ACMD-7617-BLK [AVAGO]
High Power Rating;型号: | ACMD-7617-BLK |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | High Power Rating |
文件: | 总14页 (文件大小:488K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
ACMD-7617
UMTS Band 1 Duplexer
Data Sheet
Description
Features
The Avago ACMD-7617 is a highly miniaturized duplexer Miniature Size
designed for use in Digital Enhanced Cordless Telecom-
munications (DECT) applications operating in UMTS
Band 1 (1920 – 1980 MHz UL, 2110 – 2170 MHz DL).
– 2.0 x 2.5 mm Max size
– 0.95 mm Max Height
– Standard 2 x 2.5 mm PCB footprint
Low Insertion Loss in the Tx channel minimizes current
drain from the power amplifier, while low Rx channel
Insertion Loss improves receiver sensitivity.
High Power Rating
– 30 dBm Abs Max Tx Power in Tx Band
Environmental
– RoHS 6 Compliant
– Halogen free
– TBBPA Free
The ACMD-7617 enhances the sensitivity and dynamic
range of handset receivers by providing high isolation of
the transmitted signal from the receiver input and high
rejection of transmit-generated noise in the receive band.
The ACMD-7617 is designed with Avago Technologies’
innovative Film Bulk Acoustic Resonator (FBAR) technol-
ogy, which makes possible ultra-small, high-Q filters at a
fraction of their usual size. The excellent power handling
capability of FBAR bulk-mode resonators supports the
high output power levels used in mobile communications
applications, while adding virtually no distortion.
Specifications
Rx Band Performance, -20 to +90° C
– Insertion Loss: 2.2 dB Max
– Rx Noise Blocking: 50 dB Min
Tx Band Performance, -20 to +90° C
– Insertion Loss: 2.5 dB Max
The ACMD-7617 also utilizes Avago Technologies’
advanced Microcap bonded-wafer, chip scale packaging
technology. This process allows the filters to be assembled
into a molded chip-on-board module with an overall size
of only 2.0 x 2.5 mm and maximum height of 0.95 mm.
The ACMD-7617 is compatible with standard 2.0 x 2.5 mm
duplexer PCB footprints.
– Tx Interferer Blocking: 55 dB Min
Applications
Digital Enhanced Cordless Telecommunications (DECT)
systems operating in the UMTS Band 1 frequency range.
Functional Block Diagram
Ant
Port 3
Rx
Port 2
Tx
Port 1
[2]
[1]
ACMD-7617 Electrical Specifications , Z = 50 , T as indicated
0
C
-20° C
+25° C
+90° C
Max
[3]
Symbol Parameter
Antenna Port to Receive Port
Units
Min
Max
Min
Typ
Max
Min
S23
Insertion Loss in Receive Band
(2110 – 2170 MHz)
Return Loss (SWR) of Receive Port in
Receive Band (2110 – 2170 MHz)
dB
dB
2.2
1.4
2.2
2.2
S22
9
(2.1)
9
20
(1.2)
(2.1)
9
(2.1)
S23
S23
Attenuation, 10 – 1920 MHz
dB
dB
30
48
30
48
38
30
48
Attenuation in Transmit Band
(1920 – 1980 MHz)
67
S23
S23
S23
Attenuation, 1980 – 2025 MHz
dB
dB
dB
35
30
35
35
30
35
50
50
55
35
30
35
Attenuation, 2255 – 2400 MHz
Attenuation in Bluetooth Band
(2400 – 2483.5 MHz)
S23
S23
Attenuation, 4030 – 4150 MHz
Attenuation, 5950 – 6130 MHz
Transmit Port to Antenna Port
dB
dB
15
15
15
15
31
20
15
15
S31
Insertion Loss in UMTS Tx Channel
dB
Center [4]
1922.4 MHz
1924.4 MHz
1926.4 – 1971.6 MHz
1973.6 MHz
1975.6 MHz
2.5
2.3
2.1
2.0
2.0
2.0
1.9
1.5
1.3
1.3
1.3
1.3
2.3
2.1
2.0
2.0
2.0
2.0
2.3
2.1
2.0
2.1
2.3
2.5
1977.6 MHz
S11
Return Loss (SWR) of Transmit Port in
Transmit Band (1920 – 1980 MHz)
dB
9
(2.1)
9
20
(1.2)
(2.1)
9
(2.1)
S31
S31
Attenuation, 10 – 1574 MHz
dB
dB
30
35
30
35
45
30
35
Attenuation in GPS Rx Band
(1574.42 – 1576.42 MHz)
38
S31
S31
S31
Attenuation, 1800 – 1900 MHz
dB
dB
dB
27
28
45
27
28
45
41
52
51
27
28
45
Attenuation, 2010 – 2025 MHz
Attenuation in Receive Band
(2110 – 2170 MHz)
S31
S31
S31
Attenuation in Bluetooth Band
(2400 – 2483.5 MHz)
Attenuation in Transmit 2nd Harmonic
Band (3840 – 3960 MHz)
Attenuation in Transmit 3rd Harmonic
Band (5760 – 5940 MHz)
dB
dB
dB
30
30
5
30
30
5
38
39
16
30
30
5
Antenna Port
S33
S33
Return Loss (SWR) of Ant Port in
Rx Band (2110 – 2170 MHz)
Return Loss (SWR) of Ant Port in
Tx Band (1920 – 1980 MHz)
dB
dB
9
9
(2.1)
(2.1)
9
9
21
(1.2)
20
(1.2)
(2.1)
(2.1)
9
9
(2.1)
(2.1)
Isolation Transmit Port to Receive Port
S21
S21
Tx-Rx Isolation in Receive Band
(2110 – 2170 MHz)
Tx-Rx Isolation in Transmit Band
(1920 – 1980 MHz)
dB
dB
50
55
50
55
61
64
50
55
Notes:
1.
T is the case temperature and is defined as the temperature of the underside of the Duplexer where it makes contact with the circuit board.
C
2. Min/Max specifications are guaranteed at the indicated temperature with the input power to the Tx port equal to or less than +29 dBm over all Tx
frequencies unless otherwise noted.
3. Typical data is the average value of the parameter over the indicated band at the specified temperature. Typical values may vary over time.
4. Integrated Insertion Loss over 3.8 MHz UMTS channel(s).
2
[1]
Absolute Maximum Ratings
Parameter
Unit
Value
Storage temperature
°C
-65 to +125
Maximum RF Input Power to Tx Port
1920–1980 MHz
dBm
+30
+25
All other frequencies
[2]
Maximum Recommended Operating Conditions
Parameter
Unit
Value
Operating temperature, Tc [3]
°C
–40 to +100
Maximum CW RF Input Power to Tx Port
1920–1980 MHz
dBm
+28
+23
All other frequencies
Notes:
1. Operation in excess of any one of these conditions may result in permanent damage to the device.
2. The device will function over the recommended range without degradation in reliability or permanent change in performance, but is not
guaranteed to meet electrical specifications.
3.
T is defined as case temperature, the temperature of the underside of the duplexer where it makes contact with the circuit board.
C
3
ACMD-7617 Typical Performance at T = 25° C
C
0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
0.0
-0.5
-1.0
-1.5
-2.0
-2.5
-3.0
1920
1930
1940
1950
1960
1970
2110
2120
2130
2140
2150
2160
2170
Frequency (MHz)
Frequency (MHz)
Figure1. Tx–Ant Insertion Loss
Figure 2. Ant–Rx Insertion Loss
0
-10
-20
-30
-40
-50
-60
-70
-80
-40
-45
-50
-55
-60
-65
-70
-75
-80
1800
1900
2000
2100
2200
2300
1800
1900
2000
2100
2200
2300
Frequency (MHz)
Frequency (MHz)
Figure 3. Tx Rejection in Rx Band and Rx Rejection in Tx Band
Figure 4. Tx–Rx Isolation
0
-5
0
-5
-10
-15
-20
-25
-10
-15
-20
-25
1800
1900
2000
2100
2200
2300
1800
1900
2000
2100
2200
2300
Frequency (MHz)
Frequency (MHz)
Figure 5. Tx and Rx Port Return Loss
Figure 6. Antenna Port Return Loss
4
ACMD-7617 Typical Performance at T = 25° C
C
0
-10
-20
-30
-40
-50
-60
-70
-80
-35
-36
-37
-38
-39
-40
-41
-42
-43
-44
-45
1000
2000
3000
4000
5000
1573
1574
1575
1576
1577
Frequency (MHz)
Frequency (MHz)
Figure 7. Tx–Ant and Ant–Rx Wideband Insertion Loss
Figure 8. Tx–Ant Rejection in GPS Band
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-30
-35
-40
-45
-50
-55
-60
-65
-70
-75
-80
-80
500
1000
Frequency (MHz)
1500
500
1000
Frequency (MHz)
1500
Figure 9. Tx–Ant Low Frequency Rejection
Figure 10. Ant–Rx Low Frequency Rejection
-35
-36
-37
-38
-39
-40
-41
-42
-43
-44
-45
-50
-52
-54
-56
-58
-60
-62
-64
-66
-68
-70
2400
2420
2440
2460
2480
2500
2400
2420
2440
2460
2480
2500
Frequency (MHz)
Frequency (MHz)
Figure 11. Tx–Ant Rejection in Bluetooth Band
Figure 12. Ant–Rx Rejection in Bluetooth Band
5
ACMD-7617 Typical Performance at T = 25° C
C
-50
-52
-54
-56
-58
-60
-62
-64
-66
-68
-70
-40
-42
-44
-46
-48
-50
-52
-54
-56
-58
-60
1980
1990
2000
Frequency (MHz)
2010
2020
2260 2280 2300 2320 2340 2360 2380 2400
Frequency (MHz)
Figure 13. Ant–Rx Rejection, 1980 –2025 MHz
Figure 14. Ant–Rx Rejection, 2255 –2400 MHz
-20
-21
-22
-23
-24
-25
-26
-27
-28
-29
-30
-25
-26
-27
-28
-29
-30
-31
-32
-33
-34
-35
4040
4060
4080
4100
4120
4140
5950
6000
6050
6100
Frequency (MHz)
Frequency (MHz)
Figure 15. Ant–Rx Rejection, 4030 –4150 MHz
Figure 16. Ant–Rx Rejection, 5950 –6130 MHz
-35
-36
-37
-38
-39
-40
-41
-42
-43
-44
-45
-15.0
-15.5
-16.0
-16.5
-17.0
-17.5
-18.0
-18.5
-19.0
-19.5
-20.0
3840
3860
3880
3900
3920
3940
3960
5800
5850
5900
5950
Frequency (MHz)
Frequency (MHz)
Figure 17. Tx–Ant Rejection at Tx Second Harmonic
Figure 18. Tx–Ant Rejection at Tx Third Harmonic
6
ACMD-7617 Typical Performance at T = 25° C
C
1
1
0.8
0.8
1.5
1.5
0.6
0.6
2
2
0.4
0.4
3
3
4
5
4
5
10
20
10
20
50
50
0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 102050
0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 102050
-50
-20
-10
-50
-20
-10
-5
-4
-5
-4
-3
-3
-0.4
-0.4
-2
-2
-0.6
-0.6
-1.5
-1.5
-0.8
-0.8
-1
-1
Figure 19. Tx Port Impedance in Tx Band
Figure 20. Rx Port Impedance in Rx Band
1
1
0.8
0.8
1.5
1.5
0.6
0.6
2
2
0.4
0.4
3
3
4
5
4
5
10
20
10
20
50
50
0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 102050
0.2 0.4 0.6 0.8 1 1.5 2 3 4 5 102050
-50
-20
-10
-50
-20
-10
-5
-4
-5
-4
-3
-3
-0.4
-0.4
-2
-2
-0.6
-0.6
-1.5
-1.5
-0.8
-0.8
-1
-1
Figure 21. Ant Port Impedance in Tx Band
Figure 22. Ant Port Impedance in Rx Band
7
ACMD-7617
2.30
2.5
MAX
0.95
MAX
1.15
(6)
ANT
(5)
(7)
GND
OPT
RX
GND
GND
TX
2.0
MAX
(8)
(GND)
(9)
(4)
GND
0.40
ORIENTATION
MARK
(3)
(2)
(1)
0.90
TOP VIEW
SIDE VIEW
BOTTOM VIEW
Notes:
Pin Connections:
1. Dimensions in millimeters
Tolerance: X.X 0.1 mm
X.XX 0.05 mm
2. Dimensions nominal unless otherwise noted
3. Angles 45° nominal
1
Rx (or Rx(+))
Gnd
Tx
2, 4, 5, 7, 9
3
6
8
Ant
Optional: Gnd, NC or Rx(–)
4. I/O Pads (3 ea)
Size: 0.40 X 0.40 mm
Spacing to ground metal: 0.30 mm
5. Contact areas are gold plated
Figure 23. Package Outline Drawing
0.90
(REF)
0.15 X 45°
0.1
0.40
I/O & PERIPHERAL GND PADS
CENTER GROUND PAD
Figure 24. Pad Detail
8
ACMD-7617
3 X 0.20
50-OHM LINE
6 X 0.25 TYP
(ADJUST FOR 50 OHMS)
Ant
3 X 0.50 X 0.50
LAND PAD
3 X 0.90 X .095, CHAMFER 0.12 X 45°
GROUND PLANE OPENING FOR LAND PAD
Rx
Tx
0.95
Notes:
1. Dimensions in mm
2. Top view
1.90
Figure 25. Suggested PCB Layout
A PCB layout using the principles illustrated in the figure High isolation is achieved by: (1) maintaining a continuous
above is recommended to optimize performance of the
ACMD-7617.
ground plane around the I/O connections and duplexer
mounting area, and (2) surrounding the I/O ports with
sufficient ground vias to enclose the connections in a
“Faraday cage.”
Note: Pin 8 grounded in this example.
The transmission line dimensions shown are designed to
achieve an impedance of 50 ohms for an 80 m thick PCB
layer with a dielectric constant of 3.4. If other PCB materials
or thicknesses are used, the 0.25 mm gap spacing may
need to be adjusted to retain a Zo of 50 ohms.
The ground vias under the ACMD-7617 mounting area
are also needed to provide adequate heat sinking for the
device.
It is important to maximize isolation between the Tx and
Rx ports.
9
ACMD-7617
2 X 0.17
141 X Ø 0.10 VIA
VIA ARRAY 1
VIA ARRAY 2
Notes:
1. Dimensions in mm
2. Top view
3. Via arrays: horiz pitch = 0.25, vert pitch = 0.25
VIA ARRAY 3
2X 0.12
Figure 26. PCB Layout, Via Detail
Note:
1. Top view
Figure 27. ACMD-7617 Superposed on PCB Layout
8 X 0.40 X 0.40
0.30 X 0.80
CHAMFER 0.12 X 45°
2.30
Notes:
1. Dimensions in mm
Notes:
1. Top view
2. Top view
3. Chamfer or radius all corners 0.05 mm min
2. Peripheral clearance of stencil aperture for center device pad is
0.05 mm. All other apertures match device pad 1:1
Figure 28. Recommended Solder Stencil
Figure 29. Solder Stencil Superposed on ACMD-7617
10
ACMD-7617
2.30
8 X 0.40 X 0.40
0.15 X 45°
> 0.30 TYP
0.90
Notes:
1. Dimensions in mm
2. Top view
Notes:
1. Top view
2. Mask apertures match device pads 1:1
Figure 30. Recommended Solder Mask
Figure 31. Solder Mask Superposed on ACMD-7617
ORIENTATION
MARK
TX
RX
S
FI
Y
= ACMD-7617
= Mfg Information
= Year
AVAGO
S3FIYWW
DDXXXX
WW = Work Week
DD = Date Code
XXXX = Assembly Lot
ANT
Figure 32. Product Marking and Pin Orientation
11
ACMD-7617
ø1.5 0.1
2.00 0.05
4.00 0.10
1.75 0.01
5.50 0.05
4.00 0.10
ø1.00 0.05
0.25 0.02
10° MAX
10° MAX
1.10 0.10
2.25 0.10
2.75 0.10
A.
K.
B.
Figure 33. SMD Tape Packing
PACKAGE ORIENTATION
SPROCKET HOLES
POCKET CAVITY
Figure 34. Unit Orientation in SMT Tape
12
ACMD-7617
FRONT VIEW
NOTES:
1. Reel shall be labeled with the following
information (as a minimum).
a. manufacturers name or symbol
b. Avago Technologies part number
c. purchase order number
d. date code
e. quantity of units
2. A certificate of compliance (c of c) shall
be issued and accompany each shipment
of product.
1.5 min.
3. Reel must not be made with or contain
ozone depleting materials.
4. All dimensions in millimeters (mm)
13.0 0.2
21.0 0.8
BACK VIEW
Shading indicates
thru slots
18.4 max.
+0.4
178
-0.2
50 min.
25
min wide (ref)
Slot for carrier tape
insertion for attachment
to reel hub (2 places 180° apart)
+2.0
12.4
-0.0
Figure 35. SMT Reel Drawing
13
ACMD-7617
Package Moisture Sensitivity
Feature
Test Method
Performance
Moisture Sensitivity Level (MSL) at 260° C
JESD22-A113D
Level 3
300
250
200
150
100
50
Tested profile shown.
0
0
50
100
150
200
250
300
PROFILE.GRF
PROFILE. WMF
6 February 2003
R. Waugh
Time, seconds
Figure 36. Verified SMT Solder Profile
Ordering Information
Part Number
No. of Devices
Container
ACMD-7617-BLK
ACMD-7617-TR1
100
Tape Strip or Anti-static Bag
178 mm (7-inch) Reel
3000
For product information and a complete list of distributors, please go to our web site: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies in the United States and other countries.
Data subject to change. Copyright © 2005-2011 Avago Technologies. All rights reserved.
AV02-2912EN - May 26, 2011
相关型号:
©2020 ICPDF网 联系我们和版权申明