AP2171DFMG-7 [DIODES]
1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE; 与输出放电1A单通道限流电源开关
| 型号： | AP2171DFMG-7 |
| 厂家： | 
DIODES INCORPORATED |
| 描述： | 1A SINGLE CHANNEL CURRENT-LIMITED POWER SWITCH WITH OUTPUT DISCHARGE |
| 文件： | 总18页 (文件大小：533K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Description
Pin Assignments
The AP2161D and AP2171D are integrated high-side power
switches optimized for Universal Serial Bus (USB) and other
hot-swap applications. The family of devices complies with
USB 2.0 and available with both polarities of Enable input.
They offer current and thermal limiting and short circuit
protection as well as controlled rise time and under-voltage
lockout functionality. A 7ms deglitch capability on the open-
drain Flag output prevents false over-current reporting and
does not require any external components.
( Top View )
1
2
3
4
8
7
6
5
NC
GND
IN
OUT
OUT
FLG
IN
All devices are available in SOT25, SO-8, MSOP-8-EP, and
DFN2018-6 packages.
EN
SO-8
Features
( Top View )
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Single USB port power switches with output discharge
Over-current and thermal protection
1.5A accurate current limiting
NC
1
2
8
7
6
GND
OUT
OUT
FLG
IN
Fast transient response
Reverse Current Blocking
3
4
IN
90mΩ on-resistance
EN
5
Input voltage range: 2.7V – 5.5V
0.6ms typical rise time
MSOP-8-EP
Very low shutdown current: 1uA (max)
Fault report (FLG) with blanking time (7ms typ)
ESD protection: 4KV HBM, 300V MM
Active high (AP2171D) or active low (AP2161D) enable
Ambient temperature range -40ºC to 85°C
( Top View )
1
5
4
SOT25, SO-8, MSOP-8-EP (Exposed Pad), and
DFN2018-6: Available in “Green” Molding Compound
OUT
IN
(No Br, Sb)
2
3
GND
FLG
•
•
•
Lead Free Finish / RoHS Compliant (Note 1)
UL Recognized, File Number E322375 (pending)
IEC60950-1 CB Scheme Certified
EN
SOT25
Applications
( Top View )
•
Consumer electronics – LCD TV & Monitor, Game
Machines
Communications – Set-Top-Box, GPS, Smartphone
Computing – Laptop, Desktop, Servers, Printers, Docking
Station, HUB
1
6
5
4
GND
IN
OUT
OUT
FLG
•
•
2
3
EN
DFN2018-6
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at
http://www.diodes.com/products/lead_free.html.
1 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Application Circuit
AP2171D Enable Active High
IN
Load
OUT
Power Supply
2.7V to 5.5V
0.1uF
0.1uF
10uF
ON
10k
120uF
FLG
EN
GND
OFF
Available Options
Current limit
(typical)
Recommended maximum
continuous load current
Part Number
Channel
Enable pin (EN)
AP2161D
AP2171D
1
1
Active Low
Active High
1.5A
1.5A
1A
1A
Pin Descriptions
Pin Number
Pin
SO-8
Name
Descriptions
SOT25
DFN2018-6
MSOP-8-EP
GND
IN
1
2
1
Ground
2, 3
4
Voltage input pin (all IN pins must be tied together externally)
Enable input, active low (AP2161D) or active high (AP2171D)
5
4
2
3
EN
Over-current and over-temperature fault report; open-drain
flag is active low when triggered
FLG
5
3
4
Voltage output pin (all OUT pins must be tied together
externally)
OUT
NC
6, 7
8
1
5, 6
N/A
N/A
No internal connection; recommend tie to OUT pins
2 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Functional Block Diagram
Current
Sense
IN
OUT
Discharge
Control
UVLO
Current
Limit
Driver
EN
FLG
Deglitch
Thermal
Sense
GND
Absolute Maximum Ratings
Symbol
Parameter
Ratings
Unit
ESD HBM
ESD MM
VIN
Human Body Model ESD Protection
Machine Model ESD Protection
Input Voltage
4
300
KV
V
6.5
V
V
VOUT
Output Voltage
VIN + 0.3
6.5
VEN , VFLG
Iload
Enable Voltage
V
A
Maximum Continuous Load Current
Maximum Junction Temperature
Storage Temperature Range (Note 2)
Internal Limited
150
TJmax
°C
°C
TST
-65 to 150
Notes: 2. UL Recognized Rating from -30°C to 70°C (Diodes qualified TST from -65°C to 150°C)
Recommended Operating Conditions
Symbol
VIN
Parameter
Min
Max
5.5
1.0
85
Unit
V
A
Input voltage
Output Current
2.7
0
-40
IOUT
TA
Operating Ambient Temperature
°C
3 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Electrical Characteristics (TA = 25oC, VIN = +5.0V, unless otherwise stated)
Symbol
Parameter
Input UVLO
Test Conditions
Min Typ. Max
Unit
V
1.6
1.9
0.5
45
2.5
1
VUVLO
Input Shutdown Current
Input Quiescent Current
Input Leakage Current
Reverse Leakage Current
Disabled, IOUT= 0
Enabled, IOUT= 0
μA
μA
μA
μA
ISHDN
IQ
ILEAK
IREV
70
1
Disabled, OUT grounded
0.1
0.1
Disabled, VIN= 0V, VOUT= 5V, IREV at VIN
1
SOT25, MSOP-8-EP,
SO-8
TA = 25°C
95
90
115
VIN = 5V,
DFN2018-6
110
140
140
170
IOUT= 1A
RDS(ON) Switch on-resistance
mΩ
-40°C ≤ TA ≤ 85°C
TA = 25°C
VIN = 3.3V,
IOUT= 1A
120
-40°C ≤ TA ≤ 85°C
ISHORT Short-Circuit Current Limit
1.2
1.5
2.0
A
A
Enabled into short circuit, CL=22μF
VIN= 5V, VOUT= 4.0V, CL=120μF,-40°C ≤ TA
≤85°C
ILIMIT
Over-Load Current Limit
1.1
2
1.9
ITrig
VIL
Current limiting trigger threshold
EN Input Logic Low Voltage
EN Input Logic High Voltage
EN Input leakage
A
V
Output Current Slew rate (<100A/s) , CL=22μF
VIN = 2.7V to 5.5V
0.8
1
VIH
VIN = 2.7V to 5.5V
V
ISINK
VEN = 5V
μA
ms
ms
ms
ms
Ω
TD(ON) Output turn-on delay time
TR Output turn-on rise time
TD(OFF) Output turn-off delay time
0.05
0.6
0.05
0.05
20
CL=1μF, Rload=10Ω
1.5
CL=1μF, Rload=10Ω
CL=1μF, Rload=10Ω
TF
Output turn-off fall time
0.1
40
15
CL=1μF, Rload=10Ω
RFLG
FLG output FET on-resistance IFLG =10mA
TBlank FLG blanking time
4
7
ms
Ω
CIN=10uF, CL=22μF
RDIS
TDIS
Discharge resistance (Note 3)
Discharge Time
VIN = 5V, disabled, IOUT= 1mA
CL= 1µF, VIN = 5V, disabled to VOUT < 0.5V
Enabled, Rload=1kΩ
100
0.6
140
25
ms
°C
°C
TSHDN Thermal Shutdown Threshold
THYS
Thermal Shutdown Hysteresis
SOT25 (Note 4)
170
127
67
SO-8 (Note 4)
Thermal Resistance Junction-to-
Ambient
oC/W
θJA
MSOP-8-EP (Note 5)
DFN2018-6 (Note 5)
70
Notes:
3. The discharge function is active when the device is disabled (when enable is de-asserted). The discharge function offers a resistive discharge path
for the external storage capacitor.
4. Device mounted on FR-4 4 substrate PCB, 2oz copper, with minimum recommended pad layout.
5. Device mounted on 2” x 2” FR-4 substrate PCB, 2oz copper, with minimum recommended pad on top layer and thermal vias to bottom layer ground
plane.
4 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics
VEN
VEN
50%
50%
50%
50%
TD(OFF)
TD(OFF)
TR
TR
TF
TF
TD(ON)
TD(ON)
90%
90%
90%
90%
VOUT
VOUT
10%
10%
10%
10%
Figure 1. Voltage Waveforms: AP2161D (left), AP2171D (right)
All Enable Plots are for AP2171D Active High
Turn-On Delay and Rise Time
Turn-Off Delay and Fall Time
Ven
5V/div
Ven
5V/div
Vout
2V/div
C =1uF
L
T
=25°C
A
C =1uF
L
R =10ꢀ
L
T
=25°C
A
Vout
2V/div
R =10ꢀ
L
100us/div
100us/div
Turn-On Delay and Rise Time
Turn-Off Delay and Fall Time
Ven
5V/div
Ven
5V/div
Vout
2V/div
C =120uF
L
T
=25°C
A
C =120uF
L
R =10ꢀ
L
T
=25°C
A
R =10ꢀ
L
Vout
2V/div
500us/div
500us/div
5 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics (Continued)
Short Circuit Current,
Device Enabled Into Short
Short Circuit with Blanking Time and Recovery
Vout
5V/div
Vflag
2V/div
Ven
5V/div
VIN=5V
TA=25°C
CL=22uF
VIN=5V
TA=25°C
CL=22uF
Iout
500mA/div
Iout
1A/div
100us/div
20ms/div
2 Ω Load Connected to Enabled Device
1 Ω Load Connected to Enabled Device
Vflag
2V/div
Vflag
2V/div
V
IN=5V
VIN=5V
TA=25°C
CL=22uF
TA=25°C
CL=22uF
Iout
1A/div
Iout
1A/div
1ms/div
1ms/div
Power On
Power Off
TA=25°C
CL=120uF
RL=10ꢀ
Vflag
Vflag
5V/div
5V/div
TA=25°C
CL=120uF
Iout
RL=10ꢀ
500mA/div
Iout
500mA/div
Ven
5V/div
Ven
5V/div
Vout
Vout
5V/div
5V/div
20ms/div
2ms/div
6 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics (Continued)
UVLO Increasing
UVLO Decreasing
TA=25°C
CL=22uF
RL=10ꢀ
TA=25°C
CL=22uF
RL=10ꢀ
Vin
2V/div
Vin
2V/div
Iout
500mA/div
Iout
500mA/div
20ms/div
2ms/div
Discharge Time
No Load Resistance
Inrush Current
TA=25°C
VIN=5V
No Load
Resistance
VIN=5V
TA=25°C
RL=10ꢀ
Vout
2V/div
CL=470uF
CL=120uF
CL=680uF
CL=220uF
Iin
400mA/div
CL=100uF
CL=22uF
Ven
2V/div
Ven
5V/div
1ms/div
100ms/div
Turn-On Time vs Input Voltage
Turn-Off Time vs Input Voltage
800
700
600
500
400
300
200
100
31
31
30
30
29
29
28
CL=1uF
RL=10ꢀ
TA=25°C
CL=1uF
RL=10ꢀ
TA=25°C
0
28
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
Input Voltage (V)
Input Voltage (V)
7 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics (Continued)
Rise Time vs Input Voltage
Fall Time vs Input Voltage
600
500
400
300
200
100
0
25
24
23
22
21
20
19
CL=1uF
RL=10ꢀ
TA=25°C
CL=1uF
RL=10ꢀ
TA=25°C
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
1.5
2
2.5
3
3.5
4
4.5
5
5.5
6
Input Voltage (V)
Input Voltage (V)
Supply Current, Output Enabled vs Ambient Temperature
Supply Current, Output Disabled vs Ambient Temperature
65
60
55
50
45
40
35
30
1.60
1.40
1.20
1.00
0.80
0.60
0.40
0.20
0.00
Vin=5.5V
Vin=5.0V
Vin=5.5V
Vin=5.0V
Vin=3.3V
Vin=2.7V
Vin=2.7V
Vin=3.3V
40
-45
-25
-5
15
35
55
75
95
-60
-40
-20
0
20
60
80
100
Ambient Temperature (°C)
Ambient Temperature (°C)
Static Drain-Source On-State Resistance vs Ambient
Temperature
Short-Circuit Output Current vs Ambient Temperature
710
700
690
680
670
660
650
640
630
200
190
180
170
160
150
140
130
120
110
100
Vin=3.3V
Vin=5.0V
Vin=2.7V
Vin=2.7V
Vin=3.3V
Vin=5.5V
60
Vin=5V
60
-60
-40
-20
0
20
40
80
100
-60
-40
-20
0
20
40
80
100
Ambient Temperature (°C)
Ambient Temperature (°C)
8 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Typical Performance Characteristics (Continued)
Undervoltage Lockout vs Ambient Temperature
Threshold Trip Current vs Input Voltage
2.05
2.04
2.03
2.02
2.01
2.00
1.99
1.98
1.97
1.96
1.95
1.15
1.14
1.13
1.12
1.11
1.10
UVLO Rising
UVLO Falling
T
=25°C
A
C =22uF
L
-60
-40
-20
0
20
40
60
80
100
2.8
3.3
3.8
4.3
4.8
5.3
Input Voltage (V)
Ambient Temperature (°C)
9 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Application Note
The AP2161D and AP2171D are integrated high-side power switches optimized for Universal Serial Bus (USB)
that requires protection functions. The power switches are equipped with a driver that controls the gate voltage
and incorporates slew-rate limitation. This, along with the various protection features and special functions, makes
these power switches ideal for hot-swap or hot-plug applications.
Protection Features:
Under-voltage Lockout (UVLO)
Under-voltage lockout function (UVLO) guarantees that the internal power switch is initially off during start-up. The
UVLO functions only when the switch is enabled. Even if the switch is enabled, the switch is not turned ON until
the power supply has reached at least 1.9V. Whenever the input voltage falls below approximately 1.9V, the
power switch is turned off. This facilitates the design of hot-insertion systems where it is not possible to turn off the
power switch before input power is removed.
Over-current and Short Circuit Protection
An internal sensing FET is employed to check for over-current conditions. Unlike current-sense resistors, sense
FETs do not increase the series resistance of the current path. When an over-current condition is detected, the
device maintains a constant output current and reduces the output voltage accordingly. Complete shutdown
occurs only if the fault stays long enough to activate thermal limiting.
The different overload conditions and the corresponding response of the AP2161D/2171D are outlined below:
S.NO Conditions
Explanation
Behavior of the AP2161D/2171D
1
Short circuit condition
at start-up
Output is shorted before The IC senses the short circuit and immediately
input voltage is applied or clamps output current to a certain safe level
before the part is enabled namely ILIMIT.
2
Short-circuit or over-
current condition
Short-Circuit or Overload
condition that occurs
when the part is enabled.
• At the instance the overload occurs, higher
current may flow for a very short period of
time before the current limit function can
react.
• After the current limit function has tripped
(reached the over-current trip threshold), the
device switches into current limiting mode
and the current is clamped at ILIMIT
.
3
Gradual increase from
nominal operating
current to ILIMIT
Load increases gradually The current rises until ITRIG or thermal limit.
until the current-limit
threshold.(ITRIG
Once the threshold has been reached, the
device switches into its current limiting mode
)
and is set at ILIMIT
.
Note that when the output has been shorted to GND at extremely low temperature (< -30oC), a minimum 120-μF
electrolytic capacitor on the output pin is recommended. A correct capacitor type with capacitor voltage rating and
temperature characteristics must be properly chosen so that capacitance value does not drop too low at the
extremely low temperature operation. A recommended capacitor should have temperature characteristics of less
than 10% variation of capacitance change when operated at extremely low temp. Our recommended aluminum
electrolytic capacitor type is Panasonic FC series.
10 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Application Note (Continued)
Thermal Protection
Thermal protection prevents the IC from damage when the die temperature exceeds safe margins. This mainly
occurs when heavy-overload or short-circuit faults are present for extended periods of time. The
AP2161D/AP2171D implements a thermal sensing to monitor the operating junction temperature of the power
distribution switch. Once the die temperature rises to approximately 140°C, the Thermal protection feature gets
activated as follows: The internal thermal sense circuitry turns the power switch off and the FLG output is asserted
thus preventing the power switch from damage. Hysteresis in the thermal sense circuit allows the device to cool
down to approximately 25°C before the output is turned back on. This built-in thermal hysteresis feature is an
excellent feature, as it avoids undesirable oscillations of the thermal protection circuit. The switch continues to
cycle in this manner until the load fault is removed, resulting in a pulsed output. The FLG open-drain output is
asserted when an over-current occurs with 7-ms deglitch.
Reverse Current Protection
In a normal MOSFET switch, current can flow in reverse direction (from the output side to the input side) when the
output side voltage is higher than the input side, even when the switch is turned off. A reverse-current blocking
feature is implemented in the AP21x1 series to prevent such back currents. This circuit is activated by the
difference between the output voltage and the input voltage. When the switch is disabled, this feature blocks
reverse current flow from the output back to the input.
Special Functions:
Discharge Function
When enable is de-asserted, the discharge function is active. The output capacitor is discharged through an
internal NMOS that has a discharge resistance of 100ꢀ. Hence, the output voltage drops down to zero. The time
taken for discharge is dependent on the RC time constant of the resistance and the output capacitor.
FLG Response
The FLG open-drain output goes active low for any of the two conditions: Over-Current or Over-Temperature. The
time from when a fault condition is encountered to when the FLG output goes low is 7-ms (TYP). The FLG output
remains low until both over-current and over-temperature conditions are removed. Connecting a heavy capacitive
load to the output of the device can cause a momentary Over-current condition, which does not trigger the FLG
due to the 7-ms deglitch timeout. This 7-ms timeout is also applicable for Over-current recovery and Thermal
recovery. The AP2161D/AP2171D is designed to eliminate erroneous Over-current reporting without the need for
external components, such as an RC delay network.
Applications Information:
Power Supply Considerations
A 0.01-μF to 0.1-μF X7R or X5R ceramic bypass capacitor between IN and GND, close to the device, is
recommended. This limits the input voltage drop during line transients. Placing a high-value electrolytic capacitor
on the input (10-μF minimum) and output pin(s) is recommended when the output load is heavy. This precaution
also reduces power-supply transients that may cause ringing on the input. Additionally, bypassing the output with
a 0.01-μF to 0.1-μF ceramic capacitor improves the immunity of the device to short-circuit transients. This
capacitor also prevents output from going negative during turn-off due to inductive parasitics.
11 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Application Note (Continued)
Power Dissipation and Junction Temperature
The low on-resistance of the internal MOSFET allows the small surface-mount packages to pass large current.
Using the maximum operating ambient temperature (TA) and RDS(ON), the power dissipation can be calculated by:
PD = RDS(ON)× I2
Finally, calculate the junction temperature:
TJ = PD x RθJA + TA
Where:
TA= Ambient temperature °C
RθJA = Thermal resistance
PD = Total power dissipation
Generic Hot-Plug Applications
In many applications it may be necessary to remove modules or pc boards while the main unit is still operating.
These are considered hot-plug applications. Such implementations require the control of current surges seen by
the main power supply and the card being inserted. The most effective way to control these surges is to limit and
slowly ramp the current and voltage being applied to the card, similar to the way in which a power supply normally
turns on. Due to the controlled rise times and fall times of the AP2161D/AP2171D, these devices can be used to
provide a softer start-up to devices being hot-plugged into a powered system. The UVLO feature of the
AP2161D/AP2171D also ensures that the switch is off after the card has been removed, and that the switch is off
during the next insertion.
By placing the AP2161D/AP2171D between the VCC input and the rest of the circuitry, the input power reaches
these devices first after insertion. The typical rise time of the switch is approximately 1ms, providing a slow
voltage ramp at the output of the device. This implementation controls system surge current and provides a hot-
plugging mechanism for any device.
Ordering Information
AP 21 X 1 D XX G - X
Packing
Green
Enable
Channel
Package
G : Green
6 : Active Low
7 : Active High
1 : 1 Channel
7/13 : Tape & Reel
S : SO-8
MP : MSOP-8-EP
W : SOT25
FM : DFN2018-6
7”/13” Tape and Reel
Package
Code
Packaging
(Note 6)
Device
Quantity
Part Number Suffix
AP21X1DSG-13
AP21X1DMPG-13
AP21X1DWG-7
AP21X1DFMG-7
S
MP
W
SO-8
MSOP-8-EP
SOT25
2500/Tape & Reel
2500/Tape & Reel
3000/Tape & Reel
3000/Tape & Reel
-13
-13
-7
FM
DFN2018-6
-7
Notes:
6. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
12 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Marking Information
(1) SO-8
( Top View )
8
7
6
5
4
1 : 1 Channel
Logo
YY : Year : 08, 09,10~
Part Number
6 : Active Low
7 : Active High
AP21X XD
YY WW X X
WW : Week : 01~52; 52
represents 52 and 53 week
X : Internal Code
G : Green
2
3
1
(2) MSOP-8-EP
( Top View )
8
1
7
6
5
A~Z : Green
MSOP-8-EP
Y : Year : 0~9
Logo
Y W X E
W : Week : a~z : 1~26 week;
A~Z : 27~52 week; Z represents
52 and 53 week
Part Number
AP21X X D
6 : Active Low
7 : Active High
1 : 1 Channel
2
3
4
(3) SOT25
( Top View )
5
4
XX : Identification code
Y : Year 0~9
W X
XX Y
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Green
1
2
3
Device
Package type
Identification Code
AP2161DW
AP2171DW
SOT25
SOT25
JC
JD
13 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Marking Information (Continued)
(4) DFN2018-6
(Top View)
XX : Identification Code
Y : Year : 0~9
XX
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
Y W X
X : A~Z : Green
Device
Package type
Identification Code
AP2161DFM
AP2171DFM
DFN2018-6
DFN2018-6
JC
JD
Package Outline Dimensions (All Dimensions in mm)
(1) Package type: SO-8
Gauge Plane
Seating Plane
0.62/0.82
Detail "A"
7°~9°
7°~9°
0.35max.
45°
Detail "A"
0°/8°
0.3/0.5
1.27typ
4.85/4.95
8x-0.60
6x-1.27
Land Pattern Recommendation
(Unit: mm)
14 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Package Outline Dimensions (Continued)
(2) Package type: MSOP-8-EP
EXPOSED PAD
(BOTTOM)
8x-0.45
6x-0.65
1
0.65Bsc.
0.22/0.38
1
Land Pattern Recommendation
(Unit:mm)
"A"
0.05
2.9/3.1
1
EXPOSED PAD
(BOTTOM)
Gauge plane
0.4/0.8
0.95Ref.
DETAIL "A"
1.65/1.95
(3) Package type: SOT25
15 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Package Outline Dimensions (Continued)
(4) Package type: DFN2018-6
0.10 C
6X-
0.08 C
Seating Plane
Side View
C
L
C
1.75/1.875
A
B
C
L
C
L
Pin #1 ID
Pin #1
1.3/1.5
C
L
4x-0.50
1.600
6x-0.25
Land Pattern Recommendation
(Unit:mm)
Top View
2X-
0.25 B
0.50Typ
0.15/0.25
0.10
C A
B
Bottom View
16 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
Taping Orientation (Note 7)
For DFN2018-6
Notes: 7. The taping orientation of the other package type can be found on our website at http://www.diodes.com/datasheets/ap02007.pdf
17 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
AP2161D/AP2171D
1A SINGLE CHANNEL CURRENT-LIMITED POWER
SWITCH WITH OUTPUT DISCHARGE
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS
DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other
changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability
arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any
license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described
herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies
whose products are represented on Diodes Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized
sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall
indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names
and markings noted herein may also be covered by one or more United States, international or foreign trademarks.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without
the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided
in the labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected
to cause the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or
systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements
concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,
notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,
Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes
Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2010, Diodes Incorporated
www.diodes.com
18 of 18
www.diodes.com
June 2010
© Diodes Incorporated
AP2161D/2171D
Document number: DS32250 Rev. 1 - 2
相关型号：
©2020 ICPDF网 联系我们和版权申明