ACTR0016 [ACT]
true one-port, surface-acoustic-wave (SAW) resonator; 真正的一个端口,表面声波( SAW)谐振型号: | ACTR0016 |
厂家: | ADVANCED CRYSTAL TECHNOLOGY |
描述: | true one-port, surface-acoustic-wave (SAW) resonator |
文件: | 总3页 (文件大小:62K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: info@actcrystals.com
The ACTR0016/916.5/QCC8C is a true one-port, surface-acoustic-wave (SAW) resonator in a
surface-mount ceramic QCC8C case. It provides reliable, fundamental-mode, quartz frequency
stabilization i.e. in transmitters or local oscillators operating at 916.500 MHz.
1.Package Dimension (QCC8C)
2.
Pin
2
Configuration
Input / Output
Output / Input
Case Ground
N C
6
4,8
1,3,5,7
Sign
A
Data (unit: mm)
Sign
Data (unit: mm)
2.08
0.6
E
F
1.2
1.35
5.0
B
C
1.27
2.54
G
H
D
5.0
3.Equivalent LC Model and Test Circuit
4.Typical Application Circuits
1) Low-Power Transmitter Application 2) Local Oscillator Application
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Issue : 1 C1
Date : SEPT 04
1 OF 3
Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: info@actcrystals.com
5.Typical Frequency Response
6.Temperature Characteristics
7.Performance
7-1.Maximum Ratings
Rating
Value
Unit
dBm
V
CW RF Power Dissipation
P
0
DC Voltage Between Terminals
Storage Temperature Range
Operating Temperature Range
VDC
Tstg
TA
±30
-40 to +85
-10 to +60
°C
°C
7-2.Electronic Characteristics
Characteristic
Sym
Minimum
Typical
Maximum
Unit
MHz
kHz
dB
Absolute Frequency
fC
916.350
916.650
Centre Frequency
(+25°C)
Tolerance from 916.500 MHz
D
fC
±150
1.5
Insertion Loss
Quality Factor
IL
2.2
55
Unloaded Q
QU
QL
10,020
1,500
50 W Loaded Q
Turnover Temperature
Turnover Frequency
Frequency Temperature Coefficient
T0
25
1.0
1.8
°
C
Temperature
Stability
f0
fC
kHz
ppm/°C2
ppm/yr
FTC
0.032
≤10
Frequency Aging Absolute Value during the First Year
DC Insulation Resistance Between Any Two Terminals
Motional Resistance
fA
| |
M
W
RM
LM
CM
C0
19
29
W
Motional Inductance
RF Equivalent
31.0132
0.9734
2.1
mH
RLC Model
Motional Capacitance
fF
pF
Shunt Static Capacitance
2.4
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
Issue : 1 C1
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
Date : SEPT 04
2 OF 3
Tel : +44 118 979 1238
Fax : +44 118 979 1283
Email: info@actcrystals.com
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling!
i
1. The centre frequency, fC, is measured at the minimum IL point with the resonator in the 50 Ω test system.
2. Unless noted otherwise, case temperature TC = +25°C±2°C.
3. Frequency aging is the change in fC with time and is specified at +65°C or less. Aging may exceed the
specification for prolonged temperatures above +65°C. Typically, aging is greatest the first year after
manufacture, decreasing in subsequent years.
4. Turnover temperature, T0, is the temperature of maximum (or turnover) frequency, f0. The nominal frequency
at any case temperature, TC, may be calculated from: f = f0 [1 - FTC (T0 - TC)2].
5. This equivalent RLC model approximates resonator performance near the resonant frequency and is provided
for reference only. The capacitance C0 is the measured static (non-motional) capacitance between the two
terminals. The measurement includes case parasitic capacitance.
6. Derived mathematically from one or more of the following directly measured parameters: f C, IL, 3 dB
bandwidth, fC versus TC, and C0.
7. The specifications of this device are based on the test circuit shown above and subject to change or
obsolescence without notice.
8. Typically, equipment utilizing this device requires emissions testing and government approval, which is the
responsibility of the equipment manufacturer.
9. Our liability is only assumed for the Surface Acoustic Wave (SAW) component(s) per se, not for applications,
processes and circuits implemented within components or assemblies.
In keeping with our ongoing policy of product evolvement and improvement, the above specification is subject to change without notice.
ISO9001: 2000 Registered - Registration number 6830/2
Issue : 1 C1
Date : SEPT 04
For quotations or further information please contact us at:
3 The Business Centre, Molly Millars Lane, Wokingham, Berks, RG41 2EY, UK
http://www.actcrystals.com
3 OF 3
相关型号:
©2020 ICPDF网 联系我们和版权申明