HBD060ZGE-ANT81V [BEL]
DC-DC Regulated Power Supply Module, 2 Output, 60W, Hybrid;型号: | HBD060ZGE-ANT81V |
厂家: | BEL FUSE INC. |
描述: | DC-DC Regulated Power Supply Module, 2 Output, 60W, Hybrid |
文件: | 总3页 (文件大小:94K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ꢀꢀ
ꢀꢀ
(888) IPD-CONVerters
(888) 473-2668
www.ipdconverters.com
HBD SERIES - DUAL OUTPUT, 60 WATT
FEATURES
DESCRIPTION
HBD dual output, DC/DC converters feature high
efficiency, 1500 VDC isolation, and open-frame
packaging. The HBD family allows board designers
to deliver any combination of power from
either output, up to each model’s maximum rating.
The HBD is available in 5V/3.3V or 3.3V/2.5V
combinations in either a 24V or 48V input version. The
HBD uses planar magnetics and has an MTBF of over a
million hours.
• Independent Dual Outputs • Independent Trim
• Flexible Load Sharing
For Each Output
• High Efficiency Topology • 1500V Isolation
• Open-Frame Design
• Planar Magnetics
• 100°C Baseplate
Operation
Efficiency vs. Load (24V Input)
85
80
75
70
65
60
HBD060YGE-A
EFF. (18V)
EFF. (24V)
EFF. (36V)
TECHNICAL SPECIFICATIONS
Input
Voltage Range
10
20
30
40
50
60
70
80
90
100
24 VDC Nominal
48 VDC Nominal
Reflected Ripple
18.00 - 36.00 VDC
34.00 - 75.00 VDC
80 mA
LOAD %
Input Reverse Voltage Protection
Shunt Diode
Efficiency vs. Load (48V Input)
Output
85
Setpoint Accuracy
±1%
0.2% Vout
1.0% Vout
0.5% Vout
1.0% Vout
80
75
70
65
60
55
50
Line Regulation Vin Min. - Vin Max., Iout Rated, Output 1
Line Regulation Vin Min. - Vin Max., Iout Rated, Output 2
Load Regulation Iout Min. - Iout Max., Vin Nom., Output 1
Load Regulation Iout Min. - Iout Max., Vin Nom., Output2
Minimum Output Current
10% Iout Rated
HBD060ZGE-A
HBD040ZGE-A
HBD040ZED-A
Dynamic Regulation, Loadstep
Pk Deviation
25% Iout
4% Vout
500 µs
Settling Time
Voltage Trim Range (5V/3.3V Units)
Power Limit Threshold Range, % of Iout Rated
OVP Trip Range (Main Ouput)
±10%
110 - 140%
115 - 140% Vout Nom.
10
20
30
40
50
60
70
80
90
100
LOAD %
General
Turn-On Time
10 ms
Positive Logic
500 kHz
Notes
For negative logic, add suffix “N” to model number.
Remote Shutdown
Switching Frequency
Isolation
Input - Output
Input - Case
1
†
1500 VDC
1050 VDC
500 VDC
0.03%/°C
MTBF predictions may vary slightly from model to model.
Output - Case
Specifications typically at 25°C, normal line, and full load, unless otherwise
stated.
Temperature Coefficient
Case Temperature
Operating Range
-40 To +100°C
-40 To +125°C
105 To 115°C
95%
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Storage Range
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
5 g
MTBF (Bellcore TR-NWT-000332)
1.3 x 106 Hrs
UL, CUL, VDE
2.4 oz
†
Units are water-washable and fully compatible with commercial spray or
immersion post wave-solder washing equipment.
Safety
Weight (approx.)
1
HBD SERIES - DUAL OUTPUT, 60 WATT
MODELS - (See the last page of this file for options.)
Vin
(Volts)
Vin Range
(Volts)
Iin Max.*
(Amps)
Vout
(Volts)
Iout Rated
(Amps)
Ripple & Noise
Pk-Pk (mV)
Efficiency
Typ. **
Model
24
24
24
48
48
48
18 - 36
18 - 36
18 - 36
34 - 75
34 - 75
34 - 75
2.89
4.54
3.02
1.51
1.62
2.27
3.3/2.5
5.0/3.3
5.0/3.3
5.0/3.3
3.3/2.5
5.0/3.3
12/15
12/15
8/12
8/12
12/15
12/15
75/75
100/75
100/75
100/75
75/75
75%
78%
80%
80%
75%
79%
HBD040YED-A
HBD060YGE-A
HBD040YGE-A
HBD040ZGE-A
HBD040ZED-A
HBD060ZGE-A
100/75
Denotes advanced product release. Consult factory for product availability.
* Maximum input current at minimum input voltage, maximum rated output power.
** At nominal Vin, rated output.
Note: Current can be drawn from either output to its maximum value, or from both outputs to a combined total of 15A.
MECHANICAL DRAWING
Pin
Function
Tolerances
(Millim
Thermal Impedance
1
2
3
-Vin
Case
On/Off
Inches:
eters)
Natural Convection
6.6 °C/W
5.7 °C/W
4.2 °C/W
3.1 °C/W
2.6 °C/W
.XX ± 0.020
.XXX ± 0.010
.X ± 0.5
.XX ± 0.25
100 LFM
200 LFM
300 LFM
400 LFM
4
5
+Vin
+Vout 2
Pin:
± 0.002
6
7
8
- Vout 2
Trim 2
+Vout 1
± 0.05
Note:
Thermal impedance data is dependent on
many environmental factors. The exact
thermal performance should be validated for
specific application.
(Dimensions as listed unless otherwise
specified.)
9
-Vout
1
10
Trim 1
2
OPTIONS
When ordering equipment options, use the following suffix information. Select the option(s) that
you prefer and add them to the model number. Example ordering options are located below the
options table.
OPTION
Negative Logic
SUFFIX
APPLICABLE SERIES
REMARKS
N
HAS, HBD, HBS, HES, LES, QBS,
QES, TES, TQD
TTL “Low” Turns Module ON
TTL “High” Turns Module OFF
Lucent Compatible Trim
Terminal Strip
Trim
T
TS
1
HAS, HBD, HBS, HES, QBS, QES
XWS, XWD, XWT
IAS, LES
Enable
2
IAD, IAS, LES, SMS
IAS, LES
Trim and Enable
Current Share
Headerless
3
4
SMS
Y
Encapsulated EWS, IWS, OWS
PIN LENGTH AND HEATSINK
OPTIONS
Standard Pin Length is 0.180”
(4.6mm)
0.110” (2.8mm) Pin Length
0.150” (3.8mm) Pin Length
0.24” (6.1mm) Horizontal Heatsink
8
9
All Units (Except SMS)
All Units (Except SMS)
1H
All Units (Except DIP, SIP, and SM
Packages)
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
Includes Thermal Pad
0.24” (6.1mm) Vertical Heatsink
1V
2H
2V
3H
3V
All Units (Except DIP, SIP, and SM
Packages)
0.45” (11.4mm) Horizontal
Heatsink
All Units (Except DIP, SIP, and SM
Packages)
0.45” (11.4mm) Vertical Heatsink
All Units (Except DIP, SIP, and SM
Packages)
0.95” (24.1mm) Horizontal
Heatsink
All Units (Except DIP, SIP, and SM
Packages)
0.95” (24.1mm) Vertical Heatsink
All Units (Except DIP, SIP, and SM
Packages)
Example Options:HBS050ZG-ANT3V = HBS050ZG-A with negative logic, Lucent compatible trim, and
0.95” vertical heatsink.
LES015YJ-3N = LES015YJ with optional trim and enable, negative logic.
QBS066ZG-AT8 = QBS066ZG-A with Lucent compatible trim and 0.110” pin length.
NUCLEAR AND MEDICAL APPLICATIONS Power-One products are not authorized for use as critical components in life support systems,
equipment used in hazardous environments, or nuclear control systems without the express written consent of the President of Power-One, Inc.
TECHNICAL REVISIONS The appearance of products, including safety agency certifications pictured on labels, may change depending on the
date manufactured. Specifications are subject to change without notice.
3
相关型号:
©2020 ICPDF网 联系我们和版权申明