CM1436-08DF [CALMIRCO]
4 and 8 Channel EMI Filter Arrays with ESD Protection; 4和8通道EMI滤波器阵列ESD保护
| 型号： | CM1436-08DF |
| 厂家： | 
CALIFORNIA MICRO DEVICES CORP |
| 描述： | 4 and 8 Channel EMI Filter Arrays with ESD Protection |
| 文件： | 总13页 (文件大小：1648K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
CM1436
4 and 8 Channel EMI Filter Arrays with ESD Protection
Product Description
Features
•
•
•
Four, six and eight channels of EMI filtering with
ESD protection
Greater than 30dB of attenuation from 800MHz to
3GHz
15kV ESD protection (IEC 61000-4-2, contact
discharge)
California Micro Devices's CM1436 is an EMI filter
array with ESD protection, which integrates either four,
six or eight pi filters (C-R-C). Each CM1436 filter has
component values of 15pF-200Ω-15pF. These parts
include ESD protection diodes on every pin, providing
a very high level of protection for sensitive electronic
components that may be subjected to electrostatic dis-
charge (ESD). The ESD diodes connected to the filter
ports safely dissipate ESD strikes of 15kV contact dis-
charge, twice the specification requirement of the IEC
61000-4-2, Level 4 international standard. Using the
MIL-STD-883 (Method 3015) specification for Human
Body Model (HBM) ESD, the pins are protected for
contact discharges at greater than 30kV.
•
•
30kV ESD protection (HBM)
Fabricated with Centurion™ advanced low
capacitance zener process technology
Space saving, low-profile 8-, 12- and 16-lead
0.4mm pitch TDFN packages
Lead-free version available
•
•
Applications
This device is particularly well-suited for portable elec-
tronics (e.g. mobile handsets, PDAs, notebook com-
puters) because of its small package and easy-to-use
pin assignments. In particular, the CM1436 is ideal for
EMI filtering and protecting data lines from ESD in
wireless handsets.
•
•
•
I/O port protection for mobile handsets, notebook
computers, PDAs etc.
EMI filtering for data ports in cell phones, PDAs or
notebook computers.
EMI filtering for LCD, camera and chip-to-chip data
lines
The CM1436 is available in space-saving, low-profile,
8-lead, 12-lead and 16-lead 0.4mm pitch TDFN pack-
ages. It is fabricated with California Micro Devices'
Centurion™ process and available with optional lead-
free finishing.
Electrical Schematic
200
Ω
FILTERn*
FILTERn*
15pF
15pF
GND
1 of 4/6/8 EMI Filtering + ESD Channels
* See Package/Pinout Diagram for expanded pin information.
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
1
CM1436
PACKAGE / PINOUT DIAGRAMS
BOTTOM VIEW
TOP VIEW
TOP VIEW
BOTTOM VIEW
(Pins Down View)
8
(Pins Up View)
(Pins Down View)
12 11 10 7
(Pins Up View)
1 2 3 4 5 6
7
6
5
1
2
3
4
9
8
GND
PAD
GND
PAD
XXXX
XX
Pin 1
Marking
Pin 1
Marking
8
7
6
5
12 11 10 9 8 7
1
2
3
4
1
2
3
4
5
6
CM1436-04DF/DE
8 Lead TDFN Package
CM1436-06DF/DE
12 Lead TDFN Package
TOP VIEW
BOTTOM VIEW
(Pins Down View)
(Pins Up View)
16 15 14 13 12 11 10
9
1 2 3 4 5 6 7 8
GND
PAD
XXXXX
Pin 1
Marking
Notes:
1
2
3
4
5
6
7
8
16 15 14 13 12 11 10 9
1) This drawing is not to scale.
2) See Ordering Information section
below for device specific marking.
CM1436-08DF/DE
16 Lead TDFN Package
PIN DESCRIPTIONS
Pins
Pins
1436-
04Dx
1436-
06Dx
1436-
08Dx
1436-
04Dx
1436-
06Dx
1436-
08Dx
NAME
DESCRIPTION
Filter Channel 1
Filter Channel 2
Filter Channel 3
Filter Channel 4
Filter Channel 5
Filter Channel 6
Filter Channel 7
Filter Channel 8
Device Ground
NAME
DESCRIPTION
Filter Channel 1
Filter Channel 2
Filter Channel 3
Filter Channel 4
Filter Channel 5
Filter Channel 6
Filter Channel 7
Filter Channel 8
1
2
3
4
1
2
3
4
5
6
1
2
3
4
5
6
7
8
FILTER1
FILTER2
FILTER3
FILTER4
FILTER5
FILTER6
FILTER7
FILTER8
GND
8
7
6
5
12
11
10
9
16
15
14
13
12
11
10
9
FILTER1
FILTER2
FILTER3
FILTER4
FILTER5
FILTER6
FILTER7
FILTER8
8
7
GND Pad
Ordering Information
PART NUMBERING INFORMATION
Standard Finish
Lead-free Finish
Leads/Pins
Package
TDFN-08
TDFN-12
TDFN-16
Ordering Part Number1 Part Marking Ordering Part Number1 Part Marking
8
CM1436-04DF
CM1436-06DF
CM1436-08DF
6F
CM1436-04DE
CM1436-06DE
CM1436-08DE
6E
12
16
N36F
N368F
N36E
N368E
Note 1: Parts are shipped in Tape & Reel form unless otherwise specified.
© 2006 California Micro Devices Corp. All rights reserved.
2
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com 02/06/06
CM1436
Specifications
ABSOLUTE MAXIMUM RATINGS
PARAMETER
RATING
-65 to +150
100
UNITS
°C
Storage Temperature Range
DC Power per Resistor
Package DC Power Rating
mW
mW
300
STANDARD OPERATING CONDITIONS
PARAMETER
RATING
UNITS
Operating Temperature Range
-40 to +85
°C
ELECTRICAL OPERATING CHARACTERISTICS (SEE NOTE 1)
SYMBOL PARAMETER
CONDITIONS
MIN
160
12
TYP
200
15
MAX
UNITS
R
C
Resistance
240
18
Ω
pF
V
Capacitance
At 2.5V DC, 1MHz, 30mV AC
VDIODE
Diode Standoff Voltage
IDIODE = 10μA
6.0
ILEAK
Diode Leakage Current (reverse
bias)
VDIODE = 3.3V
0.1
1
μA
VSIG
Signal Voltage
Positive Clamp
Negative Clamp
I
LOAD = 10mA
5.6
-0.4
6.8
-0.8
9.0
-1.5
V
V
ILOAD = -10mA
VESD
In-system ESD Withstand Voltage
a) Human Body Model, MIL-STD-
883, Method 3015
Notes 2 and 3
30
15
kV
kV
b) Contact Discharge per IEC
61000-4-2 Level 4
Cut-off Frequency
R = 200Ω, C = 15pF;
Note 3
fC
ZSOURCE=50Ω, ZLOAD=50Ω
100
35
MHz
dB
Absolute Attenuation @ 1GHz from ZSOURCE = 50Ω, Z LOAD = 50Ω,
0dB Level
A1GHz
DC Bias = 0V; Notes 1, 4 and 5
Absolute Attenuation @ 800MHz to ZSOURCE = 50Ω, Z LOAD = 50Ω,
30
dB
A800MHz -
6GHz from 0dB Level
DC Bias = 0V; Notes 1, 4 and 5
6GHz
Note 1: TA=25°C unless otherwise specified.
Note 2: ESD applied to input and output pins with respect to GND, one at a time.
Note 3: These parameters are guaranteed by design and characterization.
Note 4: Attenuation / RF curves characterized by a network analyzer using microprobes.
Note 5: These parameters are NOT guaranteed by design, characterization and production.
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
3
CM1436
Performance Information
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 1. Channel 1 EMI Filter Performance (CM1436-04 only)
Figure 2. Channel 2 EMI Filter Performance (CM1436-04 only)
© 2006 California Micro Devices Corp. All rights reserved.
4
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com 02/06/06
CM1436
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 3. Channel 3 EMI Filter Performance (CM1436-04 only)
Figure 4. Channel 4 EMI Filter Performance (CM1436-04 only)
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
5
CM1436
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 5. Channel 1 EMI Filter Performance (CM1436-06/08 only)
Figure 6. Channel 2 EMI Filter Performance (CM1436-06/08 only)
© 2006 California Micro Devices Corp. All rights reserved.
6
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com 02/06/06
CM1436
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 7. Channel 3 EMI Filter Performance (CM1436-06/08 only)
Figure 8. Channel 4 EMI Filter Performance (CM1436-06/08 only)
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
7
CM1436
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 9. Channel 5 EMI Filter Performance (CM1436-06/08 only)
Figure 10. Channel 6 EMI Filter Performance (CM1436-06/08 only)
© 2006 California Micro Devices Corp. All rights reserved.
8
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com 02/06/06
CM1436
Performance Information (cont’d)
Typical Filter Performance (nominal conditions unless specified otherwise, 0V DC Bias, 50 Ohm Environment)
Figure 11. Channel 7 EMI Filter Performance (CM1436-08 only)
Figure 12. Channel 8 EMI Filter Performance (CM1436-08 only)
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
9
CM1436
Performance Information (cont’d)
Figure 13. Filter Capacitance vs. Input Voltage over Temperature
(normalized to capacitance at 2.5VDC and 25°C)
© 2006 California Micro Devices Corp. All rights reserved.
10
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com 02/06/06
CM1436
Mechanical Details
CM1436-04DF/DE Mechanical Specifications
Mechanical Package Diagrams
Dimensions for the CM1436-04DF/DE supplied in a 8-
lead, 0.4mm pitch TDFN package are presented
below.
D
For complete information on the TDFN-8, see the Cali-
fornia Micro Devices TDFN Package Information docu-
ment.
8 7 6 5
Pin 1
Marking
PACKAGE DIMENSIONS
Package
TDFN
1 2 3 4
TOP VIEW
✝
JEDEC
No.
MO-229C
Leads
8
Millimeters
Nom
Inches
Nom
0.10
C
Dim.
Min
0.70
0.00
Max
Min
Max
A
A1
A3
b
0.75
0.80 0.028 0.030 0.031
0.05 0.000 0.001 0.002
0.008 REF
0.08
C
0.02
A1
A3
SIDE VIEW
0.20 REF
0.20
A
b
0.15
1.65
1.10
1.30
0.30
0.25 0.006 0.008 0.010
1.75 0.065 0.067 0.069
1.30 0.043 0.047 0.051
1.40 0.051 0.053 0.055
0.50 0.012 0.016 0.020
0.016 BSC
D
1.70
8X
M
0.10
C A B
D2
E
1.20
e
1.35
E2
Pin 1
E2
e
0.40
1
2
3
4
Locator
0.40 BSC
GND
PAD
C0.2
7
K
0.20
0.15
0.008
8
6
5
L
0.25
0.35 0.006 0.010 0.014
3000 pieces
K
D2
# per
tape and
reel
L
BOTTOM VIEW
Controlling dimension: millimeters
✝
Dimensions for 8-Lead, 0.4mm pitch
TDFN package
This package is compliant with JEDEC standard MO-229C with the
exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as
called out in the table above.
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
11
CM1436
Mechanical Details (cont’d)
CM1436-06DF/DE Mechanical Specifications
Mechanical Package Diagrams
Dimensions for the CM1436-06DF/DE suplied in a 12-
lead, 0.4mm pitch TDFN package are presented
below.
D
For complete information on the TDFN-12, see the Cal-
ifornia Micro Devices TDFN Package Information doc-
ument.
12 11 10 9 8 7
Pin 1
Marking
PACKAGE DIMENSIONS
Package
TDFN
1 2 3 4 5 6
TOP VIEW
✝
JEDEC
No.
MO-229C
Leads
12
Millimeters
Nom
Inches
Nom
0.10
C
Dim.
Min
0.70
0.00
Max
Min
Max
A
A1
A3
b
0.75
0.80 0.028 0.030 0.031
0.05 0.000 0.001 0.002
0.008 REF
0.08
C
0.02
A1
A3
SIDE VIEW
0.20 REF
0.20
A
b
0.15
2.45
1.90
1.30
0.25
0.25 0.006 0.008 0.010
2.55 0.096 0.098 0.100
2.10 0.075 0.079 0.083
1.40 0.051 0.053 0.055
0.45 0.010 0.014 0.018
0.016 BSC
D
2.50
8X
M
0.10
C A B
e
D2
E
2.00
E2
1.35
Pin 1
1
2
3
4
5
6
7
Locator
E2
e
0.35
C0.1
GND PAD
0.40 BSC
12 11 10
9
8
K
0.20
0.15
0.008
K
L
0.25
0.35 0.006 0.010 0.014
3000 pieces
D2
L
# per
tape and
reel
BOTTOM VIEW
Controlling dimension: millimeters
✝
Dimensions for 12-Lead, 0.4mm pitch
TDFN package
This package is compliant with JEDEC standard MO-229C with the
exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as
called out in the table above.
© 2006 California Micro Devices Corp. All rights reserved.
12
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com 02/06/06
CM1436
Mechanical Details (cont’d)
CM1436-08DF/DE Mechanical Specifications
Mechanical Package Diagrams
The CM1436-08DF/DE is supplied in a 16-lead, 0.4mm
pitch TDFN package. Dimensions are presented
below.
D
For complete information on the TDFN-16, see the Cal-
ifornia Micro Devices TDFN Package Information doc-
ument.
16 15 14 13 12
11 10 9
Pin 1
Marking
PACKAGE DIMENSIONS
Package
TDFN
1 2 3 4 5 6 7 8
TOP VIEW
✝
JEDEC
No.
MO-229C
Leads
16
Millimeters
Nom
Inches
Nom
0.10
C
Dim.
Min
0.70
0.00
0.40
Max
Min
Max
A
A1
A3
b
0.75
0.80 0.028 0.030 0.031
0.05 0.000 0.001 0.002
0.70 0.016 0.022 0.028
0.008 REF
0.08
C
0.02
A1
A3
E2
SIDE VIEW
0.55
A
0.20 REF
3.30
D
3.25
2.80
1.30
0.35
3.35 0.128 0.130 0.132
3.00 0.110 0.114 0.118
1.40 0.051 0.053 0.055
0.45 0.014 0.016 0.018
0.016 BSC
8X
M
0.10
C A B
e
b
D2
E
2.90
1.35
Pin 1
Locator
1
2
3
4
5
6
7
8
9
E2
e
0.40
C0.2
GND PAD
0.40 BSC
16 15 14 13 12 11 10
D2
K
0.20
0.15
0.008
K
L
0.25
0.35 0.006 0.010 0.014
3000 pieces
L
# per
tape and
reel
BOTTOM VIEW
Controlling dimension: millimeters
✝
Dimensions for 16-Lead, 0.4mm pitch
TDFN package
This package is compliant with JEDEC standard MO-229C with the
exception of the "D", "D2", "E", "E2", "K" and "L" dimensions as
called out in the table above.
© 2006 California Micro Devices Corp. All rights reserved.
02/06/06
490 N. McCarthy Blvd., Milpitas, CA 95035-5112
●
Tel: 408.263.3214
●
Fax: 408.263.7846
●
www.cmd.com
13
相关型号：
©2020 ICPDF网 联系我们和版权申明