PS9309L2-V-AX [CEL]
Low Input Current TOTEM POLE OUTPUT TYPE HIGH CMR, IPM DRIVER, 6-PIN SDIP PHOTOCOUPLER;型号: | PS9309L2-V-AX |
厂家: | CALIFORNIA EASTERN LABS |
描述: | Low Input Current TOTEM POLE OUTPUT TYPE HIGH CMR, IPM DRIVER, 6-PIN SDIP PHOTOCOUPLER 驱动 输出元件 |
文件: | 总10页 (文件大小:1703K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
A Business Partner of Renesas Electronics Corporation.
Preliminary Data Sheet
Specifications in this document are tentative and subject to change.
March 3, 2011
PS9309L, PS9309L2
−NEPOC Series−
Low Input Current TOTEM POLE OUTPUT TYPE HIGH CMR, IPM DRIVER, 6-PIN SDIP PHOTOCOUPLER
DESCRIPTION
The PS9309L and PS9309L2 are optical coupled high-speed, totem pole output (active high output type) isolators
containing a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one
chip.
The PS9309L and PS9309L2 are specified high CMR and pulse width distortion with operating temperature. It is
suitable for IPM drive.
The PS9309L is lead bending type (Gull-wing) for surface mounting.
The PS9309L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
FEATURES
PIN CONNECTION
•
•
•
•
•
•
High common mode transient immunity (CMH, CML = 15 kV/μs MIN.)
Half size of 8-pin DIP
(Top View)
Pulse width distortion ( tPLH − tPHL = 220 ns MAX.)
High isolation voltage (BV = 5 000 Vr.m.s.)
Totem pole output (Active High Output Type)
Embossed tape product : PS9309L-E3 : 2 000 pcs/reel
: PS9309L2-E3: 2 000 pcs/reel
6
5 4
1. Anode
2. NC
3. Cathode
4. GND
5. V
6. VCC
O
•
Pb-Free product
APPLICATIONS
1
2
3
•
•
IPM Driver
General purpose inverter
TRUTH TABLE
LED
ON
Output
H
L
OFF
Page 1 of
10
Mar 3, 2011
A Business Partner of Renesas Electronics Corporation.
Preliminary document
Specifications in this document are tentative and subject to change.
PS9309L, PS9309L2
Chapter Title
PACKAGE DIMENSIONS (UNIT: mm)
Lead Bending Type (Gull-wing) For Surface Mount
PS9309L
4.58±0.3
(0.82)
9.7±0.3
7.62
.015
±
.02
1.27
0.25 M
0.8±0.25
0.4±0.1
Lead Bending Type (Gull-wing) For Long Creepage Distance (Surface Mount)
PS9309L2
4.58±0.3
(0.82)
11.5±0.3
7.62
.015
±
.02
1.27
0.25 M
0.75±0.25
0.4±0.1
Page 2 of
10
Mar 3, 2011
A Business Partner of Renesas Electronics Corporation.
Preliminary document
Specifications in this document are tentative and subject to change.
PS9309L, PS9309L2
Chapter Title
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance (MIN.)
PS9309L
PS9309L2
7 mm
7 mm
8 mm
8 mm
Outer Creepage Distance (MIN.)
Isolation Distance (MIN.)
0.4 mm
0.4 mm
MARKING EXAMPLE
R
9309
N131
Type Number
Assembly Lot
No. 1 pin Mark
N
1
31
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
Page 3 of
10
Mar 3, 2011
A Business Partner of Renesas Electronics Corporation.
Preliminary document
Specifications in this document are tentative and subject to change.
PS9309L, PS9309L2
Chapter Title
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Application
Part Number*1
PS9309L
PS9309L-AX
Pb-Free
20 pcs (Tape 20 pcs cut)
Embossed Tape 2 000
pcs/reel
PS9309L
PS9309L2
PS9309L
PS9309L-E3
PS9309L-E3-AX
(Ni/Pd/Au)
PS9309L2
PS9309L2-AX
20 pcs (Tape 20 pcs cut)
Embossed Tape 2 000
pcs/reel
PS9309L2-E3
PS9309L2-E3-AX
PS9309L-V
PS9309L-V-AX
20 pcs (Tape 20 pcs cut)
Embossed Tape 2 000
pcs/reel
PS9309L-V-E3
PS9309L-V-E3-AX
PS9309L2-V
PS9309L2-V-AX
20 pcs (Tape 20 pcs cut)
Embossed Tape 2 000
pcs/reel
PS9309L2
PS9309L2-V-E3 PS9309L2-V-E3-AX
Note: *1. For the application of the Safety Standard, following part number should be used.
Page 4 of
10
Mar 3, 2011
A Business Partner of Renesas Electronics Corporation.
Preliminary document
Specifications in this document are tentative and subject to change.
PS9309L, PS9309L2
Chapter Title
ABSOLUTE MAXIMUM RATINGS (T = 25°C, unless otherwise specified)
A
Parameter
Symbol
IF
Ratings
20
Unit
Diode
Forward Current
Reverse Voltage
Supply Voltage
Output Voltage
Output Current
Power Dissipation*2
mA
V
VR
5
Detector
VCC
VO
−0.5 to +20
−0.5 to +20
25
V
V
IO
mA
mW
Vr.m.s.
°C
PC
210
Isolation Voltage *4
BV
TA
5 000
Operating Ambient Temperature
Storage Temperature
−40 to +110
−55 to +125
Tstg
°C
Notes: *1. Reduced to 0.5 mW/°C at TA = 70°C or more.
*2. Reduced to 3.88 mW/°C at TA = 70°C or more
*3. AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-3 shorted together, 4-6 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter
Supply Voltage
Symbol
VCC
MIN.
4.5
0
TYP.
MAX.
20
Unit
V
15
Output Voltage
VO
20
V
Forward Current (ON)
Forward Voltage (OFF)
IF (ON)
VF (OFF)
4
10
mA
V
0
0.8
Page 5 of
10
Mar 3, 2011
A Business Partner of Renesas Electronics Corporation.
Preliminary document
Specifications in this document are tentative and subject to change.
PS9309L, PS9309L2
Chapter Title
ELECTRICAL CHARACTERISTICS
(TA = −40 to +110°C, VCC = 4.5 to 20 V, unless otherwise specified)
Parameter
Symbol
Conditions
IF = 10 mA, TA = 25°C
VR = 3 V, TA = 25°C
VF = 0 V, f = 1 MHZ,
TA = 25°C
MIN.
TYP.*1 MAX.
Unit
V
Diode
Forward Voltage
Reverse Current
Input Capacitance
VF
IR
1.3
1.55
1.8
10
μA
pF
Ct
30
Detector High Level Output Voltage
VOH
VCC = 4.5 V, IO = - 2.6 mA,
IF = 4 mA
2.7
V
VCC = 20 V, IO = - 2.6 mA,
IF = 4 mA
17.4
Low Level Output Voltage *2
High Level Supply Current
VOL
IO = 3.5 mA, IF = 0 mA
VCC = 4.5 V, IF = 4 mA
VCC = 20 V, IF = 4 mA
VCC = 4.5 V, IF = 0 mA
VCC = 20 V, IF = 0 mA
0.2
0.6
3
V
ICCH
mA
3
Low Level Supply Current
ICCL
IOSH
IOSL
IFLH
3
mA
mA
3
-7
7
-40
40
High Level Output Short
Circuit Current
VCC = 20 V, VO = GND,
IF = 4 mA
Low Level Output Short
Circuit Current
VCC = VO = 20 V, VF = 0 V
mA
mA
Ω
Coupled Threshold Input Current
VCC = 20 V, VO > 2.7 V,
IO = -2.6 mA
3
Isolation Resistance
RI-O
VI-O = 500 VDC, RH = 60%,
1012
TA = 25°C
Isolation Capacitance
CI-O
V = 0 V, f = 1 MHz,
TA = 25°C
0.6
pF
ns
ns
ns
Propagation Delay Time
tPHL
VCC = 20 V, CL = 15 pF,
250
250
220
(H
Propagation Delay Time
(L
H)*3
L)*3
IF = 4
VCC = 20 V, CL = 15 pF,
IF = 0 4 mA, VTHLH = 1.3 V
VCC = 20 V, CL = 15 pF,
IF = 4 0 mA
0 mA, VTHHL = 1.3 V
tPLH
Pulse Width Distortion
(PWD)
tPLH-tPHL
Maximum Propagation
Delays
Rise Time (10-90%)*3
tr
tf
VCC = 20 V, CL = 15 pF,
IF = 0 4 mA
VCC = 20 V, CL = 15 pF,
IF = 4 0 mA
30
30
ns
ns
Fall Time (90-10%)*3
Common Mode
CMH
VCC = 5 V, TA = 25°C,
IF = 4 mA, VCM = 1.0 kV
15
15
kV/μs
Transient Immunity at High
Level Output*4
Common Mode
CML
VCC = 5 V, TA = 25°C,
kV/μs
Transient Immunity at Low
IF = 0 mA, VCM = 1.0 kV
Level Output*4
Notes: *1. Typical values at TA = 25°C
*2. Because VO of 2.4 V may be output when the LED current is not input and when output supply of VCC = 4.5 V or
less, it is important to confirm the characteristics (operation with the power supply on and off) during design,
before using this device.
Page 6 of
10
Mar 3, 2011
A Business Partner of Renesas Electronics Corporation.
Preliminary document
Specifications in this document are tentative and subject to change.
PS9309L, PS9309L2
Chapter Title
*3. Test circuit for propagation delay time
Pulse input (I
(PW = 1 s,
F
)
IF (ON)
μ
Input
50%
V
CC = 20 V
1
2
3
6
5
4
Duty cycle = 1/10)
0.1
μF
I
F
V
O
(monitor)
t
PLH
t
PHL
Input
(monitor)
V
OH
Output
90%
10%
CL
= 15 pF
47 Ω
1.3 V
VO
V
OL
t
r
t
f
Remark C includes probe and stray wiring capacitance.
L
*4. Test circuit for common mode transient immunity
I
F
1 kV
VCM
V
CC = 5 V
90%
10%
1
2
3
6
5
4
SW
0.1μF
V
O
(monitor)
t
r
t
f
V
O
V
2.4 V
OH
V
CM
(I
F
= 10 mA)
= 0 mA)
0.35 V
V
O
V
OL
(I
F
Remark CL includes probe and stray wiring capacitance.
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of more than 0.1 μF is used between VCC and GND near device. Also, ensure that the distance
between the leads of the photocoupler and capacitor is no more than 10 mm.
3. Pin 2 (which is an NC*1 pin) can either be connected directly to the GND pin on the LED side or left open.
Unconnected pins should not be used as a bypass for signals or for any other similar purpose because this may
degrade the internal noise environment of the device.
Note: *1. NC: Non-Connection (No Connection).
4. Avoid storage at a high temperature and high humidity.
Page 7 of
10
Mar 3, 2011
A Business Partner of Renesas Electronics Corporation.
Preliminary document
Specifications in this document are tentative and subject to change.
PS9309L, PS9309L2
Chapter Title
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
2.0±0.1
+0.1
4.0±0.1
1.5
–0
4.5 MAX.
+0.1
1.5
–0
0.35
8.0±0.1
5.08±0.1
Tape Direction
PS9309L-E3
Outline and Dimensions (Reel)
2.0±0.5
2.0±0.5
13.0±0.2
R 1.0
21.0±0.8
17.5±1.0
21.5±1.0
15.9 to 19.4
Outer edge of
flange
Packing: 2 000 pcs/reel
Page 8 of
10
Mar 3, 2011
A Business Partner of Renesas Electronics Corporation.
Preliminary document
Specifications in this document are tentative and subject to change.
PS9309L, PS9309L2
Chapter Title
Outline and Dimensions (Tape)
2.0±0.1
+0.1
4.0±0.1
1.5
–0
4.5 MAX.
+0.1
2.0
–0
8.0±0.1
0.35
5.08±0.1
Tape Direction
PS9309L2-E3
Outline and Dimensions (Reel)
2.0±0.5
2.0±0.5
13.0±0.2
R 1.0
21.0±0.8
25.5±1.0
29.5±1.0
23.9 to 27.4
Outer edge of
flange
Packing: 2 000 pcs/reel
Page 9 of
10
Mar 3, 2011
A Business Partner of Renesas Electronics Corporation.
Preliminary document
Specifications in this document are tentative and subject to change.
PS9309L, PS9309L2
Chapter Title
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
Page 10 of
10
Mar 3, 2011
相关型号:
PS9309L2-V-E3
Low Input Current TOTEM POLE OUTPUT TYPE HIGH CMR, IPM DRIVER, 6-PIN SDIP PHOTOCOUPLER
CEL
PS9309L2-V-E3-AX
Low Input Current TOTEM POLE OUTPUT TYPE HIGH CMR, IPM DRIVER, 6-PIN SDIP PHOTOCOUPLER
CEL
PS9313L
1 Mbps, OPEN COLLECTOR OUTPUT TYPE, HIGH CMR, INTELLIGENT POWER MODULE DRIVE 8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER
CEL
PS9313L-AX
Logic IC Output Optocoupler, 1-Element, 5000V Isolation, 1MBps, LEAD FREE, PLASTIC, SDIP-6
NEC
PS9313L-AX
1 Mbps, OPEN COLLECTOR OUTPUT TYPE, HIGH CMR, INTELLIGENT POWER MODULE DRIVE 8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER
CEL
PS9313L-E3
1 Mbps, OPEN COLLECTOR OUTPUT TYPE, HIGH CMR, INTELLIGENT POWER MODULE DRIVE 8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER
CEL
PS9313L-E3-AX
Logic IC Output Optocoupler, 1-Element, 5000V Isolation, 1MBps, LEAD FREE, PLASTIC, SDIP-6
NEC
PS9313L-E3-AX
1 Mbps, OPEN COLLECTOR OUTPUT TYPE, HIGH CMR, INTELLIGENT POWER MODULE DRIVE 8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER
CEL
PS9313L-E3-V-AX
Logic IC Output Optocoupler, 1-Element, 5000V Isolation, 1MBps, LEAD FREE, PLASTIC, SDIP-6
NEC
PS9313L-V
1 Mbps, OPEN COLLECTOR OUTPUT TYPE, HIGH CMR, INTELLIGENT POWER MODULE DRIVE 8 mm CREEPAGE 6-PIN SDIP PHOTOCOUPLER
CEL
©2020 ICPDF网 联系我们和版权申明