NE687M33-T3-A [CEL]
NECs NPN SILICON TRANSISTOR; NEC的NPN硅晶体管型号: | NE687M33-T3-A |
厂家: | CALIFORNIA EASTERN LABS |
描述: | NECs NPN SILICON TRANSISTOR |
文件: | 总6页 (文件大小:346K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
NEC's NPN SILICON TRANSISTOR
NE687M33
FEATURES
•
LOW NOISE:
NF = 1.5 dB TYP. @ VCE = 1 V, IC = 3 mA, f = 2 GHz
•
3-PIN SUPER LEAD-LESS MINIMOLD (M33) PACKAGE
ORDERING INFORMATION
PART NUMBER
NE687M33-A
NE687M33-T3-A
QUANTITY
SUPPLYING FORM
• 8 mm wide embossed taping
• Pin 2 (Base) face the perforation side of the tape
50 pcs (Non reel)
10 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
The unit sample quantity is 50 pcs.
ABSOLUTE MAXIMUM RATINGS (TA =+25ºC)
PARAMETER
Collector to Base Voltage
Collector to Emitter Voltage
Emitter to Base Voltage
Collector Current
SYMBOL
VCBO
VCEO
VEBO
RATINGS
UNIT
V
5.0
3.0
V
2.0
30
V
IC
mA
mW
°C
°C
Note
Total Power Dissipation
Junction Temperature
Storage Temperature
Ptot
90
Tj
150
Tstg
−65 to +150
Note Mounted on 1.08 cm2 × 1.0 mm (t) glass epoxy PCB
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
California Eastern Laboratories
NE687M33
ELECTRICAL CHARACTERISTICS (TA =+25ºC)
PARAMETER
DC Characteristics
SYMBOL
TEST CONDITIONS
MIN.
TYP.
MAX.
UNIT
Collector Cut-off Current
Emitter Cut-off Current
DC Current Gain
ICBO
IEBO
VCB = 5 V, IE = 0 mA
–
–
–
–
100
100
140
nA
nA
–
VEB = 1 V, IC = 0 mA
VCE = 1 V, IC = 10 mA
Note 1
hFE
70
110
RF Characteristics
Gain Bandwidth Product
Insertion Power Gain
fT
VCE = 1 V, IC = 10 mA, f = 2 GHz
VCE = 1 V, IC = 10 mA, f = 2 GHz
10
7
12
9
–
–
GHz
dB
|S21e|2
VCE = 1 V, IC = 3 mA, f = 2 GHz,
ZS = Zopt
Noise Figure
NF
–
–
1.5
0.4
2.0
0.7
dB
pF
Note 2
Reverse Transfer Capacitance
Cre
VCB = 0.5 V, IC = 0 mA, f = 1 MHz
Notes 1. Pulse measurement: PW ≤ 350 μs, Duty Cycle ≤ 2%
2. Collector to base capacitance when the emitter grounded
hFE CLASSIFICATION
RANK
Marking
hFE Value
FB
W2
70 to 140
NE687M33
TYPICAL CHARACTERISTICS (TA =+25ºC, unless otherwise specified)
REVERSE TRANSFER CAPACITANCE
vs. COLLECTOR TO BASE VOLTAGE
TOTAL POWER DISSIPATION
vs. AMBIENT TEMPERATURE
250
200
150
0.6
Mounted on Glass Epoxy PCB
f = 1 MHz
(1.08 cm2 × 1.0 mm (t) )
0.5
0.4
0.3
0.2
0.1
100
90
50
0
25
50
75
100
125
150
0
1
2
3
4
5
Ambient Temperature TA (ºC)
Collector to Base Voltage VCB (V)
COLLECTOR CURRENT vs.
BASE TO EMITTER VOLTAGE
COLLECTOR CURRENT vs.
BASE TO EMITTER VOLTAGE
100
10
1
100
10
1
VCE = 1 V
VCE = 2 V
0.1
0.1
0.01
0.001
0.01
0.001
0.0001
0.0001
0.4
0.5
0.6
0.7
0.8
0.9
1.0
0.4
0.5
0.6
0.7
0.8
0.9
1.0
Base to Emitter Voltage VBE (V)
Base to Emitter Voltage VBE (V)
COLLECTOR CURRENT vs.
COLLECTOR TO EMITTER VOLTAGE
35
500 A
µ
400
450 A
µ
µ
A
350 A
µ
30
300
250
µ
A
A
25
20
µ
µ
µ
200
150
A
A
15
10
5
µ
µ
100
A
A
IB = 50
0
1
2
3
4
Collector to Emitter Voltage VCE (V)
Remark The graphs indicate nominal characteristics.
NE687M33
TYPICAL CHARACTERISTICS (TA =+25ºC, unless otherwise specified)
DC CURRENT GAIN vs.
COLLECTOR CURRENT
DC CURRENT GAIN vs.
COLLECTOR CURRENT
1000
100
10
1000
100
10
VCE = 1 V
VCE = 2 V
0.1
1
10
100
0.1
1
10
100
Collector Current IC (mA)
Collector Current IC (mA)
Remark The graphs indicate nominal characteristics.
NE687M33
PACKAGE DIMENSIONS
3-PIN SUPER LEAD-LESS MINIMOLD (M33) (UNIT: mm)
0.64±0.05
(Bottom View)
0.44±0.05
2
1
3
0.15
NE package code: M33
SOT number: -
PIN CONNECTIONS
1. Emitter
2. Base
3. Collector
Life Support Applications
These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably
be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and
agree to fully indemnify CEL for all damages resulting from such improper use or sale.
06/22/2004
A Business Partner of NEC Compound Semiconductor Devices, Ltd.
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
-AZ
Lead (Pb)
Mercury
< 1000 PPM
< 1000 PPM
< 100 PPM
< 1000 PPM
< 1000 PPM
< 1000 PPM
Not Detected
(*)
Not Detected
Cadmium
Hexavalent Chromium
PBB
Not Detected
Not Detected
Not Detected
Not Detected
PBDE
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.
相关型号:
NE687M33-T3FB
RF Small Signal Bipolar Transistor, 0.03A I(C), 1-Element, L Band, Silicon, NPN, SUPER MINIMOLD PACKAGE-3
NEC
NE687M33-T3FB-A
RF Small Signal Bipolar Transistor, 0.03A I(C), 1-Element, L Band, Silicon, NPN, SUPER MINIMOLD PACKAGE-3
NEC
NE68818
RF Small Signal Bipolar Transistor, 0.1A I(C), 1-Element, S Band, Silicon, NPN, PLASTIC, 18, 4 PIN
NEC
©2020 ICPDF网 联系我们和版权申明