CPC1977 [CLARE]
i4-PAC⑩ Power Relay; I4 -PAC ™功率继电器型号: | CPC1977 |
厂家: | CLARE |
描述: | i4-PAC⑩ Power Relay |
文件: | 总6页 (文件大小:145K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
CPC1977
i4-PAC™ Power Relay
Description
Parameter
Blocking Voltage
Rating
600
Units
VP
Clare and IXYS have combined to bring OptoMOS®
technology, reliability and compact size to a new
family of high power Solid State Relays.
Load Current, T =25ºC
A
With 5°C/W Heat Sink
No Heat Sink
On-resistance
RθJC
3.1
1.25
1
Arms
As part of this family, the CPC1977 single pole
normally open (1-Form-A) Solid State Power Relay is
rated for up to 3.1Arms continuous load current with a
5°C/W heat sink.
Ω
0.35
°C/W
The CPC1977 employs optically coupled MOSFET
technology to provide 2500Vrms of input to output
isolation. The output is constructed with efficient
MOSFET switches and photovoltaic die that use
Clare’s patented OptoMOS architecture while the
input, a highly efficient GaAlAs infrared LED provides
the optically coupled control. The combination of
low on-resistance and high load current handling
capability makes this relay suitable for a variety of
high performance switching applications.
Features
• Compact i4-PAC™ Power Package
• Low Thermal Resistance (0.35 °C/W)
• 3.1Arms Load Current with 5°C/W Heat Sink
• Electrically Non-conductive Thermal Pad for Heat
Sink Applications
• Low Drive Power Requirements
• Arc-Free With No Snubbing Circuits
• 2500Vrms Input/Output Isolation
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
The unique i4-PAC package pioneered by IXYS
allows Solid State Relays to achieve the highest load
current and power ratings. This package features
a unique IXYS process where the silicon chips are
soft soldered onto the Direct Copper Bond (DCB)
substrate instead of the traditional copper leadframe.
The DCB ceramic, the same substrate used in high
power modules, not only provides 2500Vrms isolation
but also very low thermal resistance (0.35 °C/W).
Applications
• Industrial Controls
• Motor Control
• Robotics
• Medical Equipment—Patient/Equipment Isolation
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
Approvals
• UL recognized component: File # E69938
• Certified to: UL 508
• Meters (Watt-Hour, Water, Gas)
• Transportation Equipment
• Aerospace/Defense
Ordering Information
Part #
CPC1977J
Description
i4-PAC (25 per tube)
Pin Configuration
Switching Characteristics of Normally
Open (Form A) Devices
CONTROL
+
90%
ILOAD
+
10%
TOFF
TON
RoHS
2002/95/EC
e
3
DS-CPC1977-R04
1
www.clare.com
CPC1977
Absolute Maximum Ratings
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Parameter
Blocking Voltage
Ratings
600
Units
VP
Reverse Input Voltage
Input control Current
Peak (10ms)
5
100
V
mA
A
1
Input Power Dissipation
Isolation voltage Input to Output
Operational Temperature
Storage Temperature
150
mW
Vrms
°C
2500
-40 to +85
-40 to +125
°C
Electrical absolute maximum ratings are at 25°C
Electrical Characteristics
Parameter
Conditions
TA = 25°C
Symbol
Min
Typ
Max
Units
Output Characteristics
Load Current 1
Peak
t ≤ 10ms
No Heat Sink
TC=25°C
-
-
-
-
-
-
-
15
1.25
12.25
1.4
1
AP
Continuous
IL
-
Continuous
-
Arms
Continuous
On-Resistance 2
TC=99°C
IL(99)
RON
-
0.57
-
Ω
IL=1A, IF=10mA
VL=600V
Off-State Leakage Current
Switching Speeds
Turn-On
ILEAK
1
µA
IF=20mA, VL=10V
TON
TOFF
COUT
-
-
-
7.5
20
5
ms
pF
Turn-Off
0.085
2450
Output Capacitance
Input Characteristics
Input Control Current 3
Input Dropout Current
Input Voltage Drop
Reverse Input Current
Input/Output Characteristics
Capacitance Input/Output
V=25V, f=1MHz
-
TA = 25°C
IL=1A
IF
IF
-
-
-
10
-
mA
mA
V
-
IF=5mA
VR=5V
TA = 25°C
-
0.6
0.9
-
VF
IR
1.2
-
1.4
10
µA
CI/O
-
1
-
pF
1
2
3
Higher load currents are possible with proper heatsinking.
Measurement taken within 1 second of on time.
For applications requiring high temperature operation (greater than 60ºC) an LED drive current of 20mA is recommended.
R04
2
www.clare.com
CPC1977
Thermal Characteristics
Parameter
Thermal Resistance (junction to case)
Thermal Resistance (junction to ambient)
Junction Temperature (operation)
Conditions
Symbol
RθJC
Min
-
Typ
Max
0.35
-
Units
°C/W
°C/W
°C
-
-
33
-
Free air
-
RθJA
-
TJ
-40
100
Thermal Management
Device high current characterization was performed using Kunze heat sink KU 1-159, phase change thermal
interface material KU-ALC 5, and transistor clip KU 4-499/1. This combination provided an approximate
junction-to-ambient thermal resistance of 12.5°C/W.
Heat Sink Calculation
Higher load currents are possible by using lower thermal resistance heat sink combinations.
Heat Sink Rating
2
(TJ - TA) IL(99)
•
RθJC
RθCA
=
- RθJC
IL2
TJ = Junction Temperature (°C), TJ ≤ 100°C *
TA = Ambient Temperature (°C)
IL(99) = Load Current with Case Temperature @ 99°C (Arms
)
IL = Desired Operating Load Current (Arms), IL ≤ IL(MAX)
RθJC = Thermal Resistance, Junction to Case (°C/W) = 0.35°C/W
RθCA = Thermal Resistance of Heat Sink & Thermal Interface Material , Case to Ambient (°C/W)
* Elevated junction temperature reduces semiconductor lifetime.
R04
www.clare.com
3
CPC1977
PERFORMANCE DATA*
CPC1977
Typical Blocking Voltage Distribution
(N=50,TA=25ºC)
CPC1977
Typical LED Forward Voltage Drop
(N=50,TA=25ºC, IF=10mA)
CPC1977
Typical On-Resistance Distribution
(N=50,TA=25ºC, IL=1ADC, IF=10mA)
35
30
25
20
15
10
5
35
30
25
20
15
10
5
35
30
25
20
15
10
5
0
0
0
815
820
825
830
835
840
1.30
1.31
1.32
1.33
1.34
0.54
0.55
0.56
0.57
0.58
0.59
Blocking Voltage (VP)
LED Forward Voltage (V)
On-Resistance (Ω)
CPC1977
Maximum Load Current vs.
Temperature with Heat Sink
(IF=20mA)
CPC1977
CPC1977
Typical Turn-On Time
Typical Turn-Off Time
(N=50,TA=25ºC, IL=1ADC, IF=10mA)
(N=50,TA=25ºC, IL=1ADC, IF=10mA)
8
25
20
15
10
5
25
20
15
10
5
1ºC/W
7
6
5
4
3
2
1
0
5ºC/W
10ºC/W
Free Air
0
0
0
20
40
60
80
100
0.04
0.06
0.08
0.09
0.10
0.11
6.5
7.0
7.5
8.0
8.5
9.0
Temperature (ºC)
Turn-On (ms)
Turn-Off (ms)
CPC1977
CPC1977
Typical Blocking Voltage
vs.Temperature
CPC1977
Typical Leakage vs.Temperature
at Maximum Rated Voltage
Typical Turn-On vs.Temperature
(IL=1ADC
)
(Measured across Pins 1 & 2)
14
845
840
835
830
825
820
815
810
805
0.014
0.012
0.010
0.008
0.006
0.004
0.002
0
IF = 10mA
12
10
8
6
4
2
0
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
-40
-20
0
20
40
60
80
100
Temperature (ºC)
Temperature (ºC)
Temperature (ºC)
CPC1977
Typical LED Forward Voltage Drop
vs.Temperature
CPC1977
CPC1977
Typical Turn-On vs. LED Forward Current
(IL=1ADC
Typical Turn-Off vs.Temperature
(IL=1ADC
)
)
1.8
1.6
1.4
1.2
1.0
0.8
18
16
14
12
10
8
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
IF = 50mA
I
= 20mA
6
IFF = 10mA
4
2
IF = 10mA
1
0
-40
-20
0
20
40
60
80
100
-40 -20
0
20
40
60
80 100 120
0
50
5
10 15 20 25 30 35 40 45
Temperature (ºC)
Temperature (ºC)
LED Forward Current (mA)
Unless otherwise specified, all performance data was acquired without the use of a heat sink.
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R04
4
www.clare.com
CPC1977
PERFORMANCE DATA*
CPC1977
CPC1977
Typical On-Resistance vs.Temperature
(IL=max rated)
CPC1977
Typical Turn-Off vs. LED Forward Current
(IL=1ADC)
Typical IF for Switch Operation
vs.Temperature
(IL=1ADC
)
1.8
0.18
20
18
16
14
12
10
8
1.6
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
0.17
0.16
0.15
0.14
0.12
0.12
0.10
0.08
0
6
4
2
0
-40
-20
0
20
40
60
80
100
0
5
10 15 20 25 30 35 40 45 50
-40
-20
0
20
40
60
80
100
Temperature (ºC)
Temperature (ºC)
LED Forward Current (mA)
CPC1977
CPC1977
Typical Load Current vs. Load Voltage
(TA=25ºC, IF=10mA)
Energy Rating Curve
(Free Air, No Heat Sink)
1.25
1.00
0.75
0.50
0.25
0
18
15
12
9
-0.25
-0.50
-0.75
-1.00
-1.25
6
3
0
0
10µs 100µs 1ms 10ms 100ms 1s
10s 100s
-2.0
-1.33 -0.66
0.66
1.33
2.0
Time
Load Voltage (V)
Unless otherwise specified, all performance data was acquired without the use of a heat sink.
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please
contact our application department.
R04
www.clare.com
5
CPC1977
MANUFACTURING INFORMATION
Soldering
Washing
For proper assembly, the component must be
processed in accordance with the current revision
of IPC/JEDEC standard J-STD-020. Failure to
follow the recommended guidelines may cause
permanent damage to the device resulting in impaired
performance and/or a reduced lifetime expectancy.
Clare does not recommend ultrasonic cleaning or the
use of chlorinated solvents.
RoHS
2002/95/EC
e
3
MECHANICAL DIMENSIONS
0.190 MIN - 0.205 MAX
(4.83 MIN - 5.21 MAX)
0.046 MIN - 0.085 MAX
(1.17 MIN - 2.16 MAX)
0.770 MIN - 0.799 MAX
(19.56 MIN - 20.29 MAX)
0.660 MIN - 0.690 MAX
(16.76 MIN - 17.53 MAX)
0.210 MIN - 0.244 MAX
(5.33 MIN - 6.20 MAX)
0.065 MIN - 0.080 MAX
(1.65 MIN - 2.03 MAX)
ISOLATED HEAT SINK
0.100 MIN - 0.180 MAX
(2.54 MIN - 4.57 MAX)
0.819 MIN - 0.840 MAX
(20.80 MIN - 21.34 MAX)
0.590 MIN - 0.620 MAX
(14.99 MIN - 15.75 MAX)
0.083 MIN - 0.102 MAX
(2.11 MIN - 2.59 MAX)
0.780 MIN - 0.840 MAX
(19.81 MIN - 21.34 MAX)
0.150 BSC
(3.81 BSC)
0.020 MIN - 0.029 MAX
(0.51 MIN - 0.74 MAX)
0.058 MIN - 0.068 MAX
(1.47 MIN - 1.73 MAX)
0.300 BSC
(7.62 BSC)
0.045 MIN - 0.055 MAX
(1.14 MIN - 1.40 MAX)
0.102 MIN - 0.118 MAX
(2.59 MIN - 3.00 MAX)
NOTE: Bottom heatsink meets 2500V
isolation to the other pins.
rms
Dimensions:
inches
(mm)
For additional information please visit our website at: www.clare.com
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-CPC1977-R04
©Copyright 2007, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
i4-PAC™ is a trademark of IXYS Corporation
All rights reserved. Printed in USA.
3/22/07
6
相关型号:
©2020 ICPDF网 联系我们和版权申明