ACTQ965/868.35/QCC8C [ACT]
surface-acoustic-wave (SAW) resonator; 表面声波( SAW)谐振型号: | ACTQ965/868.35/QCC8C |
厂家: | ADVANCED CRYSTAL TECHNOLOGY |
描述: | surface-acoustic-wave (SAW) resonator |
文件: | 总3页 (文件大小:68K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: info@actcrystals.com
The ACTQ965/868.35/QCC8C is a two-port, 180° surface-acoustic-wave (SAW) resonator in a
surface-mount ceramic QCC8C case. It provides reliable, fundamental-mode, quartz frequency
stabilization i.e. in transmitters or local oscillators operating at 868.350 MHz.
1.Package Dimension (QCC8C)
2.
Pin
2
Configuration
Input / Output
Input / Output
Case Ground
Empty
6
4,8
1,3,5,7
Sign
A
Data (unit: mm)
Sign
Data (unit: mm)
2.08
0.6
E
F
1.2
1.35
5.0
B
C
1.27
2.54
G
H
D
5.0
3.Equivalent LC Model and Test Circuit
4.Typical Application Circuits
1) Low-Power Transmitter Application
2) Local Oscillator Application
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
Issue : 1 C1
Date : SEPT 04
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: info@actcrystals.com
5.Typical Frequency Response
6.Temperature Characteristics
7.Performance
7-1.Maximum Ratings
Rating
Value
Units
CW RF Power Dissipation
10
dBm
DC Voltage Between Terminals
Case Temperature
±30V
VDC
-40 to +85
+250
°C
°C
Soldering Temperature
7-2.Electronic Characteristics
Characteristics
Sym
fC
Minimum
Typical
Maximum
Units
MHz
kHz
Absolute Frequency
868.200
868.500
Centre Frequency
(+25°C)
Tolerance from 868.350 MHz
DfC
IL
±150
6.5
Insertion Loss
Quality Factor
8.0
55
dB
Unloaded Q
QU
QL
6,260
3,300
50 W Loaded Q
Turnover Temperature
Turnover Frequency
Frequency Temperature Coefficient
T0
25
1.0
°
C
Temperature
Stability
f0
fc
kHz
2
FTC
|fA|
0.03
≤10
°
ppm/ C
Frequency Aging Absolute Value during the First Year
DC Insulation Resistance Between Any Two Terminals
Motional Resistance
ppm/yr
MW
W
RM
LM
CM
C0
111.35
127.8974
0.2629
1.35
151
Motional Inductance
RF Equivalent
mH
RLC Model
Motional Capacitance
fF
Shunt Static Capacitance
1.20
1.50
pF
iCAUTION: Electrostatic Sensitive Device. Observe precautions for handling!
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
Issue : 1 C1
For quotations or further information please contact us at:
Date : SEPT 04
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: info@actcrystals.com
1. The frequency fC is the frequency of minimum IL with the resonator in the specified test fixture in a 50 Ω test
system with VSWR≤1.2:1.
2. Unless noted otherwise, case temperature TC = +25°C±2°C.
3. Frequency aging is the change in fC with time and is specified at +65°C or less. Aging may exceed the
specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after
manufacture, decreasing in subsequent years.
4. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f0. The nominal frequency at
any case temperature, TC, may be calculated from: f = f0 [1 - FTC (T0 - TC)2].
5. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided
for reference only. The capacitance C0 is the measured static (non-motional) capacitance between input terminal
and ground or output terminal and ground. The measurement includes case parasitic capacitance.
6. Derived mathematically from one or more of the following directly measured parameters: f C, IL, 3 dB bandwidth,
fC versus TC, and C0.
7. The specifications of this device are based on the test circuit shown above and subject to change or
obsolescence without notice.
8. Typically, equipment utilizing this device requires emissions testing and government approval, which is the
responsibility of the equipment manufacturer.
9. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,
processes and circuits implemented within components or assemblies.
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
Issue : 1 C1
Date : SEPT 04
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
相关型号:
©2020 ICPDF网 联系我们和版权申明