

ꢁ∆R₂₅/R₂₅ꢁ

Electrical endurance, IEC 60738-1

cycling

Room temperature, V_max;R_S

Number of cycles: 10 000

< 20%

Electrical endurance, IEC 60738-1

constant

Storage at V_max/T_op

Test duration : 1000 h

< 20%

Damp heat

IEC 60738-1

Temperature of air: 40 °C

Relative humidity of air: 93%

Duration: 56 days

Test according to IEC 60068-2-78

Rapid change

of temperature

T = T_LCT, T = T_UCT

Number of cycles: 5

Test duration: 30 min

Test according to IEC 60068-2-14, Test Na

< 20%

Vibration

Frequency: 10 - 55 - 10 Hz

Displacement amplitude: 0.75 mm

Test duration: 3 · 2 h

Test according to IEC 60028-2-6, Test Fc

Bump

Pulse shape: half-sine

Acceleration: 40 g

Pulse duration: 6 ms; 6 · 4000 pulses

Test according to IEC 60068-2-29

Climatic sequence

Dry heat: T = T_UCT

Test duration: 16 h

Damp heat first cycle

Cold: T = T_LCT

Test duration: 2 h

Damp heat 5 cycles

Tests performed according to

IEC 60068-2-30

Please read Important notes and

Page 4 of 9

Cautions and warnings at the end of this document.

Degaussing

Dual PTC thermistors

Characteristics

Typical curve of demagnetization current I_in,coilmeasured at V_R

Coil resistance: 20 Ω (T705, T209), 10 Ω (T608), 25 Ω (T250)

Ambient temperature: 25 °C

Please read Important notes and

Page 5 of 9

Cautions and warnings at the end of this document.

Degaussing

Dual PTC thermistors

Characteristics

Typical curve of demagnetization current I_in,coilmeasured at V_R

Coil resistance: 14 Ω (T709), 10 Ω (T104, T704, T108)

Ambient temperature: 25 °C

Please read Important notes and

Page 6 of 9

Cautions and warnings at the end of this document.

Degaussing

Dual PTC thermistors

Cautions and warnings

General

EPCOS thermistors are designed for specific applications and should not be used for purposes

not identified in our specifications, application notes and data books unless otherwise agreed

with EPCOS during the design-in-phase.

Ensure suitability of thermistor through reliability testing during the design-in phase. The

thermistors should be evaluated taking into consideration worst-case conditions.

Storage

Store thermistors only in original packaging. Do not open the package before storage.

Storage conditions in original packaging: storage temperature ꢀ25 °C ... +45 °C, relative

humidity ≤75% annual mean, maximum 95%, dew precipitation is inadmissible.

Avoid contamination of thermistors surface during storage, handling and processing.

Avoid storage of thermistor in harmful environment with effect on function on long-term

operation (examples given under operation precautions).

Use thermistor within 6 months after delivery.

Handling

PTCs must not be dropped. Chip-offs must not be caused during handling of PTCs.

Components must not be touched with bare hands. Gloves are recommended.

Avoid contamination of thermistor surface during handling.

Soldering

Use rosin-type flux or non-activated flux.

Insufficient preheating may cause ceramic cracks.

Rapid cooling by dipping in solvent is not recommended.

Complete removal of flux is recommended.

Mounting

Electrode must not be scratched before/during/after the mounting process.

Contacts and housing used for assembly with thermistor have to be clean before mounting.

Especially grease or oil must be removed.

When PTC thermistors are encapsulated with sealing material, the precautions given in chapter

"Mounting instructions", "Sealing and potting" must be observed.

When the thermistor is mounted, there must not be any foreign body between the electrode of

the thermistor and the clamping contact.

The minimum force of the clamping contacts pressing against the PTC must be 10 N.

During operation, the thermistor’s surface temperature can be very high. Ensure that adjacent

components are placed at a sufficient distance from the thermistor to allow for proper cooling at

the thermistors.

Ensure that adjacent materials are designed for operation at temperatures comparable to the

surface temperature of thermistor. Be sure that surrounding parts and materials can withstand

this temperature.

Avoid contamination of thermistor surface during processing.

Please read Important notes and

Page 7 of 9

Cautions and warnings at the end of this document.

Degaussing

Dual PTC thermistors

Operation

Use thermistors only within the specified temperature operating range.

Use thermistors only within the specified voltage and current ranges.

Environmental conditions must not harm the thermistors. Use thermistors only in normal

atmospheric conditions. Avoid use in deoxidizing gases (chlorine gas, hydrogen sulfide gas,

ammonia gas, sulfuric acid gas etc), corrosive agents, humid or salty conditions.Contact with

any liquids and solvents should be prevented.

Be sure to provide an appropriate fail-safe function to prevent secondary product damage

caused by abnormal function (e.g. use VDR for limitation of overvoltage condition).

Please read Important notes and

Page 8 of 9

Cautions and warnings at the end of this document.

Important notes

The following applies to all products named in this publication:

1. Some parts of this publication contain statements about the suitability of our products for

certain areas of application. These statements are based on our knowledge of typical re-

quirements that are often placed on our products in the areas of application concerned. We

nevertheless expressly point out that such statements cannot be regarded as binding

statements about the suitability of our products for a particular customer application.

As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar

with them than the customers themselves. For these reasons, it is always ultimately incum-

bent on the customer to check and decide whether an EPCOS product with the properties de-

scribed in the product specification is suitable for use in a particular customer application.

2. We also point out that in individual cases, a malfunction of passive electronic compon-

ents or failure before the end of their usual service life cannot be completely ruled out

in the current state of the art, even if they are operated as specified. In customer applica-

tions requiring a very high level of operational safety and especially in customer applications

in which the malfunction or failure of a passive electronic component could endanger human

life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured

by means of suitable design of the customer application or other action taken by the customer

(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by

third parties in the event of malfunction or failure of a passive electronic component.

3. The warnings, cautions and product-specific notes must be observed.

4. In order to satisfy certain technical requirements, some of the products described in this

publication may contain substances subject to restrictions in certain jurisdictions (e.g.

because they are classed as “hazardous”). Useful information on this will be found in our

Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more

detailed questions, please contact our sales offices.

5. We constantly strive to improve our products. Consequently, the products described in this

publication may change from time to time. The same is true of the corresponding product

specifications. Please check therefore to what extent product descriptions and specifications

contained in this publication are still applicable before or when you place an or-

der.

We also reserve the right to discontinue production and delivery of products. Con-

sequently, we cannot guarantee that all products named in this publication will always be

available.

6. Unless otherwise agreed in individual contracts, all orders are subject to the current ver-

sion of the “General Terms of Delivery for Products and Services in the Electrical In-

dustry” published by the German Electrical and Electronics Industry Association

(ZVEI).

7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,

PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are

trademarks registered or pending in Europe and in other countries. Further information will

be found on the Internet at www.epcos.com/trademarks.

Page 9 of 9

B59250T0080A010 [EPCOS]

相关型号：

B59250T0080B010

B59251-T80-A10

B59251-T80-B10

B593-2T

B59300

B59300-M1060-A70

B59300-M1070-A70

B59300-M1080-A70

B59300-M1090-A70

B59300-M1100-A70

B59300-M1110-A70

B59300-M1120-A70