5962-8957101YC [AVAGO]
2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 40Mbps, HERMETIC SEALED, CERAMIC, DIP-8;型号: | 5962-8957101YC |
厂家: | AVAGO TECHNOLOGIES LIMITED |
描述: | 2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 40Mbps, HERMETIC SEALED, CERAMIC, DIP-8 输出元件 光电 |
文件: | 总12页 (文件大小:138K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
HermeticallySealed, VeryHighSpeed,
Logic Gate Optocouplers
DataSheet
HCPL-540X,* 5962-89570, HCPL-543X, HCPL-643X, 5962-89571
*See matrix for available extensions.
Features
Description
• Dual marked with device part number and DSCC
standard microcircuit drawing
• Manufactured and tested on a MIL-PRF-38534
certified line
• QML-38534, Class H and K
• Three hermetically sealed package configurations
• Performance guaranteed over full military
temperature range: -55°C to +125°C
• High Speed: 40 M bit/s
These units are single and dual channel, hermetically
sealed optocouplers. The products are capable of
operation and storage over the full military temperature
range and can be purchased as either standard product
or with full MIL-PRF-38534 Class Level H or K testing or
from the appropriate DSCC Drawing. All devices are
manufactured and tested on a MIL-PRF-38534 certified
line and are included in the DSCC Qualified Manufac-
turers List, QML-38534 for Hybrid Microcircuits.
• High common mode rejection 500 V/µs guaranteed
• 1500 Vdc withstand test voltage
• Active (totem pole) outputs
• Three stage output available
• High radiation immunity
Truth Tables (Positive Logic)
Multichannel Devices
Input
On (H)
Off (L)
Output
L
• HCPL-2400/30 function compatibility
• Reliability data
H
• Compatible with TTL, STTL, LSTTL, and HCMOS logic
families
Single Channel DIP
Applications
Input
Enable
Output
• Military and space
• High reliability systems
• Transportation, medical, and life critical systems
• Isolation of high speed logic systems
• Computer-peripheral interfaces
• Switching power supplies
On (H)
Off (L)
On (H)
Off (L)
L
L
H
H
L
H
Z
Z
• Isolated bus driver (networking applications)-
(5400/1/K only)
• Pulse transformer replacement
• Ground loop elimination
Functional Diagram
Multiple channel devices available
• Harsh industrial environments
• High speed disk drive I/O
V
CC
V
E
• Digital isolation for A/D, D/A conversion
V
O
GND
The connection of a 0.1 µF bypass capacitor between V and GND is recommended.
CC
CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage
and/or degradation which may be induced by ESD.
Each channel contains an AlGaAs light emitting diode
which is optically coupled to an integrated high gain
photon detector. This combination results in very high
data rate capability. The detector has a threshold with
DIP through hole (case outlines P), and leadless ceramic
chip carrier (case outline 2). Devices may be purchased
with a variety of lead bend and plating options. See
Selection Guide Table for details. Standard Microcircuit
hysteresis, which typically provides 0.25 mA of differen- Drawing (SMD) parts are available for each package and
tial mode noise immunity and minimizes the potential lead style.
for output signal chatter. The detector in the single
channel units has a three state output stage which
eliminates the need for a pull-up resistor and allows for
direct drive of a data bus.
Because the same electrical die (emitters and detectors)
are used for each channel of each device listed in this
data sheet, absolute maximum ratings, recommended
operating conditions, electrical specifications, and
performance characteristics shown in the figures are
similar for all parts. Occasional exceptions exist due to
package variations and limitations and are as noted.
Additionally, the same package assembly processes and
materials are used in all devices. These similarities give
All units are compatible with TTL, STTL, LSTTL, and
HCMOS logic families. The 35 ns pulse width distortion
specification guarantees a 10 MBd signaling rate at
+125°C with 35% pulse width distortion. Figures 13
through 16 show recommended circuits for reducing
pulse width distortion and optimizing the signal rate of justification for the use of data obtained from one part
the product. Package styles for these parts are 8 pin
to represent other part’s performance for die related
reliability and certain limited radiation test results.
SelectionGuide–PackageStylesandLeadConfigurationOptions
Package
8 Pin DIP
Through Hole
1
8 Pin DIP
Through Hole
2
20 Pad LCCC
Surface Mount
2
Lead Style
Channels
Common Channel Wiring
Avago Part # & Options
Commercial
None
V , GND
None
CC
HCPL-5400
HCPL-5401
HCPL-540K
Gold Plate
Option 200
Option 100
Option 300
HCPL-5430
HCPL-5431
HCPL-543K
Gold Plate
Option 200
Option 100
Option 300
HCPL-6430
HCPL-6431
HCPL-643K
Solder Pads*
MIL-PRF-38534, Class H
MIL-PRF-38534, Class K
Standard Lead Finish
Solder Dipped*
Butt Cut/Gold Plate
Gull Wing/Soldered*
Class H SMD Part #
Prescript for all below
Either Gold or Solder
Gold Plate
5962-
5962-
5962-
8957001PX
8957001PC
8957001PA
8957001YC
8957001YA
8957001XA
8957101PX
8957101PC
8957101PA
8957101YC
8957101YA
8957101XA
89571022X
Solder Dipped*
89571022A
Butt Cut/Gold Plate
Butt Cut/Soldered*
Gull Wing/Soldered*
Class K SMD Part #
Prescript for all below
Either Gold of Solder
Gold Plate
5962-
5962-
5962-
8957002KPX
8957002KPC
8957002KPA
8957002KYC
8957002KYA
8957002KXA
8957103KPX
8957103KPC
8957103KPA
8957103KYC
8957103KYA
8957103KXA
8957104K2X
Solder Dipped*
8957104K2A
Butt Cut/Gold Plate
Butt Cut/Soldered*
Gull Wing/Soldered*
*Solder contains lead.
2
Functional Diagrams
8 Pin DIP
8 Pin DIP
20 Pad LCCC
Surface Mount
2 Channels
Through Hole
1 Channel
Through Hole
2 Channels
15
V
CC2
V
8
7
6
5
V
8
7
6
5
1
2
3
4
1
2
3
4
CC
CC
19
20
13
12
V
O2
GND
V
O1
V
E
2
V
O2
V
CC1
2
3
10
V
V
O1
O
GND
GND
GND
1
7
8
Note: All DIP devices have common VCC and ground. LCCC (leadless ceramic chip carrier) package has isolated channels with separate VCC and
ground connections.
Outline Drawings
20 Terminal LCCC Surface Mount, 2 Channels
8.70 (0.342)
9.10 (0.358)
4.95 (0.195)
5.21 (0.205)
1.78 (0.070)
1.02 (0.040) (3 PLCS)
2.03 (0.080)
1.14 (0.045)
1.40 (0.055)
8.70 (0.342)
9.10 (0.358)
4.95 (0.195)
5.21 (0.205)
TERMINAL 1 IDENTIFIER
2.16 (0.085)
METALLIZED
CASTILLATIONS (20 PLCS)
1.78 (0.070)
2.03 (0.080)
0.64
(0.025)
(20 PLCS)
0.51 (0.020)
1.52 (0.060)
2.03 (0.080)
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
SOLDER THICKNESS 0.127 (0.005) MAX.
8 Pin DIP Through Hole, 1 and 2 Channel
9.40 (0.370)
9.91 (0.390)
8.13 (0.320)
MAX.
0.76 (0.030)
1.27 (0.050)
7.16 (0.282)
7.57 (0.298)
4.32 (0.170)
MAX.
0.51 (0.020)
3.81 (0.150)
MIN.
0.20 (0.008)
0.33 (0.013)
MIN.
7.36 (0.290)
7.87 (0.310)
2.29 (0.090)
2.79 (0.110)
0.51 (0.020)
MAX.
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
3
Leaded Device Marking
Leadless Device Marking
Avago DESIGNATOR
Avago P/N
A QYYWWZ
COMPLIANCE INDICATOR,*
DATE CODE, SUFFIX (IF NEEDED)
Avago DESIGNATOR
Avago P/N
PIN ONE/
ESD IDENT
COUNTRY OF MFR.
A QYYWWZ
XXXXXX
XXXX
XXXXXX
XXX 50434
COMPLIANCE INDICATOR,*
DATE CODE, SUFFIX (IF NEEDED)
DSCC SMD*
DSCC SMD*
Avago CAGE CODE*
XXXXXX
XXXXXXX
XXX XXX
DSCC SMD*
DSCC SMD*
PIN ONE/
•
COUNTRY OF MFR.
Avago CAGE CODE*
•
50434
ESD IDENT
* QUALIFIED PARTS ONLY
* QUALIFIED PARTS ONLY
Hermetic Optocoupler Options
Option
Description
100
Surface mountable hermetic optocoupler with leads trimmed for butt joint assembly. This
option is available on commercial and hi-rel product in 8 pin DIP (see drawings below for
details).
4.32 (0.170)
MAX.
0.51 (0.020)
1.14 (0.045)
MIN.
0.20 (0.008)
0.33 (0.013)
1.40 (0.055)
2.29 (0.090)
2.79 (0.110)
0.51 (0.020)
MAX.
7.36 (0.290)
7.87 (0.310)
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
200
300
Lead finish is solder dipped rather than gold plated. This option is available on commercial
and hi-rel product in 8 pin DIP. DSCC Drawing part numbers contain provisions for lead
finish. All leadless chip carrier devices are delivered with solder dipped terminals as a
standard feature.
Surface mountable hermetic optocoupler with leads cut and bent for gull wing assembly. This
option is available on commercial and hi-rel product in 8 pin DIP (see drawings below for
details). This option has solder dipped leads.
4.57 (0.180)
MAX.
4.57 (0.180)
MAX.
0.20 (0.008)
0.33 (0.013)
0.51 (0.020)
MIN.
5° MAX.
1.40 (0.055)
1.65 (0.065)
9.65 (0.380)
9.91 (0.390)
2.29 (0.090)
2.79 (0.110)
0.51 (0.020)
MAX.
NOTE: DIMENSIONS IN MILLIMETERS (INCHES).
*Solder contains lead.
4
Absolute Maximum Ratings
No derating required up to +125°C.
Parameter
Symbol
Min.
-65
Max.
Units
°C
Note
Storage Temperature
T
S
+150
Operating Temperature
TA
TC
-55
+125
°C
Case Temperature
+170
°C
Junction Temperature
T
J
+175
°C
Lead Solder Temperature
260 for 10 sec
°C
Average Forward Current (each channel)
Peak Input Current (each channel)
Reverse Input Voltage (each channel)
Supply Voltage
IF(AVG)
10
20
3
mA
mA
V
IF(PEAK)
1
V
R
V
CC
0.0
7.0
25
10
130
200
V
Average Output Current (each channel)
Output Voltage (each channel)
Output Power Dissipation (each channel)
Package Power Dissipation (each channel)
IO(AVG)
-25
-0.5
mA
V
V
O
PO
PD
mW
mW
Single Channel Product Only
Three State Enable Voltage
V
E
-0.5
10
V
8 Pin Ceramic DIP Single Channel Schematic
I
8
ANODE
CC
V
CC
2
+
I
F
7
6
V
V
V
F
E
3
–
O
I
E
CATHODE
5
GND
Note enable pin 7. An external 0.01 µF to 0.1 µF bypass capacitor must be connected
between VCC and ground for each package type.
ESD Classification
(MIL-STD-883, Method 3015)
HCPL-5400/01/0K
(▲▲), Class 2
HCPL-5430/31/3K and HCPL-6430/31/3K
(Dot), Class 3
Recommended Operating Conditions
Parameter
Symbol Min.
Max.
10
Units
Input Current (High)
Supply Voltage, Output
Input Voltage (Low)
Fan Out (Each Channel)
IF(ON)
6
mA
V
4.75
–
5.25
0.7
5
V
CC
V
F(OFF)
V
N
–
TTL Loads
Single Channel Product Only
High Level Enable Voltage
Low Level Enable Voltage
V
2.0
0
V
V
V
EH
CC
V
EL
0.8
5
ElectricalCharacteristics
T = -55°C to +125°C, 4.75 V ≤ V ≤ 5.25 V, 6 mA ≤ IF(ON) ≤ 10 mA, 0 V ≤ VF(OFF) ≤ 0.7 V,
A
CC
unless otherwise specified.
Limits
Group A[10]
Subgroups
Parameter
Sym. Test Conditions
Min. Typ.* Max. Units Fig. Notes
Low Level Output Voltage
High Level Output Voltage
Output Leakage Current
V
IOL = 8.0 mA (5 TTL Loads)
IOH = -4.0 mA
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
0.3
0.5
V
1
2
9
9
9
OL
V
OH
2.4
V
IOHH
ICCH
V = 5.25 V, V = 0.7 V
100
26
µA
mA
O
F
Logic High
Supply
Single
Channel
V = 5.25 V, V = 0 V
CC E
17
Current
DualChannel
34
19
52
26
13
Logic Low
Supply
Single
Channel
ICCL
1, 2, 3
mA
Current
DualChannel
38
52
13
9
Input Forward Voltage
V
IF = 10 mA
1, 2, 3
1, 2, 3
1.0
3.0
1.35
4.8
1.85
V
V
4
F
Input Reverse Breakdown
Voltage
V
R
IR = 10 µA
9
Input-Output Insulation
Leakage Current
I
V
t = 5 s
I-O = 1500 Vdc, RH ≤ 65%,
1
1.0
60
60
35
µA
ns
2, 3
4, 9
4, 9
4, 9
I-O
Propagation Delay Time
Logic Low Output
tPHL
9, 10, 11
9, 10, 11
9, 10, 11
9, 10, 11
9, 10, 11
33
5,
6, 7
Propagation Delay Time
Logic High Output
tPLH
30
ns
5,
6, 7
Pulse Width
Distortion
PWD
|CMH|
|CML|
3
ns
5,
6, 7
Logic High Common
Mode Transient Immunity
VCM = 50 V , IF = 0 mA
500
500
3000
3000
V/µs
V/µs
11
5, 9,
11
P-P
Logic Low Common
Mode Transient Immunity
VCM = 50 V , IF = 6 mA
11
5, 9,
11
P-P
Single Channel Product Only
Limits
Group A[10]
Subgroups
Parameter
Sym. Test Conditions
Min. Typ.* Max. Units Fig. Notes
Logic High Enable
Voltage
V
EH
1, 2, 3
2.0
V
Logic Low Enable
Voltage
V
EL
1, 2, 3
0.8
V
Logic High Enable
Current
IEH
V = 2.4 V
1, 2, 3
1, 2, 3
1, 2, 3
20
µA
E
V = 5.25 V
E
100
Logic Low Enable
Current
IEL
V = 0.4 V
E
-0.28 -0.4 mA
High Impedance State
Supply Current
ICCZ
V = 5.25 V,
V = 5.25 V
E
1, 2, 3
1, 2, 3
22
28
mA
CC
High Impedance State
Output Current
IOZL
IOZH
V = 0.4 V, V = 2 V
-20
20
µA
O
E
V = 2.4 V, V = 2 V
O
E
V = 5.25 V, V = 2 V
100
O
E
*All typical values are at VCC = 5 V, T = 25°C, IF = 8 mA except where noted.
A
6
Typical Characteristics
All typical values are at T = 25°C, V = 5 V, IF = 8 mA, unless otherwise specified.
A
CC
Parameter
Input Current Hysteresis
Symbol Typ.
Units
mA
Test Conditions
Fig.
3
Notes
IHYS
0.25
V = 5 V
CC
Input Diode Temperature
Coefficient
∆V
∆TA
-1.11
mV/°C IF = 10 mA
4
F
Resistance (Input-Output)
Capacitance (Input-Output)
R
1012
0.6
65
Ω
V
I-O = 500 V
2
I-O
C
I-O
pF
mA
f = 1 MHz, VI-O = 0 V
2
Logic Low Short Circuit
Output Current
IOSL
V = V = 5.25 V,
IFO= 10 mA
6, 9
CC
Logic High Short Circuit
Output Current
IOSH
-50
mA
V = 5.25 V, IF = 0 mA,
O
6, 9
CC
V = GND
Output Rise Time (10-90%)
Output Fall Time (90-10%)
Propagation Delay Skew
tr
15
10
30
0.5
ns
ns
ns
5
tf
5
tPSK
PSNI
10
12
7
Power Supply Noise Immunity
V
P-P
48 Hz ≤ fac ≤ 50 MHz
Single Channel Product Only
Parameter
Symbol Typ. Units Test Conditions
Fig. Notes
Input Capacitance
C
IN
15
pF
f = 1 MHz, V = 0 V,
F
Pins 2 and 3
Output Enable Time to Logic High
Output Enable Time to Logic Low
tPZH
tPZL
tPHZ
tPLZ
15
30
20
15
ns
ns
ns
ns
8, 9
8, 9
8, 9
8, 9
Output Disable Time from Logic High
Output Disable Time from Logic Low
Dual and Quad Channel Product Only
Input Capacitance
C
15
pF
nA
Ω
f = 1 MHz, V = 0 V
IN
O
Input-Input Leakage Current
Input-Input Resistance
I
I-I
0.5
1012
1.3
RH ≤ 65%, V = 500 Vdc
8
8
8
I-I
R
I-I
V = 500 V
I-I
Input-Input Capacitance
C
I-I
pF
f = 1 MHz, V = 0 V
F
7
Notes:
the ac ripple voltage on the VCC line that the device will withstand
and still remain in the desired logic state. For desired logic high
state, VOH(MIN) > 2.0 V, and for desired logic low state, VOL(MAX) < 0.8 V.
8. Measured between adjacent input pairs shorted together for each
multichannel device.
1. Not to exceed 5% duty factor, not to exceed 50 µsec pulse width.
2. All devices are considered two-terminal devices: measured
between all input leads or terminals shorted together and all
output leads or terminals shorted together.
3. This is a momentary withstand test, not an operating condition.
4. tPHL propagation delay is measured from the 50% point on the
rising edge of the input current pulse to the 1.5 V point on the
falling edge of the output pulse. The tPLH propagation delay is
measured from the 50% point on the falling edge of the input
current pulse to the 1.5 V point on the rising edge of the output
pulse. Pulse Width Distortion, PWD = |tPHL - tPLH|.
9. Each channel.
10. Standard parts receive 100% testing at 25°C (Subgroups 1 and 9).
SMD, Class H and Class K parts receive 100% testing at 25, 125,
and –55°C (Subgroups 1 and 9, 2 and 10, 3 and 11, respectively).
11. Parameters are tested as part of device initial characterization and
after design and process changes. Parameters are guaranteed to
limits specified for all lots not specifically tested.
5. CML is the maximum slew rate of the common mode voltage that
can be sustained with the output voltage in the logic low state
12. Propagation delay skew is defined as the difference between the
minimum and maximum propagation delays for any given group
of optocouplers with the same part number that are all switching
at the same time under the same operating conditions.
13. The HCPL-6430, HCPL-6431, and HCPL-643K dual channel parts
function as two independent single channel units. Use the single
channel parameter limits.
(V
< 0.8 V). CMH is the maximum slew rate of the common
O(MAX)
mode voltage that can be sustained with the output voltage in
the logic high state (VO(MIN) > 2.0 V).
6. Duration of output short circuit time not to exceed 10 ms.
7. Power Supply Noise Immunity is the peak to peak amplitude of
Figure 1. Typical logic low output voltage vs. logic
low output current
Figure 2. Typical logic high output voltage vs.
logic high output current
Figure 3. Typical output voltage vs. input
forward current
Figure 4. Typical diode input forward current
characteristic
8
PULSE GEN.
= t 5 ns
t
=
f
r
f = 500 kHz
25 % DUTY
CYCLE
V
CC
V
5.0 V
O
OUTPUT
MONITORING
NODE
D.U.T.
I
1.3 KΩ
F
V
CC
0.1 µF
INPUT
MONITORING
NODE
30 pF
C2
100 Ω
GND
2.5 KΩ
C1
15 pF
THE PROBE AND JIG CAPACITANCES
ARE REPRESENTED BY C AND C
.
2
1
ALL DIODES ARE 1N4150 OR EQUIVALENT.
Figure 5. Test circuit for tPLH, tPHL, tr, and tf
Figure 6. Typical propagation delay vs.
ambient temperature
Figure 7. Typical propagation delay vs.
input forward current
PULSE
GENERATOR
Z
= 50 Ω
O
t
= t
=
5 ns
V
CC
r
f
5.0 V
D.U.T.
S1
V
1
2
3
4
8
7
6
5
CC
0.1 µF
I
F
V
1.3 KΩ
O
D
1
C1
30 pF
D
D
D
2
3
4
GND
INPUT V
MONITORING
NODE
E
2.5 KΩ
S2
Figure 8. Test circuit for tPHZ, tPZH, tPLZ, and tPZL. (single channel product only)
9
Figure 9. Typical enable propagation delay vs. ambient
temperature. (single channel product only)
Figure 10. Propagation delay skew, t
, waveform
PSK
I
F
V
= 5.0 V
CC
D.U.T.
B
V
CC
0.1 µF*
A
OUTPUT V
MONITORING
NODE
O
+
V
–
FF
GND
† C
15 pF
L
V
CM
V
= 5.25 V
CC
+
–
D.U.T.*
PULSE GEN.
I
I
F
CC
V
CC
I
O
0.01 µF
+
–
V
IN
2.1 V
100 Ω TYP.
100 Ω
GND
V
= 3.0 V
DC
CONDITIONS: I = 10 mA
F
I
= 25 mA
O
T
= +125 °C
A
* FOR SINGLE CHANNEL UNITS,
GROUND ENABLE PIN.
Figure 12. Operating circuit for burn-in and steady state life tests
Figure 11. Test diagram for common mode transient
immunity and typical waveforms
10
given a stimulus at the input. Propagation delay from
high to low (tPHL) specifies the amount of time required
for a system’s output to change from a Logic 1 to a
Logic 0, when given a stimulus at the input (see
Figure 5).
MIL-PRF-38534 Class H, Class K, and
DSCC SMD Test Program
Avago Technologies’ Hi-Rel Optocouplers are in
compliance with MIL-PRF-38534 Classes H and K. Class
H and Class K devices are also in compliance with DSCC
drawings 5962-89570, and 5962-89571.
When tPLH and tPHL differ in value, pulse width distortion
results. Pulse width distortion is defined as |tPHL - tPLH
|
Testing consists of 100% screening and quality
conformance inspection to MIL-PRF-38534.
and determines the maximum data rate capability of a
distortion-limited system. Maximum pulse width
distortion on the order of 25-35% is typically used when
specifying the maximum data rate capabilities of
systems. The exact figure depends on the particular
application (RS-232, PCM, T-1, etc.).
Data Rate and Pulse-Width Distortion Definitions
Propagation delay is a figure of merit which describes
the finite amount of time required for a system to
translate information from input to output when shifting
These high performance optocouplers offer the
advantages of specified propagation delay (tPLH, tPHL),
and pulse width distortion (|tPLH -t PHL|) over temperature
and power supply voltage ranges.
logic levels. Propagation delay from low to high (tPLH
)
specifies the amount of time required for a system’s
output to change from a Logic 0 to a Logic 1, when
Applications
V
= +5 V
CC1
30 pF
HCPL-5400
226 Ω
274 Ω
V
= 5 V
CC2
V
CC
0.1 µF
DATA
IN
DATA
OUT
TTL
A
LSTTL
STTL
Y
HCMOS
GND 1
GND
TOTEM
POLE
GND 2
Y = A
1
OUTPUT GATE
(e.g. 54AS1000)
2
Figure 13. Recommended HCPL-5400 interface circuit
11
V
= +5 V
CC1
HCPL-5400
V
= 5 V
CC2
464 Ω
V
CC
DATA
IN
0.1 µF
TTL
STTL
A
DATA
OUT
LSTTL
STTL
Y
GND 1
GND
OPEN
COLLECTOR
OUTPUT
GND 2
Y = A
1
GATE
(e.g. 54S05)
2
Figure 14. Alternative HCPL-5400 interface circuit
30 pF
226 Ω
V
= 5 V
CC1
HCPL-5430
V
V
= +5 V
CC2
CC
DATA
IN A
TTL
274 Ω
0.1 µF
LSTTL
STTL
DATA
OUT Y
HCMOS
TOTEM POLE
OUTPUT GATE
(e.g. 54AS1000)
TTL
LSTTL
STTL
DATA
OUT Y
HCMOS
274 Ω
DATA
IN A
GND
Y = A
GND 2
GND 1
226 Ω
30 pF
2
1
Figure 15. Recommended HCPL-5430 and HCPL-6430 interface circuit
464 Ω
V
= +5 V
CC1
HCPL-5430
DATA
IN A
V
V
= +5 V
CC
CC2
TTL
0.1 µF
LSTTL
HCMOS
STTL
DATA
OUT Y
STTL OPEN COLLECTOR
OUTPUT GATE
464 Ω
TTL
LSTTL
HCMOS
STTL
DATA
OUT Y
(e.g. 54AS05)
DATA
IN A
GND
Y = A
GND 2
GND 1
2
1
Figure 16. Alternative HCPL-5430 and HCPL-6430 interface circuit
For product information and a complete list of distributors, please go to our website: www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2007 Avago Technologies Limited. All rights reserved. Obsoletes 5968-0405E
5968-9403E June 21, 2007
相关型号:
5962-89571022A
Logic IC Output Optocoupler, 2-Element, 1500V Isolation, 40MBps, HERMETIC SEALED, CERAMIC, LCC-20
AGILENT
5962-89571022X
Logic IC Output Optocoupler, 2-Element, 1500V Isolation, 40MBps, HERMETIC SEALED, CERAMIC, DIP-8
AVAGO
5962-8957103KXA
2 CHANNEL LOGIC OUTPUT OPTOCOUPLER, 40Mbps, SURFACE MOUNT, HERMETIC SEALED, CERAMIC, DIP-8
AVAGO
5962-8957104K2X
Logic IC Output Optocoupler, 2-Element, 1500V Isolation, 40MBps, CERAMIC, LCCC-20
AVAGO
5962-8957201EA
Dual Channel Line Receiver Dual Channel Line Receiver Dual Channel Line Receiver
AGILENT
©2020 ICPDF网 联系我们和版权申明