ASSR-4128-002E [AVAGO]
Form A, Solid State Relay (Photo MOSFET) (400V/0.10A/35Ohm); A型,固态继电器(Photo MOSFET ) ( 400V / 0.10A / 35Ohm )型号: | ASSR-4128-002E |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | Form A, Solid State Relay (Photo MOSFET) (400V/0.10A/35Ohm) |
文件: | 总11页 (文件大小:160K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ASSR-4118 , ASSR-4119 and ASSR-4128
Form A, Solid State Relay (Photo MOSFET)
(400V/0.10A/35)
Data Sheet
Description
Features
Compact Solid-State Bi-directional Signal Switch
The ASSR-41XX Series consists of an AlGaAs infrared
light-emitting diode (LED) input stage optically coupled
to a high-voltage output detector circuit. The detector
consists of a high-speed photovoltaic diode array and
driver circuitry to switch on/off two discrete high volt-
age MOSFETs. The relay turns on (contact closes) with a
minimum input current of 3mA through the input LED.
The relay turns off (contact opens) with an input voltage
of 0.8V or less.
Single and Dual Channel Normally-off Single-Pole-
Single-Throw (SPST) Relay
400V Output Withstand Voltage
0.1A or 0.2A Current Rating
(See Schematic for ASSR-4119 Connection A and B)
Low Input Current: CMOS Compatibility
Low On-Resistance: 8 Typical for DC-only,
25 Typical for AC/DC
The single channel configurations, ASSR-4118 and ASSR-
4119, are equivalent to 1 Form A Electromechanical Re-
lays (EMR), and the dual channel configuration, ASSR-
4128, is equivalent to 2 Form A EMR. They are available
in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface
Mount for DIP packages. ASSR-4119 enables AC/DC and
DC-only output connections. For DC-only connection,
the output current, Io, increases to 0.2A and the on-re-
sistance, R(ON) reduces to 10.
High Input-to-Output Insulation Voltage
(Safety and Regulatory Approvals Pending)
- 3750 Vrms for 1 min per UL1577
- CSA Component Acceptance
Functional Diagram
Opto-isolation
1
2
4
3
Truth Table
Applications
LED Output
Off Open
On Close
Telecommunication Switching
Data Communications
Industrial Controls
Medical
Security
Single Channel, SPST Relay,
1 Form A in 4-Pin SO Package
EMR / Reed Relay Replacement
CAUTION: It is advised that normal static precautions be taken in handling and assembly
of this component to prevent damage and/or degradation which may be induced by ESD.
Ordering Information
ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Accept-
ance Notice #5.
Option
Part number
RoHS Compliant
Package
Surface Mount Gull Wing Tape & Reel Quantity
-003E
X
100 units per tube
ASSR-4118
SO-4
-503E
-001E
-301E
-501E
-002E
-302E
-502E
X
X
X
X
1500 units per reel
50 units per tube
50 units per tube
1000 units per reel
50 units per tube
50 units per tube
1000 units per reel
X
X
X
X
ASSR-4119
ASSR-4128
300mil DIP-6
300 mil DIP-8
X
X
X
X
To order, choose a part number from the part number column and combine with the desired option from the option
column to form an order entry.
Example 1:
ASSR-4119-501E to order product of 300mil DIP-6 Gull Wing Surface Mount package in Tape and Reel packaging
and RoHS Compliant.
Example 2:
ASSR-4128-002E to order product of 300mil DIP-8 package in tube packaging and RoHS Compliant.
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.
System Schematics
ASSR-4118
Opto-isolation
Opto-isolation
1
2
4
3
1
2
4
3
Equivalent
Relay
Diagram
2
System Schematics (Continued)
ASSR-4119 Connection A
Opto-Isolation
Opto-Isolation
6
1
1
2
6
4
Equivalent
Relay
Diagram
5
2
3
Vo
4
ASSR-4119 Connection B
Opto-Isolation
Opto-Isolation
1
6
+
1
4 and 6
Vo
Equivalent
Relay
Diagram
5
2
3
-
2
5
4
ASSR-4128
Opto-isolation
Opto-isolation
1
2
3
4
8
7
6
5
8
7
1
2
Equivalent
Relay
Diagram
3
4
6
5
3
Package Outline Drawings
ASSR-4118 4-Pin Small Outline Package
LAND PATTERN RECOMMENDATION
[ 0.100 ]
2.54
[ 0.31 ]
0.80
LEAD FREE
TYPE NUMBER
DATE CODE
[ 0.047 ]
1.20
XXXX
[ 0.189 ]
4.80
[ 0.173 0.008 ]
4.40 0.20
YWW
[ 0.268 0.016 ]
6.8 0.4
[ 0.015 ]
0.375
[ 0.10 ]
2.540
[ 0.016 ]
0.41
[ 0.079 0.009 ]
2.0 0.2
[ 0.169 0.008 ]
4.3 0.2
[ 0.018 ]
0.46
[ 0.008 ]
0.20
[ 0.02 ]
0.5
[ 0.004 0.004 ]
0.102 0.102
[ 0.02 ]
0.5
DIMENSIONS IN MILLIMETERS AND [INCHES]
OPTION NUMBER 500 AND UL RECOGNITION NOT MARKED
ASSR-4119 6-Pin DIP Package
7.36 (0.290)
7.88 (0.310)
9.40 (0.370)
9.90 (0.390)
TYPE
NUMBER
6
5
4
0.20 (0.008)
0.33 (0.013)
LEAD FREE
DATE CODE
A XXXX
UL
YYWW
2
UR
RECOGNITION
5 ° TYP.
PIN
ONE
DOT
1
3
6.10 (0.240)
6.60 (0.260)
1.78 (0.070) MAX.
4.70 (0.185) MAX.
(0.020)
(0.040)
2.66 (0.105) MIN.
0.45 (0.018)
0.65 (0.025)
2.28 (0.090)
2.80 (0.110)
2.16 (0.085)
2.54 (0.100)
DIMENSIONS IN MILLIMETERS AND (INCHES).
4
ASSR-4119 6-Pin DIP Package with Gull Wing Surface Mount Option 300
9.65 0.25
(0.380 0.010)
LAND PATTERN RECOMMENDATION
6.35 0.25
(0.250 0.010)
10.9 (0.430)
2.0 (0.080)
1.27 (0.050)
9.65 0.25
(0.380 0.010)
1.78
(0.070)
MAX.
7.62 0.25
(0.300 0.010)
0.635 0.130
0.20 (0.008)
0.30 (0.013)
(0.025 0.005)
4.19
(0.165)
MAX.
0.635 0.25
(0.025 0.010)
2.54
(0.100)
2.29
(0.090)
TYP.
12 ¡ NOM.
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
ASSR-4128 8-Pin DIP Package
7.62 0.25
(0.300 0.010)
9.65 0.25
(0.380 0.010)
8
1
7
6
5
6.35 0.25
(0.250 0.010)
TYPE NUMBER
OPTION CODE*
DATE CODE
A XXXX
LEAD FREE
U R
YYWW
UL
2
3
4
RECOGNITION
1.78 (0.070) MAX.
1.19 (0.047) MAX.
+ 0.076
- 0.051
0.254
5° TYP.
+ 0.003)
- 0.002)
3.56 0.13
(0.140 0.005)
(0.010
4.70 (0.185) MAX.
0.51 (0.020) MIN.
2.92 (0.115) MIN.
DIMENSIONS IN MILLIMETERS AND (INCHES).
OPTION NUMBERS 300 AND 500 NOT MARKED.
1.080 0.320
(0.043 0.013)
0.65 (0.025) MAX.
2.54 0.25
(0.100 0.010)
5
ASSR-4128 8-Pin DIP Package with Gull Wing Surface Mount Option 300
LAND PATTERN RECOMMENDATION
9.65 0.25
(0.380 0.010)
1.016 (0.040)
6
8
1
7
5
6.350 0.25
(0.250 0.010)
10.9 (0.430)
2.0 (0.080)
3
2
4
1.27 (0.050)
9.65 0.25
1.780
(0.070)
MAX.
(0.380 0.010)
1.19
(0.047)
MAX.
7.62 0.25
(0.300 0.010)
+ 0.076
0.254
- 0.051
3.56 0.13
(0.140 0.005)
+ 0.003)
- 0.002)
(0.010
1.080 0.320
(0.043 0.013)
0.635 0.25
(0.025 0.010)
12° NOM.
0.635 0.130
(0.025 0.005)
2.54
(0.100)
BSC
DIMENSIONS IN MILLIMETERS (INCHES).
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.
Lead Free IR Profile
TIME WITHIN 5°C of ACTUAL
PEAK TEMPERATURE
t
p
20-40 SEC.
260 +0/-5°C
T p
217°C
T L
RAMP-UP
3°C/SEC. MAX.
RAMP-DOWN
6°C/SEC. MAX.
150 - 200°C
T smax
T smin
ts
tL
60 to 150 SEC.
PREHEAT
60 to 180 SEC.
25
t 25°C to PEAK
TIME (SECONDS)
NOTES:
THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX.
Tsmax = 200°C, T = 150°C
smin
Non-halide flux should be used
6
Regulatory Information
The ASSR-4118, ASSR-4119 and ASSR-4128 are approved by the following organizations:
UL
Approved under UL 1577, component recognition program up to V = 3750 V
ISO
RMS
CSA
Approved under CSA Component Acceptance Notice #5.
Insulation and Safety Related Specifications
ASSR-4119
Symbol ASSR-4118 ASSR-4128
Parameter
Units Conditions
Minimum External Air Gap
(Clearance)
L(101)
4.9
7.1
7.4
mm
Measured from input terminals to output
terminals, shortest distance through air.
Minimum External Tracking
(Creepage)
L(102)
4.9
mm
Measured from input terminals to output
terminals, shortest distance path along
body.
Minimum Internal Plastic Gap
(Internal Clearance)
0.08
0.08
mm
V
Through insulation distance conductor to
conductor, usually the straight line distance
thickness between the emitter and detector.
Tracking Resistance
(Comparative Tracking Index)
CTI
175
IIIa
175
IIIa
DIN IEC 112/VDE 0303 Part 1
Isolation Group
(DIN VDE0109)
Material Group (DIN VDE 0109)
7
Absolute Maximum Ratings
Parameter
Symbol
TS
Min.
-55
-40
Max.
125
85
Units
C
Note
Storage Temperature
Operating Temperature
Junction Temperature
Lead Soldering Cycle
TA
C
TJ
125
260
10
C
Temperature
Time
C
s
Input Current
Average
Surge
IF
25
mA
50
Transient
1000
5
Reversed Input Voltage
Input Power Dissipation
VR
PIN
PIN
PIN
PO
PO
PO
IO
V
ASSR-4118
ASSR-4119
ASSR-4128
ASSR-4118
ASSR-4119
ASSR-4128
40
mW
mW
mW
mW
mW
mW
A
40
80
Output Power Dissipation
300
300
600
0.10
0.20
Average Output Current
1
1
(TA = 25°C, TC 100°C)
ASSR-4119
IO
A
Connection B
Output Voltage (TA = 25°C)
VO
VO
-400
0
400
400
V
V
2
ASSR-4119
Connection B
Solder Reflow Temperature Profile
See Lead Free IR Profile
Recommended Operating Conditions
Parameter
Symbol
Min.
3
Max.
20
Units
mA
V
Note
Input Current (ON)
Input Voltage (OFF)
Operating Temperature
IF(ON)
VF(OFF)
TA
3
0
0.8
-40
+85
C
Package Characteristics
Unless otherwise specified, T = 25°C.
A
Parameter
Sym.
Min.
Typ.
Max.
Units
Conditions
Note
Input-Output Momentary
Withstand Voltage
VISO
3750
Vrms
RH 50%,
t = 1 min
4, 5
Input-Output Resistance
Input-Output Capacitance
RI-O
1012
0.4
V
I-O = 500 Vdc
f = 1 MHz;
I-O = 0 Vdc
f = 1 MHz;
I-O = 0 Vdc
f = 1 MHz;
I-O = 0 Vdc
ASSR-4118
CI-O
pF
4
V
ASSR-4119
CI-O
0.5
0.8
pF
pF
V
ASSR-4128
CI-O
V
8
Electrical Specifications (DC)
For operating T = +25°C
A
Parameter
Sym.
Min.
Typ.
Max.
Units
Conditions
Fig.
Note
Output Withstand
Voltage
|VO(OFF)
|
400
450
V
VF =0.8V, IO=250 A
5
Output Leakage
Current
IO(OFF)
VR
0.005
1
A
V
VF =0.8V, VO=400V
IR =10 A
Input Reverse
Breakdown Voltage
5
Input Forward
Voltage
VF
1.1
1.3
25
8
1.6
35
10
V
IF =5mA
6, 7
8, 9
Output
On-resistance
R(ON)
IF =5mA, IO=100mA,
Pulse 30ms
6
ASSR-4119
Connection B
IF =5mA, IO=200mA,
Pulse 30ms
Switching Specifications (AC)
For operating T = +25°C
A
Parameter
Sym.
TON
Min.
Typ.
0.7
Max.
5.0
Units
Conditions
Fig.
Note
Turn On Time
Turn Off Time
ms
ms
IF =5mA, IO=100mA
IF =5mA, IO=100mA
TOFF
0.04
5.0
Notes:
1. For derating, refer to Figure 1, 2, 3 and 4.
2. The voltage across the output terminals of the relay should not exceed this rated withstand voltage. Over-voltage protection circuits should
be added in some applications to protect against over-voltage transients.
3. Threshold to switch device is I 0.5mA, however, for qualified device performance over temperature range, it is recommended to operate at
F
I =5mA.
F
4. Device is considered as a two terminal device:
ASSR-4118 - pin 1, 2 shorted and pin 3, 4 shorted.
ASSR-4119 - pin 1, 2, 3 shorted and pin 4, 5, 6 shorted.
ASSR-4128 - pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted.
5. The Input-Output Momentary Withstand Voltage is a dielectric voltage rating that should not be interpreted as an input-output continuous
voltage rating. For the continuous voltage rating refer to the IEC/EN/DIN EN 60747-5-2 Insulation Characteristics Table (if applicable), your
equipment level safety specification, or Avago Technologies Application Note 1074, “Optocoupler Input-Output Endurance Voltage.”
6. During the pulsed R
measurement ( I duration 30ms), ambient (T ) and case temperature (T ) are equal.
O A C
(ON)
9
Application Information
On-Resistance and Derating Curves
Figure 1, 2, 3 and 4 specify the maximum average out-
put current allowable for a given ambient temperature.
The maximum allowable output current and power dis-
sipation are related by the expression Rss = Po(max)/
(lo(max)) from which Rss can be calculated. Staying
within the safe area assures that the steady state MOS-
FET junction temperature remains less than 125 °C.
The Output On-Resistance, R
specified in this data
(ON),
sheet, is the resistance measured across the output con-
tact when a pulse current signal (lo=100mA) is applied
to the output pins. The use of a pulsed signal (≤30ms)
implies that each junction temperature is equal to the
ambient and case temperatures. The steady-state resis-
tance, Rss, on the other hand, is the value of resistance
measured across the output contact when a DC current
signal is applied to the output pins for a duration suf-
ficient to reach thermal equilibrium. Rss includes the ef-
fects of the temperature rise in the device.
2
IF = 10mA, 4-Layer Board
IF = 10mA, 4-Layer Board
0.12
0.12
0.1
0.1
0.08
0.08
0.06
Safe
Safe
Operating
0.06
0.04
0.02
Operating
Area
Area
0.04
0.02
0
0
-40
-20
80
-40
-20
80
0
0
20
60
100
20
TA - TEMPERATURE - ˚C
60
100
40
40
TA - TEMPERATURE - ˚C
Figure 1. Maximum Output Current Rating vs Ambient Temperature
(ASSR-4118-003E)
Figure 2. Maximum Output Current Rating vs Ambient Temperature
(ASSR-4119-001E)
IF = 10mA, 4-Layer Board
IF = 10mA, 4-Layer Board
0.12
0.2
0.1
2-Channel
0.15
0.08
0.06
0.04
1-Channel
Safe
0.1
Safe
Operating
Operating
Area
Area
0.05
0.02
0
0
-40
-20
80
0
20
TA - TEMPERATURE - ˚C
60
100
-40
-20
80
0
20
A - TEMPERATURE - ˚C
60
100
40
40
T
Figure 3. Maximum Output Current Rating vs Ambient Temperature
(ASSR-4119-001E DC Connection)
Figure 4. Maximum Output Current Rating vs Ambient Temperature
(ASSR-4128-002E)
10
1.1
1.05
1
1.4
1.3
1.2
1.1
IF = 5mA
IO = 250μA
VF = 0.8V
0.95
0.9
-40
-15
10
35
60
85
-40
-15
10
35
60
85
TA - TEMPERATURE - ˚C
TA - TEMPERATURE - ˚C
Figure 5. Normalized Output Withstand Voltage vs Temperature
Figure 6. Typical Forward Voltage vs Temperature
22
30.0
25.0
20
IF = 5mA
TA = -40ºC
TA = 0ºC
18
16
14
12
10
8
20.0
15.0
TA = 25ºC
10.0
T
A = 85ºC
5.0
0.0
0.6
-40
-15
10
35
60
85
0.8
1.0
1.2
1.4
TA - TEMPERATURE - ˚C
VF - FORWARD VOLTAGE - V
Figure 7. Typical Forward Current vs Forward Voltage
0.10
Figure 8. Typical on Resistance vs Temperature
0.06
TA= 85ºC
0.02
TA = 25ºC
-0.02
-0.06
-0.10
TA= 0ºC
TA= -40ºC
-2
-1
0
1
2
OUTPUT VOLTAGEVO (V)
Figure 9. Typical Output Current vs Output Voltage
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved.
AV02-0218EN - March 19, 2012
相关型号:
ASSR-5211-301E
TRANSISTOR OUTPUT SOLID STATE RELAY, 3750V ISOLATION-MAX, 0.300 INCH, ROHS COMPLIANT, PLASTIC, SURFACE MOUNT, DIP-6
AVAGO
ASSR-5211-321E
TRANSISTOR OUTPUT SOLID STATE RELAY, 5000V ISOLATION-MAX, 0.300 INCH, ROHS COMPLIANT, SURFACE MOUNT, DIP-6
AVAGO
ASSR-5211-501E
TRANSISTOR OUTPUT SOLID STATE RELAY, 3750V ISOLATION-MAX, 0.300 INCH, ROHS COMPLIANT, PLASTIC, SURFACE MOUNT, DIP-6
AVAGO
ASSR-5211-521E
TRANSISTOR OUTPUT SOLID STATE RELAY, 5000V ISOLATION-MAX, 0.300 INCH, ROHS COMPLIANT, SURFACE MOUNT, DIP-6
AVAGO
ASSR-V621-302E
SPECIALTY OPTOELECTRONIC DEVICE, 0.300 INCH, ROHS COMPLIANT, SURFACE MOUNT, DIP-8
AVAGO
©2020 ICPDF网 联系我们和版权申明