HMC129LC4TR [ADI]
HMC129LC4TR;
| 型号： | HMC129LC4TR |
| 厂家： | 
ADI |
| 描述： | HMC129LC4TR 局域网 射频 微波 |
| 文件： | 总8页 (文件大小：368K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Typical Applications
Features
The HMC129LC4 is ideal for:
• Microwave & VSAT Radios
• Test Equipment
Conversion Loss: 7 dB
LO to RF and IF Isolation: 40 dB
Input IP3: +17 dBm
• Military EW, ECM, C3I
RoHS Compliant 4x4 mm SMT Package
Functional Diagram
General Description
The HMC129LC4 is a general purpose double-
balanced MMIC mixer housed in a leadless “PB
Free” RoHS-Compliant SMT package which can
be used as an upconverter or downconverter in the
4 to 8 GHz band. The HMC129LC4 is ideally suited
for applications where small size, no DC bias, and
consistent IC performance are required. This mixer
can operate over a wide LO drive input of +9 to +15
dBm. It performs equally well as a Bi-Phase modulator
or demodulator. The HMC129LC4 eliminates the
need for wire bonding, allowing use of surface mount
manufacturing techniques.
Electrical Specifications, TA = +25° C, LO Drive = +15 dBm*
Parameter
Min.
Typ.
Max.
Units
GHz
GHz
dB
Frequency Range, RF & LO
Frequency Range, IF
Conversion Loss
4.0 - 8.0
DC - 3.0
7
9
9
Noise Figure (SSB)
LO to RF Isolation
LO to IF Isolation
7
dB
30
32
40
40
17
50
10
dB
dB
IP3 (Input)
dBm
dBm
dBm
IP2 (Input)
1 dB Gain Compression (Input)
* Unless otherwise noted, all measurements performed as downconverter, IF = 100 MHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedby AnalogDevicesfor itsuse, norforanyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
1
Application Support: Phone: 1-800-ANALOG-D
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Conversion Gain vs. Temperature
LO = +15 dBm
Isolation @ LO = +15 dBm
0
0
-10
-5
-10
-15
-20
-20
RF/IF
LO/RF
LO/IF
-30
-40
-50
-60
+25C
+85C
-40C
3
4
5
6
7
8
9
9
4
3
4
5
6
7
8
8
8
9
9
9
FREQUENCY (GHz)
FREQUENCY (GHz)
Conversion Gain vs. LO Drive
Return Loss @ LO = +15 dBm
0
0
-5
-10
-15
-5
-10
+ 11 dBm
-15
+ 13 dBm
LO Return Loss
-20
+ 15 dBm
RF Return Loss
-20
-25
3
4
5
6
7
8
3
4
5
6
7
FREQUENCY (GHz)
FREQUENCY (GHz)
Upconverter Performance
Conversion Gain vs. LO Drive
IF Bandwidth @ LO = +15 dBm
0
0
Return Loss
Conversion Gain
-5
-5
-10
-15
-10
LO = + 11 dBm
LO = + 13 dBm
LO = + 15 dBm
-15
-20
0
0.5
1
1.5
2
2.5
3
3.5
3
4
5
6
7
FREQUENCY (GHz)
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedby AnalogDevicesfor itsuse, norforanyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
2
Application Support: Phone: 1-800-ANALOG-D
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Input IP3 vs.
Temperature @ LO = +15 dBm
Input IP3 vs. LO Drive
30
30
+25C
LO = + 11 dBm
LO = + 13 dBm
LO = + 15 dBm
25
25
20
15
10
+85C
-40C
20
15
10
3
4
5
6
7
8
9
3
4
5
6
7
8
9
FREQUENCY (GHz)
FREQUENCY (GHz)
Input IP2 vs.
Temperature @ LO = +15 dBm
Input IP2 vs. LO Drive
70
70
LO = + 11 dBm
LO = + 13 dBm
LO = + 15 dBm
65
60
55
50
45
40
65
60
55
50
+25C
+85C
-40C
45
40
3
4
5
6
7
8
9
3
4
5
6
7
8
9
FREQUENCY (GHz)
FREQUENCY (GHz)
Input P1dB vs.
Temperature @ LO = +15 dBm
Harmonics of LO
18
nLO Spur @ RF Port
LO Freq. (GHz)
1
2
3
4
16
3
55
42
42
39
35
35
29
15
47
50
54
54
55
63
45
42
57
42
54
40
35
45
37
35
68
69
56
66
63
82
81
88
+25C
+85C
-40C
4
14
12
10
8
5
6
7
8
9
10
LO = +15 dBm
3
4
5
6
7
8
9
All values in dBc below input LO level measured at RF port
FREQUENCY (GHz)
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedby AnalogDevicesfor itsuse, norforanyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
3
Application Support: Phone: 1-800-ANALOG-D
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Absolute Maximum Ratings
MxN Spurious @ IF Port
nLO
RF/IF Input
+15 dBm
+27 dBm
4 mA
mRF
0
1
10
0
2
25
33
70
87
104
3
13
4
LO Drive
0
1
2
3
4
xx
9
41
IF DC Current
Channel Temperature
44
78
64
109
46
86
81
110
150 °C
78
88
97
76
91
102
Continuous Pdiss (T = 85 °C)
(derate 4.957 mW/ °C above 85 °C)
124 mW
Thermal Resistance
(channel to ground paddle)
131.4 °C/W
RF Freq. = 6.1 GHz @ -10 dBm
LO Freq. = 6.0 GHz @ +15 dBm
Measured as downconverter
Storage Temperature
Operating Temperature
ESD Sensitivity (HBM)
-65 to +150 °C
-40 to +85 °C
Class 1A
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedby AnalogDevicesfor itsuse, norforanyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
4
Application Support: Phone: 1-800-ANALOG-D
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Outline Drawing
NOTES:
1. PACKAGE BODY MATERIAL: ALUMINA
2. LEAD AND GROUND PADDLE PLATING: GOLD FLASH OVER Ni
3. DIMENSIONS ARE IN INCHES [MILLIMETERS]
4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
MSL3 [1]
Package Marking [2]
H129
XXXX
HMC129LC4
Alumina, White
Gold over Nickel
[1] Max peak reflow temperature of 260 °C
[2] 4-Digit lot number XXXX
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedby AnalogDevicesfor itsuse, norforanyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
5
Application Support: Phone: 1-800-ANALOG-D
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Pin Descriptions
Pin Number
Function
Description
Interface Schematic
1, 5 - 7, 11 - 14,
18 - 24
No Connection. These pins may be connected to RF/DC ground.
Performance will not be affected.
N/C
2, 4, 8, 10,
15, 17
These pins and package bottom
must be connect to RF/DC ground.
GND
This pin is DC coupled
and matched to 50 Ohms.
3
9
RF
This pin is DC coupled. For applications not requiring operation
to DC, this port should be DC blocked externally using a series
capacitor whose value has been chosen to pass the necessary IF
frequency range. For operation to DC, this pin must not source/
sink more than 2 mA of current or die non-function and possible
die failure will result.
IF
This pin is DC coupled
and matched to 50 Ohms.
16
LO
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedby AnalogDevicesfor itsuse, norforanyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
6
Application Support: Phone: 1-800-ANALOG-D
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Evaluation PCB
List of Materials for Evaluation PCB 109728 [1]
The circuit board used in the application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation circuit board shown is available from Hit-
tite upon request.
Item
J1 - J3
U1
Description
PCB Mount SMA Connector
HMC129LC4
[2]
PCB
109726 Evaluation Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedby AnalogDevicesfor itsuse, norforanyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
7
Application Support: Phone: 1-800-ANALOG-D
HMC129LC4
v03.0414
GaAs MMIC DOUBLE-BALANCED
MIXER, 4 - 8 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
For price, delivery, and to place orders: Analog Devices, Inc.,
responsibilityisassumedby AnalogDevicesfor itsuse, norforanyinfringementsofpatentsor other
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
rights of third parties that may result from its use. Specifications subject to change without notice. No
Phone: 781-329-4700 • Order online at www.analog.com
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are thepropertyoftheir respectiveowners.
8
Application Support: Phone: 1-800-ANALOG-D
相关型号：
©2020 ICPDF网 联系我们和版权申明