A6800NR-50 [AITSEMI]
LOW DROPOUT REGULATOR ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS;型号: | A6800NR-50 |
厂家: | AiT Semiconductor |
描述: | LOW DROPOUT REGULATOR ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS |
文件: | 总15页 (文件大小:846K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
DESCRIPTION
FEATURES
The A6800 series are highly accurate, low noise,
LDO Voltage Regulators that are capable of
providing an output current that is in excess of
800mA with a maximum dropout voltage of 1.0V at
800mA(A6800-1.8V).This series contains three
fixed output voltages of 1.2V, 1.8V and 2.5V that
have no minimum load requirement to maintain
regulation. On chip trimming adjusts the
Output Current in Excess of 800mA
Dropout Voltage:115mV@ IOUT =100mA
(A6800-1.8V)
Operating Voltage Range: 2.5V~15V
Highly Accuracy: ±2%
Adjustable Output Voltage Option
Standby Current: 52uA(TYP.)
High Ripple Rejection: 70dB@1KHz(A6800-1.8V)
Line Regulation: 2mV(TYP.)
reference/output voltage to within ±2% accuracy.
Internal protection features consist of output current
limiting, safe operating area compensation, and
thermal shutdown. The A6800 series can operate
with up to 15V input.
Temperature Stability≤0.5%
Thermal Shutdown Protection:160℃
Available in SOT-223 Package
APPLICATION
The A6800 is available in SOT-223 package.
Consumer and Industrial Equipment Point of
Regulation
ORDERING INFORMATION
Switching Power Supply Post Regulation
Hard Drive Controllers
Battery Chargers
Package Type
SOT-223
Part Number
A6800NR-XX
A6800NVR-XX
N
TYPICAL APPLICATION
XX: Output Voltage
33=3.3V; 50=5.0V
V: Halogen free Package
R: Tape & Reel
Note
SPQ: 2,500pcs/Reel
AiT provides all RoHS products
Suffix “ V “ means Halogen free Package
REV1.0
- DEC 2013 RELEASED -
- 1 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
PIN DESCRIPTION
Top View
Pin #
Symbol
GND
VOUT
VIN
Function
Ground
1
2
3
Output
Power Input
REV1.0
- DEC 2013 RELEASED -
- 2 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
ABSOLUTE MAXIMUM RATINGS
VIN, Input Voltage
18V
1.1A
IOUT, Output Current
VOUT, Output Voltage
VSS-0.3V~VIN +0.3V
PD, Power Dissipation
SOT-223
750mW
-40℃~+125℃
-40℃~+150℃
260℃,4sec
TOPR, Operating Temperature Range
TSTG, Storage Temperature Range
Lead Temperature
Stress beyond above listed “Absolute Maximum Ratings” may lead permanent damage to the device. These are stress ratings only and
operations of the device at these or any other conditions beyond those indicated in the operational sections of the specifications are not
implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
REV1.0
- DEC 2013 RELEASED -
- 3 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
ELECTRICAL CHARACTERISTICS
A6800-1.2V
VIN= VOUT+1.3V,CIN=CL=10uF,TA=25℃, unless otherwise noted
Parameter
Symbol
Conditions
Min.
X
Typ.
Max. Unit
VOUT(E) IOUT=10mA,
VOUT (T)
X
Output Voltage
V
NOTE2
NOTE1
VIN= VOUT+1.3V
0.98
1.02
Maximum Output Current
Load Regulation
IOUTMAX VIN= VOUT+1.3V
800
3
mA
VIN= VOUT+1.3V,
ΔVOUT
10
10
mV
1mA≤IOUT≤800mA
VDIF1
VDIF2
VDIF3
ISS
IOUT =100mA
195
665
1250
53
Dropout Voltage NOTE3
IOUT =400mA
mV
IOUT =800mA
Quiescent Current
Line Regulation
VIN= VOUT+1.3V
IOUT =0mA
uA
ΔVOUT
2
mV
VOUT+1.3V ≤VIN≤18V
IOUT=100mA,1KHz
70
68
61
VIN=4.2V+
1Vp-pAC
IOUT=200mA,1KHz
IOUT=500mA,1KHz
Ripple Rejection Rate
A6800-1.8V
PSRR
dB
VIN= VOUT+1.2V,CIN=CL=10uF,TA=25℃, unless otherwise noted
Parameter Symbol Conditions
Min.
X
Typ.
Max. Unit
VOUT(E) IOUT=10mA,
VOUT (T)
X
Output Voltage
V
NOTE 2
NOTE 1
VIN= VOUT+1.2V
0.98
1.02
Maximum Output Current
Load Regulation
IOUTMAX VIN= VOUT+1.2V
800
5
mA
VIN= VOUT+1.2V,
ΔVOUT
10
10
mV
1mA≤IOUT≤800mA
VDIF1
VDIF2
VDIF3
ISS
IOUT =100mA
115
450
940
52
Dropout Voltage NOTE 3
IOUT =400mA
mV
IOUT =800mA
Quiescent Current
Line Regulation
VIN= VOUT+1.2V
IOUT =0mA
uA
ΔVOUT
2
mV
VOUT+1.2V ≤VIN≤18V
IOUT=100mA,1KHz
70
68
61
VIN=4.8V+
1Vp-pAC
IOUT=200mA,1KHz
IOUT=500mA,1KHz
Ripple Rejection Rate
PSRR
dB
REV1.0
- DEC 2013 RELEASED -
- 4 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
A6800-2.5V
VIN= VOUT+1.2V,CIN=CL=10uF,TA=25℃, unless otherwise noted
Parameter Symbol Conditions
Min.
X
Typ.
Max. Unit
VOUT(E) IOUT=10mA,
VOUT (T)
X
Output Voltage
V
NOTE 2
NOTE 1
VIN= VOUT+1.2V
0.98
1.02
Maximum Output Current
Load Regulation
IOUTMAX VIN= VOUT+1.2V
1000
5
mA
VIN= VOUT+1.2V,
ΔVOUT
10
10
mV
1mA≤IOUT≤1000mA
VDIF1
VDIF2
VDIF3
ISS
IOUT =100mA
90
450
990
53
Dropout Voltage NOTE 3
IOUT =500mA
mV
IOUT =1000mA
VIN= VOUT+1.2V
IOUT =0mA
Quiescent Current
Line Regulation
uA
ΔVOUT
2
mV
VOUT+1.2V ≤VIN≤18V
IOUT=100mA,1KHz
70
68
61
VIN=5.5V+
1Vp-pAC
IOUT=200mA,1KHz
IOUT=500mA,1KHz
Ripple Rejection Rate
A6800-3.3V
PSRR
dB
VIN= VOUT+1.2V,CIN=CL=10uF,TA=25℃, unless otherwise noted
Parameter Symbol Conditions
Min.
X
Typ.
Max. Unit
VOUT(E) IOUT=10mA,
VOUT (T)
X
Output Voltage
V
NOTE 2
NOTE 1
VIN= VOUT+1.2V
0.98
1.02
Maximum Output Current
Load Regulation
IOUTMAX VIN= VOUT+1.2V
800
7
mA
VIN= VOUT+1.2V,
ΔVOUT
10
10
mV
1mA≤IOUT≤800mA
VDIF1
VDIF2
VDIF3
ISS
IOUT =100mA
IOUT =500mA
IOUT =800mA
VIN= VOUT+1.2V
IOUT =0mA
80
400
680
53
Dropout Voltage NOTE 3
mV
Quiescent Current
Line Regulation
uA
ΔVOUT
2
mV
VOUT+1.2V ≤VIN≤18V
IOUT=10mA,
Thermal Shutdown
Protection
Tsd
160
1.1
℃
VIN= VOUT+1.2V
VIN=5.0V
Over Current Protection
Ilimit
A
REV1.0
- DEC 2013 RELEASED -
- 5 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
A6800-5.0V
VIN= VOUT+1.2V,CIN=CL=10uF,TA=25℃, unless otherwise noted
Parameter Symbol Conditions
Min.
X
Typ.
Max. Unit
VOUT(E) IOUT=10mA,
VOUT (T)
X
Output Voltage
V
NOTE 2
NOTE 1
VIN= VOUT+1.2V
0.98
1.02
Maximum Output Current
Load Regulation
IOUTMAX VIN= VOUT+1.2V
800
8
mA
VIN= VOUT+1.2V,
ΔVOUT
10
10
mV
1mA≤IOUT≤800mA
VDIF1
VDIF2
VDIF3
ISS
IOUT =100mA
IOUT =500mA
IOUT =800mA
VIN= VOUT+1.2V
IOUT =0mA
60
300
500
53
Dropout Voltage NOTE 3
mV
Quiescent Current
Line Regulation
uA
ΔVOUT
2
mV
VOUT+1.2V ≤VIN≤18V
IOUT=10mA,
Thermal Shutdown
Protection
Tsd
160
1.1
℃
VIN= VOUT+1.2V
VIN=6.5V
Over Current Protection
Ilimit
A
NOTE1: VOUT (T): Specified Output Voltage
NOTE2: VOUT (E): Effective Output Voltage (ie. The output voltage when “VOUT (T) +1.2V”is provided at the VIN pin while maintaining a
certain IOUT value.)
NOTE3:VDIF:VIN1 –VOUT (E)’
VIN1: The input voltage when VOUT (E)’ appears as input voltage is gradually decreased.
VOUT (E)’=A voltage equal to 98% of the output voltage whenever an amply stabilized IOUT and {VOUT (T) +1.2V} is input.
REV1.0
- DEC 2013 RELEASED -
- 6 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
TYPICAL PERFORMANCE CHARACTERISTICS
1.
Output Voltage vs. Output Current
A6800-1.2V(VIN=VOUT+1.3V)
A6800-1.8V(VIN=VOUT+1.2V)
A6800-2.5V(VIN=VOUT+1.2V)
A6800-3.3V(VIN=VOUT+1.2V)
2.
Output Voltage vs. Temperature
A6800-1.2V(VIN=VOUT+1.3V , IOUT=10mA)
A6800-1.8V(VIN=VOUT+1.2V , IOUT=10mA)
REV1.0
- DEC 2013 RELEASED -
- 7 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
A6800-2.5V(VIN=VOUT+1.2V , IOUT=10mA)
A6800-3.3V(VIN=VOUT+1.2V , IOUT=10mA)
3.
Dropout Voltage vs. Output Current (TA = 25°C)
A6800-1.2V
A6800-1.8V
A6800-2.5V
A6800-3.3V
REV1.0
- DEC 2013 RELEASED -
- 8 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
4.
Ripple Rejection vs. Frequency (IO=100mA)
A6800-1.2V
A6800-1.8V
A6800-2.5V
5.
Output Voltage vs. Input Voltage (TA = 25°C)
A6800-1.2V
A6800-1.8V
REV1.0
- DEC 2013 RELEASED -
- 9 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
A6800-2.5V
A6800-3.3V
6.
Quiescent Current vs. Input Voltage
A6800-1.2V
A6800-1.8V
A6800-2.5V
A6800-3.3V
REV1.0
- DEC 2013 RELEASED -
- 10 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
BLOCK DIAGRAM
REV1.0
- DEC 2013 RELEASED -
- 11 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
DETAILED INFORMATION
Applications Information
Input Bypass Capacitor
An input capacitor is recommended. A 10uF tantalum on the input is a suitable input bypassing for almost all
applications.
Output Capacitor
The output capacitor is critical in maintaining regulator stability, and must meet the required conditions for
both minimum amount of capacitance and ESR (Equivalent Series Resistance).The minimum output
capacitance required by the A6800 is 10uF, if a tantalum capacitor is used. Any increase of the output
capacitance will merely improve the loop stability and transient response. The ESR of the output capacitor
should be less than 0.5Ω.
Load Regulation
The A6800 regulates the voltage that appears between its output and ground pins, or between its output and
adjust pins. In some cases, line resistances can introduce errors to the voltage across the load. To obtain the
best load regulation, a few precautions are needed. Figure1, shows a typical application using a fixed output
regulator. The Rt1 and Rt2 are the line resistances. It is obvious that the VLOAD is less than the VOUT by the
sum of the voltage drops along the line resistances. In this case, the load regulation seen at the RLOAD would
be degraded from the datasheet specification. To improve this, the load should be tied directly to the output
terminal on the positive side and directly tied to the ground terminal on the negative side.
Figure1. Typical Application using Fixed Output Regulator
REV1.0
- DEC 2013 RELEASED -
- 12 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
Application Circuit
1.
Regulator with Reference
2.
Adjusting Output of Fixed Voltage Regulators
3.
Battery Backed−Up Power Supply
4.
Low Dropout Negative Supply
REV1.0
- DEC 2013 RELEASED -
- 13 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
PACKAGE INFORMATION
Dimension in SOT-223 (Unit: mm)
REV1.0
- DEC 2013 RELEASED -
- 14 -
A6800
LOW DROPOUT REGULATOR
AiT Semiconductor Inc.
www.ait-ic.com
800mA ADJUSTABLE VOLTAGE HIGH SPEED LDO REGULATORS
IMPORTANT NOTICE
AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to
discontinue any integrated circuit product or service without notice, and advises its customers to obtain the
latest version of relevant information to verify, before placing orders, that the information being relied on is
current.
AiT Semiconductor Inc.'s integrated circuit products are not designed, intended, authorized, or warranted to
be suitable for use in life support applications, devices or systems or other critical applications. Use of AiT
products in such applications is understood to be fully at the risk of the customer. As used herein may involve
potential risks of death, personal injury, or servere property, or environmental damage. In order to minimize
risks associated with the customer's applications, the customer should provide adequate design and
operating safeguards.
AiT Semiconductor Inc. assumes to no liability to customer product design or application support. AiT
warrants the performance of its products of the specifications applicable at the time of sale.
REV1.0
- DEC 2013 RELEASED -
- 15 -
相关型号:
A6800SLTR-T
Latch Based Peripheral Driver, 1 Driver, BIMOS, PDSO14, LEAD FREE, MS-012AB, SOIC-14
ALLEGRO
A68015C0GL5
Axial Leaded Multilayer Ceramic Capacitors for General Purpose Class 1, Class 2 and Class 3, 50 VDC, 100 VDC, 200 VDC, 500 VDC
VISHAY
©2020 ICPDF网 联系我们和版权申明