A2500R24C00GM [ANAREN]
Telecom Circuit, 1-Func, ROHS COMPLIANT, MODULE-24;
| 型号： | A2500R24C00GM |
| 厂家： | 
ANAREN MICROWAVE |
| 描述： | Telecom Circuit, 1-Func, ROHS COMPLIANT, MODULE-24 电信 电信集成电路 |
| 文件： | 总2页 (文件大小：954K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Anaren Integrated Radio (AIR)
Low-power RF modules, firmware & development tools that make it easy to ’go wireless’
2500 Series
The A2500R24C is a high-performance, FCC & IC certified and ETSI-
compliant connectorized radio module that incorporates the Texas
Instruments CC2500 transceiver chip, all in the industry’s smallest
package: 9 x 12 x 2.5mm.
A2500R24C
Features
Benefits
Frequency range: 2400-2483.5 MHz
Minimal RF engineering experience necessary
No additional “Intentional Radiator”
certification required (FCC 15.247a2, IC RSS-
210, ETSI EN 300 328)
FCC, IC and ETSI compliant, shielded package
FCC ID: X7J-A10030501 // IC: 8975A-A10030501
Digital RSSI output
Programmable output power up to +1.0dBm
Minimal real estate required
High sensitivity (2.4 kBaud, 1% packet error rate)
Easily implemented on a two layer PCB
No additional harmonic filtering required
100% RF-tested in production
Common footprint for similar products in family
No additional DC decoupling required
Integrated analog temperature sensor
Excellent receiver selectivity and blocking
performance
Suitable for frequency hopping systems,
thanks to a fast-settling frequency synthesizer
with 90 μs settling time
Impedance-matched balun for optimized
efficiency
-104 dBm at 2442 MHz (compliant to FCC/IC/ETSI)
Ultra-small package size: 9 x 12 x 2.5mm
Industry-standard U.FL connector
LGA footprint
RoHS compliant
Operating temperature -40 to +85˚C
Impedance-controlled, multi-layer PCB
1.8 to 3.6 VDC
Low current consumption (16 mA in RX, 250
kBaud, 2442 MHz)
400 nA sleep mode current consumption
Efficient SPI interface; all registers can be
programmed with one “burst” transfer
Available in tape & reel and matrix tray
Module weight approximately 0.4 grams
Support for asynchronous and synchronous
serial receive/transmit mode for backwards
compatibility with existing radio
PLEASE NOTE: Additional information on the Texas Instruments
CC2500 device can be found in the company’s latest datasheet
release at http://www.ti.com
Block diagram
This product is not to be used in any implantable medical device or external
medical device intended to regulate or monitor biological functions, including but
not limited to devices such as pacemakers, defibrillators, cardiac
resynchronization devices, pressure sensors, biochemical stimulators and
neurostimulators. ANAREN MAKES NO WARRANTY OF FITNESS OR
MERCHANTABILITY OF THIS PRODUCT FOR ANY USE OF THIS TYPE.
Anaren shall not be responsible for any consequential damages arising from the
sale or use of this product for any use of this type. The ultimate user of the
product assumes all risk of personal injury or death arising from a prohibited use.
The item described in this
product brief is part of our
total AIR Support soluꢀon.
To learn more, visit our
website or just ask us!
Anaren, Inc.
|
6635 Kirkville Road | East Syracuse, NY 13057
www.anaren.com AIR@anaren.com
800.411.6596
|
|
Anaren Integrated Radio (AIR)
Low-power RF modules, firmware & development tools that make it easy to ’go wireless’
Product overview
Layout Information
Top 2 pads optional for compatibility with other modules. Refer to
User’s Manual for additional layout guidelines. Dimensions in mm.
The A2500R24C is a high-performance, FCC & IC
certified and ETSI-compliant connectorized radio
module that incorporates the Texas Instruments
CC2500 transceiver chip in the industry’s smallest
package (9 x 12 x 2.5mm) and is compatible with
all TI-approved software stacks.
With an LGA pad footprint and industry-standard
U.FL button connector receptacle, this module is
designed to effortlessly integrate into a wide
range of applications, including: industrial control,
building automation, low-power wireless sensor
networks, lighting control, and automated meter
reading.
The A2500R24C has an RoHS-compliant ENIG
finish and is packaged on tape & reel or in matrix
trays for high-volume automated manufacturing.
Footprint (PWB)
Pin diagram
Viewed from top side
NC = “NO Connection”
Pin is NOT connected
internally.
Ground detail (edge)
Ground detail (corner)
DNC = “Do Not Connect”
Pin reserved for internal
use, ensure mating
Nomenclature
footprint pads are isolated.
GND = “Ground”
Connect the maximum
number possible (minimum
one for proper operation).
A
(Anaren)
1 Chip series
2 Function
(CC1101, CC110L, CC2500)
(R = radio only)
3 Frequency band
4 Form factor
5 Design ID
6 Application
7 Packaging
(x100MHz)
(A = Internal Antenna, C = Connector)
(00 = Default)
(G = General)
(R = Tape/Reel, M = Matrix Tray)
Caution! ESD sensitive device.
Precautions should be used when
handling the device in order to
prevent permanent damage.
1308a
For more information
see product User’s
Manual, available
online.
The item described in this
product brief is part of our total
AIR Support solution. To learn
more, visit our website or just
ask us!
Anaren, Inc.
|
6635 Kirkville Road | East Syracuse, NY 13057
www.anaren.com AIR@anaren.com
800.411.6596
|
|
相关型号：
©2020 ICPDF网 联系我们和版权申明