ASSR-V621 [AVAGO]

Dual Channel Photovoltaic MOSFET Driver (6.5V/15A);
ASSR-V621
型号: ASSR-V621
厂家: AVAGO TECHNOLOGIES LIMITED    AVAGO TECHNOLOGIES LIMITED
描述:

Dual Channel Photovoltaic MOSFET Driver (6.5V/15A)

文件: 总6页 (文件大小:101K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
ASSR-V621 and ASSR-V622  
Dual Channel Photovoltaic MOSFET Driver  
(6.5V/15A)  
Data Sheet  
Lead (Pb) Free  
RoHS 6 fully  
compliant  
RoHS 6 fully compliant options available;  
-xxxE denotes a lead-free product  
Description  
Features  
The ASSR-V62X Series is specially designed to drive high Dual Channel Photovoltaic MOSFET Driver  
power MOSFETs. It consists of an AlGaAs infrared light-  
emitting diode (LED) input stage optically coupled to an  
output detector circuit. The detector consists of a high-  
Open Circuit Voltage: 7V Typical  
Short Circuit Current: 20A Typical  
speed photovoltaic diode array and driver circuitry to  
switch on/off two discrete high voltage MOSFETs exter-  
nally. The relay driver turns on (contact closes) with a min-  
imum input current of 3mA through the input LED. The  
relay driver turns off (contact opens) with an input voltage  
of 0.8V or less.  
Low Input Current: CMOS Compatibility  
Fast Switching Speed:  
0.3ms (Ton), 0.03ms (To) Typical  
High Input-to-Output Insulation Voltage  
(Safety and Regulatory Pending Approvals)  
- 3750 Vrms for 1 min per UL1577  
The dual channel configurations, ASSR-V621 and ASSR-  
V622, allow 2 independent MOSFETs to be driven. It has  
the versatility to double the photovoltaic voltage by con-  
necting the 2 channels in series or to double the short  
circuit current by connecting the 2 channels in parallel.  
They are available in 8-pin DIP and Gull Wing Surface  
Mount packages.  
- CSA Component Acceptance  
Applications  
Solid State Relay Module  
Voltage Supply for electronic circuits  
CAUTION: It is advised that normal static precautions be taken in handling and assembly  
of this component to prevent damage and/or degradation which may be induced by ESD.  
Ordering Information  
ASSR-xxxx is UL Recognized with 3750 Vrms for 1 minute per UL1577 and is approved under CSA Component Accep-  
tance Notice #5.  
Option  
Surface  
Mount  
Gull  
Wing  
Tape  
& Reel  
Part number  
RoHS Compliant  
-002E  
Package  
Quantity  
50 units per tube  
50 units per tube  
1000 units per reel  
50 units per tube  
50 units per tube  
1000 units per reel  
ASSR-V621  
-302E  
300 mil DIP-8  
X
X
X
X
-502E  
X
-002E  
ASSR-V622  
-302E  
300 mil DIP-8  
X
X
X
X
-502E  
X
To order, choose a part number from the part number column and combine with the desired option from the option  
column to form an order entry.  
Example:  
ASSR-V621-002E to order product of 300mil DIP-8 package in tube packaging and RoHS Compliant.  
Option datasheets are available. Contact your Avago sales representative or authorized distributor for information.  
Schematic  
Opto-isolation  
Opto-isolation  
1
8
1
8
2
3
7
6
2
3
7
6
4
5
4
5
ASSR-V622-002E  
ASSR-V621-002E  
2
Package Outline Drawings  
8-Pin DIP Package  
7.62 0.25  
(0.300 0.010)  
9.65 0.25  
(0.380 0.010)  
8
1
7
6
5
6.35 0.25  
(0.250 0.010)  
TYPE NUMBER  
LEAD FREE  
OPTION CODE*  
DATE CODE  
A XXXX  
YYWW  
U R  
UL  
2
3
4
RECOGNITION  
1.78 (0.070) MAX.  
1.19 (0.047) MAX.  
+ 0.076  
- 0.051  
0.254  
5° TYP.  
+ 0.003)  
- 0.002)  
3.56 0.13  
(0.140 0.005)  
(0.010  
4.70 (0.185) MAX.  
0.51 (0.020) MIN.  
2.92 (0.115) MIN.  
DIMENSIONS IN MILLIMETERS AND (INCHES).  
OPTION NUMBERS 300 AND 500 NOT MARKED.  
1.080 0.320  
(0.043 0.013)  
0.65 (0.025) MAX.  
2.54 0.25  
(0.100 0.010)  
8-Pin DIP Package with Gull Wing Surface Mount Option 300  
LAND PATTERN RECOMMENDATION  
9.65 0.25  
(0.380 0.010)  
1.016 (0.040)  
6
8
1
7
5
6.350 0.25  
(0.250 0.010)  
10.9 (0.430)  
3
2
4
2.0 (0.080)  
1.27 (0.050)  
9.65 0.25  
1.780  
(0.070)  
MAX.  
(0.380 0.010)  
1.19  
(0.047)  
MAX.  
7.62 0.25  
(0.300 0.010)  
+ 0.076  
0.254  
- 0.051  
3.56 0.13  
(0.140 0.005)  
+ 0.003)  
- 0.002)  
(0.010  
1.080 0.320  
(0.043 0.013)  
0.635 0.25  
(0.025 0.010)  
12° NOM.  
0.635 0.130  
(0.025 0.005)  
2.54  
(0.100)  
BSC  
DIMENSIONS IN MILLIMETERS (INCHES).  
LEAD COPLANARITY = 0.10 mm (0.004 INCHES).  
NOTE: FLOATING LEAD PROTRUSION IS 0.25 mm (10 mils) MAX.  
3
Lead Free IR Profile  
TIME WITHIN 5°C of ACTUAL  
PEAK TEMPERATURE  
t
p
20-40 SEC.  
260 +0/-5°C  
Tp  
217°C  
TL  
RAMP-UP  
3°C/SEC. MAX.  
150 - 200°C  
RAMP-DOWN  
6°C/SEC. MAX.  
Tsmax  
Tsmin  
ts  
tL  
60 to 150 SEC.  
PREHEAT  
60 to 180 SEC.  
25  
t 25°C to PEAK  
TIME (SECONDS)  
NOTES:  
THE TIME FROM 25°C to PEAK TEMPERATURE = 8 MINUTES MAX.  
Tsmax = 200°C, Tsmin = 150°C  
Use of non-chlorine-activated fluxes is highly recommended.  
Note: Non-Halide flux should be used.  
Regulatory Information  
The ASSR-V621-002E and ASSR-V622-002E are approved by the following organizations:  
UL  
Approved under UL 1577, component recognition program up to V = 3750 V  
ISO  
RMS  
CSA  
Approved under CSA Component Acceptance Notice #5.  
Insulation and Safety Related Specifications  
ASSR-V621-002E  
Parameter  
Symbol  
ASSR-V622-002E  
Units  
Conditions  
Minimum External Air  
Gap (Clearance)  
L(101)  
7.1  
mm  
Measured from input terminals to output terminals,  
shortest distance through air.  
Minimum External Tracking  
(Creepage)  
L(102)  
CTI  
7.4  
mm  
mm  
Measured from input terminals to output terminals,  
shortest distance path along body.  
Minimum Internal Plastic  
Gap (Internal Clearance)  
0.08  
Through insulation distance conductor to conductor,  
usually the straight line distance thickness between  
the emitter and detector.  
Tracking Resistance  
(Comparative Tracking  
Index)  
175  
IIIa  
V
DIN IEC 112/VDE 0303 Part 1  
Isolation Group  
(DIN VDE0109)  
Material Group (DIN VDE 0109)  
4
Absolute Maximum Ratings  
Parameter  
Symbol  
TS  
Min.  
-55  
-40  
Max.  
125  
85  
Units  
°C  
Note  
Storage Temperature  
Operating Temperature  
Lead Soldering Cycle  
TA  
°C  
Temperature  
Time  
260  
10  
°C  
s
Input Current  
Average  
Surge  
IF  
30  
mA  
300  
1000  
5
Transient  
Reversed Input Voltage  
Input Power Dissipation  
VR  
V
PIN  
100  
mW  
Solder Reflow Temperature Profile  
See Lead Free IR Profile  
Recommended Operating Conditions  
Parameter  
Symbol  
IF(ON)  
VF(OFF)  
TA  
Min.  
3
Max.  
30  
Units  
mA  
V
Note  
Input Current (ON)  
Input Voltage (OFF)  
Operating Temperature  
0
0.8  
-40  
+85  
°C  
Package Characteristics  
Unless otherwise specified, operating temperature T = 25°C.  
A
Parameter  
Symbol  
Min.  
Typ.  
Max. Units Conditions  
Fig.  
Note  
Input-Output Momentary  
Withstand Voltage  
VISO  
3750  
Vrms RH ≤ 50%, t = 1 min  
1
Input-Output Resistance  
Input-Output Capacitance  
RI-O  
CI-O  
1012  
0.6  
Ω
VI-O = 500 Vdc  
f = 1 MHz; VI-O = 0 Vdc  
pF  
Electrical Specifications (DC)  
For operating T = +25°C  
A
Parameter  
Symbol  
VOC  
ISC  
Min.  
Typ.  
Max.  
Units  
Conditions  
Fig.  
Note  
Open Circuit Voltage  
Short Circuit Current  
6.5  
15  
5
7
V
IF =10mA, IO=0mA  
IF =10mA, VO=0V  
IR =10A  
20  
A  
V
Input Reverse Breakdown  
Voltage  
VR  
Input Forward Voltage  
VF  
1.1  
1.3  
1.7  
V
IF =10mA  
Switching Specifications (AC)  
For operating T = +25°C  
A
Parameter  
Symbol  
TON  
Min.  
Typ.  
0.28  
0.03  
Max.  
Units  
ms  
Conditions  
Fig.  
Note  
Turn On Time  
Turn Off Time  
IF =10mA, CL=1nF  
IF =10mA, CL=1nF  
TOFF  
ms  
Note:  
1. Device is considered as a two terminal device; pin 1, 2, 3, 4 shorted and pin 5, 6, 7, 8 shorted.  
5
70  
60  
50  
40  
30  
20  
10  
0
10  
8
IF=30mA  
IF=20mA  
IF=30mA  
IF=20mA  
IF=10mA  
6
IF=5mA  
IF=3mA  
4
IF=10mA  
IF=5mA  
2
IF=3mA  
0
0
-50  
-25  
25  
50  
75  
100  
-50  
-25  
0
25  
50  
75  
100  
TA - TEMPERATURE - °C  
TA - TEMPERATURE - °C  
Figure 2. VOC vs Temperature  
Figure 1. Short Circuit Output Current vs  
50  
40  
30  
20  
10  
0
600  
500  
400  
300  
200  
100  
0
IF=10mA  
IF=10mA  
-50  
-25  
0
25  
50  
75  
100  
-50  
-25  
0
25  
50  
75  
100  
TA - TEMPERATURE - °C  
TA - TEMPERATURE - °C  
Figure 4. TOFF vs Temperature  
Figure 3. TON vs Temperature  
For product information and a complete list of distributors, please go to our web site: www.avagotech.com  
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.  
Data subject to change. Copyright © 2005-2012 Avago Technologies. All rights reserved.  
AV02-0259EN - March 19, 2012  

相关型号:

ASSR-V621-302E

SPECIALTY OPTOELECTRONIC DEVICE, 0.300 INCH, ROHS COMPLIANT, SURFACE MOUNT, DIP-8
AVAGO

ASSR-V621-502E

SPECIALTY OPTOELECTRONIC DEVICE, 0.300 INCH, ROHS COMPLIANT, SURFACE MOUNT, DIP-8
AVAGO

ASSR-V622

Dual Channel Photovoltaic MOSFET Driver (6.5V/15A)
AVAGO

ASSR-V622-002E

SPECIALTY OPTOELECTRONIC DEVICE, 0.300 INCH, ROHS COMPLIANT, DIP-8
AVAGO

ASSR-V622-302E

SPECIALTY OPTOELECTRONIC DEVICE, 0.300 INCH, ROHS COMPLIANT, SURFACE MOUNT, DIP-8
AVAGO

ASSR-V622-502E

SPECIALTY OPTOELECTRONIC DEVICE, 0.300 INCH, ROHS COMPLIANT, SURFACE MOUNT, DIP-8
AVAGO

ASSV

3.3V LOW EMI SMD SPREAD SPECTRUM CLOCK OSCILLATOR
ABRACON

ASSV-10.000MHZ-C1.5

CMOS Output Clock Oscillator,
ABRACON

ASSV-10.000MHZ-C1.5-T

CMOS Output Clock Oscillator,
ABRACON
ABRACON

ASSV-160.000MHZ-C-C0.5-T

CMOS Output Clock Oscillator, 160MHz Nom, ROHS COMPLIANT, SMD, 4 PIN
ABRACON
ABRACON