MP1013 [CHERRY]
Hall-effect position sensor with convenient snap-fit mounting;型号: | MP1013 |
厂家: | CHERRY SEMICONDUCTOR CORPORATION |
描述: | Hall-effect position sensor with convenient snap-fit mounting |
文件: | 总2页 (文件大小:250K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Magnetic Proximity Sensors (Hall Effect)
MP1013 Sensors
Hall-effect position sensor with convenient snap-fit mounting
Description
The MP1 Series sensors are one-piece non-contact solid-state position sensors. The sensors operate through the use of Hall Effect
technology with magnetic fields generated by permanent magnets. They provide a sinking current output.
Features
Typical Applications
•
•
•
Solid state reliability
•
•
•
•
•
Door position & interlock
Limit switch
Flow/speed
Stable output over operating temperature range
Open collector (NPN) output can be used with bipolar or CMOS
logic circuits with suitable pull-up resistor
South pole sensitive
Home security
Pedal switch
•
•
•
•
•
•
Unipolar device (MP101301, MP101302)
Latching version available (MP101303)
RoHS compliant
Fastener-less design
IP67
Environmental Specifications
Operating / Storage Temperature (MP101301, MP101303)
Operating / Storage Temperature (MP101302)
Ingress Protection
-40 °C to 85 ⁰C (-40 ⁰F to 185 ⁰F)
-40 ⁰C to 125 °C (-40 ⁰F to 257 ⁰F)
IP67
Electrical Specifications
Operating Supply Voltage
5 to 24 VDC
4.1 mA typ., 7.5 mA max.
2.6 mA typ., 5 mA max.
25 mA max.
20 mA max.
30 VDC
Supply Current (MP101301, MP101302)
Supply Current (MP101303)
Output Current (Sink) (MP101301, MP101302)
Output Current (Sink) (MP101303)
Maximum Input Voltage (MP101301, MP101302)
Maximum Input Voltage (MP101303)
Maximum Reverse Voltage (MP101301, MP101302)
Maximum Reverse Voltage (MP101303)
Recommended Pull-Up Resistor
28 VDC
30 VDC
None
See chart
Mechanical Specifications
Housing Material
Glass-reinforced nylon plastic
245 Gauss / 60 Gauss
60 Gauss / 60 Gauss
Turn on / off (MP101301, MP101302)
Turn on / off (MP101303)*
*MP101303 is a latching sensor and releases when 60 Gauss is applied to the north pole
www.cherryswitches.com
Page 1 of 2, Last update 2016-01-05, Specifications subject to change without notice.
Products
Part Number
MP101301
Leads
24 AWG x 150 mm
24 AWG x 150 mm
24 AWG x 150 mm
MP101302*
MP101303*
*Not commonly stocked
Note: An external pull-up resistor is required, the value of which is dependent on the supply voltage. The resistor should be connected
between the output and Vcc. Refer to the wiring diagram for lead colors or pin numbering as applicable.
Recommended External Pull-Up Resistor
Volts DC
Ohms
5
9
12
15
3k
24
3k
1k
1.8k
2.4k
Open Collector Sinking Block Diagram
Dimensions mm (inches)
www.cherryswitches.com
Page 2 of 2, Last update 2016-01-05, Specifications subject to change without notice.
相关型号:
MP101INS
QUARTZ CRYSTAL RESONATOR, 10 MHz, ROHS COMPLIANT, RESISTANCE WELD, METAL, HC-49/U, 2 PIN
CTS
MP101SLV
QUARTZ CRYSTAL RESONATOR, 10 MHz, ROHS COMPLIANT, RESISTANCE WELD, METAL, HC-49/U, 2 PIN
CTS
MP101SM
QUARTZ CRYSTAL RESONATOR, 10 MHz, ROHS COMPLIANT, RESISTANCE WELD, METAL, HC-49/U, 2 PIN
CTS
MP101TW
QUARTZ CRYSTAL RESONATOR, 10 MHz, ROHS COMPLIANT, RESISTANCE WELD, METAL, HC-49/U, 2 PIN
CTS
©2020 ICPDF网 联系我们和版权申明