MSR35H [ALLEN-BRADLEY]
Two Hand Relays; 两只手继电器
| 型号： | MSR35H |
| 厂家： | 
Allen-Bradley |
| 描述： | Two Hand Relays |
| 文件： | 总2页 (文件大小：53K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Safety Relays
Two Hand Relays
Minotaur MSR35H/HP
Specifications
Standards
EN954-1, ISO13849-1, EN574,
IEC/EN60204-1, ANSI B11.19,
AS4024.1
Safety Category
Approvals
Cat. 4 per EN954-1 (ISO13849-1)
Cat. IIIC per EN574
CE for all applicable directives, C-
Tick, cULus, TUV
Housing with removable
terminals shown.
Power Supply
24V DC SELV
Power Consumption
Safety Inputs
3W
1 N.C. & 1 N.O. (Two sets)
Max. Allowable Input Resistance 200 ohms
Outputs
2 N. O. Safety,
1 N.C. Aux,
Output Rating Safety
Auxiliary
2A @ 24VDC
50mA @ 24VDC
Description
Fuses, output external
Power On Delay
Response Time
6A slow blow or 10A quick blow
The Minotaur MSR35H/HP is a microprocessor-based, two-hand
control monitoring safety relay, with safety rated, solid state outputs.
3s
15ms
20ms
The input of the MSR35H/HP accepts two switches, each
containing one normally open and one normally closed. Both
switches must be actuated within 0.5 seconds of each other.
Recovery Time
Indication LEDs
Green = Power (Pwr)
Green = K1 Closed
Green = K2 Closed
The reset capability of the MSR35H/HP allows it to set up for
manual or automatic start and restart.
Pwr LED 3s Blink
Diagnostics Constant
2 Blinks
4 Blinks
Continuous Blinking
Initializing Phase
Normal Operation
Config. change during operation
Solid state output switch fault
Internal Fault
The outputs include two normally-open safety rated outputs that can
be connected to loads up to 2A at 24V DC. These outputs can be
used to send a safety stop signal to a machine or manufacturing
system.
Operating Temperature
Humidity
-5°C to +55°C (+14° to +131°F)
90% RH
The MSR35H/HP also has one solid state normally-closed auxiliary
output, which must only be used to indicate the status of the
MSR35H/HP.
Enclosure Protection
Terminal Protection
Pollution Degree
Conductor size
IP40 (NEMA 1), DIN 0470
IP20, DIN 0470
2
2
Features
0.2 – 2,5mm (24 – 14AWG)
•
•
•
•
•
Cat. 4 per EN954-1
Mounting
Weight
35mm DIN rail
Cat. IIIC per EN574
130g (0.287 lbs)
2 Solid State Safety Outputs
1 Solid State Auxiliary Output
Two-hand control input
Vibration
Shock
10-55Hz, 0.35mm
10g, 16ms, 100 shocks
➊ See Output Ratings on page 1-29 for details. Consult factory for ratings not
shown.
4-52
Safety Relays
Two Hand Relays
Minotaur MSR35H/HP
Product Selection
Inputs
Safety O utputs
Auxiliary O utputs
Term inals
Fixed
Catalogue Num ber
440R-D23201
Two-Hand
Control
2 N.O.
Solid state
1 N.O.
Solid state
440R-D23202
Removable
Dimensions—mm (inches) Block Diagram
22.5 (0.88)
99 (3.89)
A1
Y41
S11
S34
A1
MSR33RT/RTP
114.5
(4.5)
14
24
Y32
Y32
Y2
A2
14
S12
24
S22
S21
Typical Wiring Diagrams
+24V
+24V
L1 L2 L3
L1 L2 L3
S11 S21 A1 S34 Y41 Y2
S11 S21 A1 S34 Y41 Y2
S1
S2
S1
K1
K2
K1
K2
MSR35H/HP
MSR35H/HP
S12
A2 14 2 4 Y32
K1 K2
S12
A2 14 2 4 Y32
K1 K2
S22
S22
S2
M
M
Aux to PLC
or Indicator
Aux to PLC
or Indicator
Ground
Ground
Two-Hand Control, Dual Channel Outputs,
Automatic Reset, Output Monitoring
Two-Hand Control, Dual Channel Outputs,
Automatic Reset, Output Monitoring
4-53
相关型号：
©2020 ICPDF网 联系我们和版权申明