HBD060ZGE-ANT7 [BEL]
DC-DC Regulated Power Supply Module, 2 Output, 60W, Hybrid;
| 型号： | HBD060ZGE-ANT7 |
| 厂家： | 
BEL FUSE INC. |
| 描述： | DC-DC Regulated Power Supply Module, 2 Output, 60W, Hybrid 输出元件 |
| 文件： | 总3页 (文件大小：84K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HBD DC-DC Series Data Sheet
30 to 60-Watt, Dual Output
Features
• Independent dual outputs
• Flexible load sharing
• High efficiency topology
• Open-frame design
• Planar magnetics
• Independent trim for each output
• 1500V Isolation
• 100°C baseplate operation
Description
HBD dual output, dc-dc converters feature high efficiency, 1500 VDC isolation, and open-frame packaging. The HBD
family allows board designers to deliver any combination of power from either output, up to each model’s maximum
rating. The HBD is available in 5V/3.3V or 3.3V/2.5V combinations in either a 24V or 48V input version. The HBD uses
planar magnetics and has an MTBF of over a million hours.
Efficiency vs. Load (24V Input)
85
Technical Specifications
80
Input
Voltage Range
24 VDC Nominal
48 VDC Nominal
75
18.00 - 36.00 VDC
34.00 - 75.00 VDC
HBD060YGE-A
Reflected Ripple
Input Reverse Voltage Protection
80 mA
Shunt Diode
70
65
60
EFF. (18V)
EFF. (24V)
EFF. (36V)
10
20
30
40
50
60
70
80
90
100
Output
LOAD %
Setpoint Accuracy
±1%
Efficiency vs. Load (48V Input)
Line Regulation V Min. - V Max., I
Rated, Output 1
Rated, Output 2
0.2% V
1.0% V
0.5% V
in
in
out
out
out
Line Regulation V Min. - V Max., I
in
in
out
85
Load Regulation I
Min. - I
Max., V Nom., Output 1
out
out
out
in
in
out
out
Load Regulation I
Min. - I
Max., V Nom., Output2
1.0% V
80
75
70
65
60
55
50
out
Minimum Output Current
10% I
Rated
25% I
4% V
out
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
out
out
500 µs
±10%
HBD060ZGE-A
HBD040ZGE-A
HBD0X0ZED-A
Voltage Trim Range (5V/3.3V Units)
Power Limit Threshold Range, % of I
OVP Trip Range (Main Ouput)
Rated
110 - 140%
115 - 140% V Nom.
out
out
10
20
30
40
50
60
70
80
90
100
LOAD %
General
Notes
Turn-On Time
10 ms
Positive Logic
500 kHz
Remote Shutdown
Switching Frequency
Isolation
1
†
For negative logic, add suffix “N” to model number.
MTBF predictions may vary slightly from model to model.
Input - Output
1500 VDC
1050 VDC
500 VDC
0.03%/°C
Input - Case
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Output - Case
Temperature Coefficient
Case Temperature
Operating Range
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
-40 To +100°C
-40 To +125°C
105 To 115°C
95%
Storage Range
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
Safety: Agency approvals may vary from model to model. Please consult
factory for specific model information.
5 g
6
†
MTBF (Bellcore TR-NWT-000332)
1.3 x 10 Hrs
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
Safety
Weight (approx.)
UL, cUL, VDE
2.4 oz
REV. JAN 26, 2005
Page 1 of 3
www.power-one.com
HBD DC-DC Series Data Sheet
30 to 60-Watt, Dual Output
Model Selection
INPUT VOLTAGE
INPUT VOLTAGE
RANGE (VOLTS)
MAXIMUM INPUT
CURRENT (AMPS)*
OUTPUT
VOLTAGE (VOLTS)
RATED OUTPUT
CURRENT (AMPS)&&
RIPPLE & NOISE
pk-pk (mV)
TYPICAL
EFFICIENCY**
MODEL
(VOLTS)
HBD040YED-A
HBD060YGE-A
HBD040YGE-A
HBD030ZED-A
HBD040ZGE-A
HBD040ZED-A
HBD060ZGE-A
24
24
24
48
48
48
48
18-36
18-36
18-36
34-75
34-75
34-75
34-75
2.89
4.54
3.02
1.50
1.51
1.62
2.27
3.3/2.5
5.0/3.3
5.0/3.3
3.3/2.5
5.0/3.3
3.3/2.5
5.0/3.3
12/15
12/15
8/12
9/12***
8/12
75/75
100/75
100/75
75/75
100/75
75/75
75%
78%
80%
75%
80%
75%
75%
12/15
12/15
75/75
NOTES:
*
Maximum input current at minimum input voltage, maximum rated output power.
** At nominal V , rated output.
in
*** Total output power to be restricted to 30 Watts.
&& Current can be drawn from either output to its maximum value, or from both outputs to a combined total of 15A.
Mechanical Drawing
0.18"
(4.6mm)
2.28
"
(57.9mm)
MOUNTING INSERTS
M3X.5 THROUGH 4PL
1.700"(43.2mm)
1.500"(38.1mm)
1.200"(30.5mm)
0.900"(22.9mm)
5
6
7
1.400"(35.6mm)
1
2
DIA 0.040"
(1.0mm)
1.000"(25.4mm)
BOTTOM VIEW
(PIN SIDE)
2.40
"
(61.0mm)
0.500"(12.7mm)
0.200"(5.1mm)
-0.100"(-2.5mm)
8
9
0.400"(10.2mm)
0
3
4
10
-0.300"(-7.6mm)
-0.50"(-12.7mm)
.025" REF.
(0.6mm)
0
1.900"
(48.3mm)
-0.19"
(-4.8mm)
0.50"
(12.7mm)
SIDE VIEW
Pin
Function
-V
1
in
Tolerances
(Millimeters)
2
3
Case
On/Off
Thermal Impedance
Natural Convection
100 LFM
200 LFM
300 LFM
400 LFM
Inches:
.XX ± 0.020
.XXX ± 0.010
6.6 °C/W
5.7 °C/W
4.2 °C/W
3.1 °C/W
2.6 °C/W
4
+V
in
.X ± 0.5
.XX ± 0.25
5
6
+V
out 2
- V
out 2
Pin:
± 0.002
7
8
Trim 2
+V
± 0.05
out 1
Note:
9
-V
Thermal impedance data is dependent on
many environmental factors. The exact
thermal performance should be validated
for specific application.
(Dimensions as listed unless otherwise
specified.)
out 1
10
Trim 1
REV. JAN 26, 2005
Page 2 of 3
www.power-one.com
OPTIONS
Ordering Information
Suffix Code Identification:
Series Applicability:
HAS, HBD, HBS, HES, QBS, QES, TES, TQD
Features & Options
Descriptions
Suffix Code
Remote ON/OFF
Positive Logic
Negative Logic
None
N
Trim
Standard Power-One (Negative)
Industry-standard (Positive)
None
T
Pin Length
0.18” (4.6mm), standard model length None
0.145” (3.68mm)
0.110” (2.8mm)
7
8
Special Options
Customer-specific models
S#
NOTE: Contact factory for availability of specific options.
NUCLEAR AND MEDICAL APPLICATIONS - Power-One products are not designed, intended for use in, or authorized for use as critical compo-
nents in life support systems, equipment used in hazardous environments, or nuclear control systems without the express written consent of the
respective divisional president of Power-One, Inc.
TECHNICAL REVISIONS - The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
REV. JAN 26, 2005
Page 3 of 3
www.power-one.com
相关型号：
©2020 ICPDF网 联系我们和版权申明