ADL5521ACPZ-R7 [ADI]
400 MHz - 4 GHz Low Noise Amplifier; 400兆赫 - 4 GHz的低噪声放大器型号: | ADL5521ACPZ-R7 |
厂家: | ADI |
描述: | 400 MHz - 4 GHz Low Noise Amplifier |
文件: | 总6页 (文件大小:479K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
400 MHz – 4 GHz Low Noise Amplifier
ADL5521
Preliminary Technical Data
FEATURES
FUNCTIONAL BLOCK DIAGRAM
Gain of 15.3dB at 1950MHz
Matched 50-Ω input and output
Noise Figure of 0.8dB at 1950MHz
OIP3 of 35.3dBm typ at 1950MHz
Single 5V Supply Operation
Operating current of 65ma at +5V
LFCSP 3x3 mm Package
ADL5521
VBIAS
BIAS
VDD
OUT
INP
GENERAL DESCRIPTION
GND
GND
The ADL5521 is a high performance GaAs pHEMT low-noise
amplifier. It provides high gain and low noise figure for single
down-conversion IF sampling receiver architectures as well as
direct down conversion receivers.
Figure 1.
.
The ADL5521 amplifier comes in a compact, thermally
enhanced 3x3mm LFCSP package and operates over the
temperature range of −40°C to +85°C.
Rev. PrA
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.326.8703
www.analog.com
© 2003 Analog Devices, Inc. All rights reserved.
ADL5521
Preliminary Technical Data
SPECIFICATIONS
VS = 5 V, T = 25°C , fC= 1950MHz
Table 1.
Parameter
Conditions
Min
Typ
Max
Unit
Input return loss
Output return loss
Gain
External match
External match
12
dB
20.7
15.3
0.015
0.018
0.8
dB
dB
Gain Flatness
In the [1920 – 1980] frequency band
In the [1920 – 1980] frequency band
dB/MHz
dB/degC
dB
Gain vs. Temperature
Noise Figure
Output IP3
35.3
22.5
dBm
dBm
Output 1 dB Compression Point
S12 Isolation
21.4
dB
POWER-INTERFACE
Supply Voltage
4.5
5
5.5
V
Current Consumption
65
TBD mA
Rev. PrA | Page 2 of 6
Preliminary Technical Data
ADL5521
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameter
Rating
5.5 V
Supply Voltage, VPOS
Max RF Input Level
TBD
Internal Power Dissipation
θJA (Exposed paddle soldered down)
TBD mW
TBD mW
θJA (Exposed paddle not soldered down) TBD°C/W
Stresses above those listed under Absolute Maximum
θJC (At exposed paddle)
TBD°C/W
Ratings may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device at these or any other conditions above those
listed in the operational sections of this specification
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
Maximum Junction Temperature
Operating Temperature Range
Storage Temperature Range
Lead Temperature Range
(Soldering 60 sec)
TBD°C/W
TBD°C
–40°C to +85°C
–65°C to +150°C
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the
human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. PrA | Page 3 of 6
ADL5521
Preliminary Technical Data
PIN CONFIGURATION AND FUNCTIONAL DESCRIPTIONS
VBIAS
INP
VDD
OUT
NC
1
2
3
8
7
6
ADL5521
top view
NC
(not to scale)
Exposed pad
NC
4
NC
5
Figure 2. 8-Lead LFCSP
Table 3. Pin Function Descriptions- 8Lead CSP
Description
Pin No.
Mnemonic
VBIAS
INP
1
Bias: Internal DC bias
2
RF Input: Must be AC-coupled.
NC: No internal connection
RF Output: Must be AC-coupled.
3,4,5,6
NC
7
8
OUT
VDD
Supply: VDD bias needs to be bypassed to ground using
low-inductance capacitors.
Exposed Paddle: Connect to a low impedance ground plane
Exposed pad
EP
Rev. PrA | Page 4 of 6
Preliminary Technical Data
ADL5521
38
37
36
35
34
33
32
31
30
29
28
27
26
25
-40°C (1920MHz
1950MHz
TYPICAL PERFORMANCE
CHARACTERISTICS
1980MHz)
+85°C (1920MHz
1950MHz
70
69
68
67
66
65
64
63
62
61
60
+25°C (1920MHz
1980MHz)
1950MHz
1980MHz)
-8
-6
-4
-2
0
2
4
6
8
10
12
14
16
18
20
Pout - dBm
Figure 7. O IP3 vs. Output Power, Temperature and Frequency
3.5
-40
-30
-20
-10
0
10
20
30
40
50
60
70
80
90
Temperature - degC
3
2.5
2
Figure 3. ADL5521 Current vs. Temperature
30
25
20
15
10
5
1.5
1
Gain (-40°C
+25°C
0.5
+85°C)
Output Power (-40°C
+25°C
0
1920
1930
1940
1950
1960
1970
1980
+85°C)
Frequency (MHz)
0
-5
Figure 8. Distribution of Noise Figure for Five Parts, 1920 to 1980 MHz
-10
-25
-20
-15
-10
Pin - dBm
-5
0
5
10
3.5
3
Figure 4. Output Power and Gain vs. Temperature
2.5
2
30
40
35
30
25
20
15
10
5
OIP3 (-40°C
+25°C
+85°C)
28
26
24
22
20
18
16
14
1.5
1
P1dB (-40°C
+25°C
+85°C)
0.5
0
400
900
1400
1900
2400
2900
Gain (-40°C
+25°C
Frequency (MHz)
+85°C)
0
1920
1930
1940
1950
1960
1970
1980
Figure 9. Distribution of Noise Figure for Five Parts, Complete Frequency
Range
Freq - MHz
20
15
Figure 5 Gain, P1dB, OIP3 vs. Frequency
S21
18
16
14
12
10
8
10
5
0
-5
S11
-10
-15
6
S22
-20
4
S12
2
-25
0
-30
400
900
1400
1900
2400
2900
1920
1930
1940
1950
1960
1970
1980
Frequency - MHz
Freq - MHz
Figure 6. Gain vs. Frequency, Complete Frequency Range, 5 Parts
Figure 10. Typical S Parameters, 1920 to 1980 MHz
Rev. PrA | Page 5 of 6
ADL5521
Prelim Datasheet
OUTLINE DIMENSIONS
0.50
0.40
0.30
3.25
3.00 SQ
2.75
0.60 MAX
PIN 1
INDICATOR
0.50
BSC
1
8
2.95
2.75 SQ
2.55
1.89
1.74
1.59
PIN 1
INDICATOR
TOP
VIEW
EXPOSED
PAD
(BOTTOM VIEW)
4
5
0.30
0.23
0.18
1.60
1.45
1.30
12° MAX
0.70 MAX
0.65TYP
0.90 MAX
0.85 NOM
0.05 MAX
0.01 NOM
0.20 REF
Figure 11. 8-Lead Lead Frame Chip Scale Package [LFCSP_VD]
3mm × 3 mm Body, Very Thin, Dual Lead
CP-8-2
Dimensions shown in millimeters
ORDERING GUIDE
Model
ADL5521ACPZ-R71
ADL5521ACPZ-WP1
ADL5521-EVALZ
Temperature Range
–40°C to +85°C
–40°C to +85°C
Package Description
7” Tape and Reel
Waffle Pack
Package Option
CP-8-2
CP-8-2
Evaluation Board
1 Z = Pb free part
©2007 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
PR06828-0-5/07(PrA)
Rev. PrA | Page 6 of 6
相关型号:
ADL5530ACPZ-R2
DC to 1000 MHz IF Gain Block; Package: LFCSP (2x3x.85mm); No of Pins: 8; Temperature Range: Industrial
ADI
©2020 ICPDF网 联系我们和版权申明