MAC6073C [DIGITRON]
Triac; Max Peak Repetitive Reverse Voltage: 4; Max TMS Bridge Input Voltage: 30; Max DC Reverse Voltage: 2; Capacitance: 20;
| 型号： | MAC6073C |
| 厂家： | 
Digitron Semiconductors |
| 描述： | Triac; Max Peak Repetitive Reverse Voltage: 4; Max TMS Bridge Input Voltage: 30; Max DC Reverse Voltage: 2; Capacitance: 20 三端双向交流开关 |
| 文件： | 总4页 (文件大小：3573K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MAC6068C-MAC6075C
SILICON BIDIRECTIONAL THYRISTORS
High-reliability discrete products
and engineering services since 1977
FEATURES
Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number.
Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix.
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Peak repetitive off-state voltage(1)
(TJ = 110°C)
MAC6068C
25
MAC6069C
50
MAC6070C
VDRM
100
200
400
500
600
Volts
MAC6071C
MAC6073C
MAC6074C
MAC6075C
RMS on-state current (TC = 85°C)
IT(RMS)
ITSM
4.0
Amps
Amps
Peak non-repetitive surge current
(1 cycle, 60 Hz, TJ = -40 to +110°C)
30
3.6
Circuit fusing considerations (TJ = -40 to +110°C, t = 1.0 to 8.3ms)
Peak gate power
I2t
PGM
PG(AV)
TJ
A2s
Watts
Watts
°C
10
Average gate power
0.5
Operating junction temperature range
Storage temperature range
-40 to +110
-40 to +150
8.0
Tstg
°C
Mounting torque (6-32 screw) (2)
In. lb.
Note 1: Ratings apply for open gate conditions. Thyristor devices shall not be tested with a constant current source for blocking capability such that the voltage applied exceeds the rated
blocking voltage.
Note 2: Torque rating applies with use of torque washer. Mounting torque in excess of 6 in. lb. does not appreciably lower case to sink thermal resistance. Main terminal 2 and heatsink contact
pad are common.
Soldering temperatures shall not exceed 200°C for 10 seconds.
THERMAL CHARACTERISTICS
Characteristic
Symbol
RӨJC
Maximum
Unit
°C/W
°C/W
Thermal resistance, junction to case
3.5
60
Thermal resistance, junction to ambient
RӨJA
ELECTRICAL CHARACTERISTICS (TC = 25°C and either polarity of MT2 to MT1 voltage, unless otherwise noted)
Characteristic
Symbol
Min
Typ.
Max
2.0
Unit
Peak blocking current (either direction)
IDRM
mA
(Rated VDRM @ TJ = 125°C, gate open)
-
-
-
-
Peak on-state voltage (either direction)
VTM
Volts
Volts
(ITM = 6.0A peak)
2.0
Gate trigger voltage
(VD = 12V, RL = 100Ω, TJ = -40°C)
MT2(+),G(+); MT2(-),G(-), all types
MT2(+),G(-); MT2(-),G(+), all types
-
-
1.4
1.4
2.5
2.5
VGT
Ω, T
(VD = Rated VDRM, RL = 10k
J = 110°C)
MT2(+),G(+); MT2(-),G(-), all types
MT2(+),G(-); MT2(-),G(+), all types
0.2
0.2
-
-
-
-
Rev. 20130213
MAC6068C-MAC6075C
SILICON BIDIRECTIONAL THYRISTORS
High-reliability discrete products
and engineering services since 1977
Holding current (either direction)
(VD = 12V, gate open, TJ = -40°C, initiating current = 1A)
MAC6068C-MAC6075C
IH
-
-
-
-
30
15
mA
TJ = 25°C
MAC6068C-MAC6075C
Quadrant
Characteristic
Symbol
I
II
III
IV
mA
mA
mA
mA
Peak gate trigger current
Ω, T
Ω, T
(Main terminal voltage = 12V, RL = 100
J = 25°C)
J = -40°C)
IGTM
10
20
10
20
10
20
20
40
(Main terminal voltage = 12V, RL = 100
MECHANICAL CHARACTERISTICS
Case
TO-126
Marking
Pin out:
Alpha-numeric
See below
Rev. 20130213
MAC6068C-MAC6075C
SILICON BIDIRECTIONAL THYRISTORS
High-reliability discrete products
and engineering services since 1977
Rev. 20130213
MAC6068C-MAC6075C
SILICON BIDIRECTIONAL THYRISTORS
High-reliability discrete products
and engineering services since 1977
Rev. 20130213
©2020 ICPDF网 联系我们和版权申明