ZNCL11 [ZILOG]
ZMOTION® Lenses;ZMOTION® Lenses
Product Specification
PS028610-1114
Copyright ©2014 Zilog, Inc. All rights reserved.
www.zilog.com
ZMOTION® Lenses
Product Specification
ii
DO NOT USE THIS PRODUCT IN LIFE SUPPORT SYSTEMS.
Warning:
LIFE SUPPORT POLICY
ZILOG'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE
SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF
THE PRESIDENT AND GENERAL COUNSEL OF ZILOG CORPORATION.
As used herein
Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b)
support or sustain life and whose failure to perform when properly used in accordance with instructions for
use provided in the labeling can be reasonably expected to result in a significant injury to the user. A
critical component is any component in a life support device or system whose failure to perform can be
reasonably expected to cause the failure of the life support device or system or to affect its safety or
effectiveness.
Document Disclaimer
©2014 Zilog, Inc All rights reserved. Information in this publication concerning the devices, applications,
or technology described is intended to suggest possible uses and may be superseded. ZILOG, INC. DOES
NOT ASSUME LIABILITY FOR OR PROVIDE A REPRESENTATION OF ACCURACY OF THE
INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED IN THIS DOCUMENT. ZILOG ALSO
DOES NOT ASSUME LIABILITY FOR INTELLECTUAL PROPERTY INFRINGEMENT RELATED
IN ANY MANNER TO USE OF INFORMATION, DEVICES, OR TECHNOLOGY DESCRIBED
HEREIN OR OTHERWISE. The information contained within this document has been verified according
to the general principles of electrical and mechanical engineering.
ZMOTION and Z8 Encore! XP are trademarks or registered trademarks of Zilog, Inc. (An IXYS
Company). All other product or service names are the property of their respective owners.
PS028610-1114
Disclaimer
ZMOTION® Lenses
Product Specification
iii
Revision History
Each instance in the revision history table reflects a change to this document from its pre-
vious revision. For more details, refer to the corresponding pages or appropriate links pro-
vided in the table below.
Revision
Date Level
Description
Page
Nov
2014
10
Changed focus of spec to cover ZMOTION lenses only; see All
related ZMOTION Pyroelectric Sensors Product
Specification (PS0336).
Feb
2013
09
Moved NCL-11 lens specification to Table 1; added the CM 2, 7
0.77 GI V2 lens specification; alphanumerically reordered all
lenses.
May
2012
08
07
06
05
04
03
Added the NCL-11 and EWA 0.3 GI V2 lens specifications. 35, 17
Nov
2011
Added the NCL-3R and NCL-10S lens specifications.
Intrusion lens specifications added.
21, 33
37
Mar
2011
Jan
2011
Modifications to some lens/sensor descriptions in Table 1.
Updated to include two new Nicera sensors.
2
Jan
2011
18, 28
All
Nov
2010
Updated to new Zilog/IXYS logo and accepted Zilog style;
replaced all instances of ePIR with advanced passive
infrared.
Sep
2010
02
01
Replaced Zilog logos, ePIR with ZMOTION, and Zdots with All
Module; fixed formatting and pagination issues; removed
references to GP and General Purpose.
Oct
Original issue
All
2010
PS028610-1114
Revision History
ZMOTION® Lenses
Product Specification
iv
Table of Contents
Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii
List of Figures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
List of Tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .vi
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
ZMOTION Lens Selection Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ZMOTION Detection and Control Lens Specifications . . . . . . . . . . . . . . . . . . . . . . . 5
ZAA09GIT1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
ZCM077GIV2 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
ZCM077GIV3 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
ZCM077GIV5 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
ZCWM05GIV1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
ZEWA03GIV2 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
ZNCL3B Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
ZNCL10R Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
ZNCL926 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
ZNCL10IL Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
ZNCL10S Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
ZNCL11 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
ZMOTION Intrusion Detection Lens Specifications . . . . . . . . . . . . . . . . . . . . . . . . 37
ZLR12GI12V3 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
ZVB12GIV1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
ZWA12GI12V4 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Related Documents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Customer Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
PS028610-1114
Table of Contents
ZMOTION® Lenses
Product Specification
v
List of Figures
Figure 1. The ZAA09GIT1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Figure 2. The ZCM077GIV2 Lens Specification: Front View . . . . . . . . . . . . . . . . . . . 7
Figure 3. The ZCM077GIV2 Lens Specification: Floor Coverage, Side View . . . . . . 8
Figure 4. The ZCM077GIV3 Lens Specification, #1 of 2 . . . . . . . . . . . . . . . . . . . . . . 9
Figure 5. The ZCM077GIV3 Lens Specification, #2 of 2 . . . . . . . . . . . . . . . . . . . . . 10
Figure 6. The ZCM077GIV5 Lens Specification, #1 of 3 . . . . . . . . . . . . . . . . . . . . . 11
Figure 7. The ZCM077GIV5 Lens Specification, #2 of 3 . . . . . . . . . . . . . . . . . . . . . 12
Figure 8. The ZCM077GIV5 Lens Specification, #3 of 3 . . . . . . . . . . . . . . . . . . . . . 13
Figure 9. The ZCWM05GIV1 Lens Specification: Wall Mount . . . . . . . . . . . . . . . . 15
Figure 10. The ZCWM05GIV1 Lens Specification: Ceiling Mount, #1 of 2 . . . . . . . . 16
Figure 11. The ZCWM05GIV1 Lens Specification: Ceiling Mount, #2 of 2 . . . . . . . . 17
Figure 12. The ZEWA03GIV2 Lens Specification, Dimensions . . . . . . . . . . . . . . . . . 18
Figure 13. The ZNCL3B Lens Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Figure 14. The ZNCL3B Lens Specification, X Axis . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Figure 15. The ZNCL3B Lens Specification, Y Axis . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Figure 16. The ZNCL10R Lens Specification, Dimensions . . . . . . . . . . . . . . . . . . . . . 22
Figure 17. The ZNCL10R Dual-Element Lens Specification, Tab Direction A . . . . . . 23
Figure 18. The ZNCL10R Dual-Element Lens Specification, Tab Direction B . . . . . . 24
Figure 19. The ZNCL10R Quad-Element Lens Specification, Tab Direction A,
X Axis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Figure 20. The ZNCL926 Lens Specification, Dimensions . . . . . . . . . . . . . . . . . . . . . 26
Figure 21. The ZNCL926 Detection Area with Quad-Element PIR . . . . . . . . . . . . . . . 27
Figure 22. The ZNCL926 Detection Area with Dual-Element PIR . . . . . . . . . . . . . . . 28
Figure 23. The ZNCL10IL Lens Specification, Dimensions . . . . . . . . . . . . . . . . . . . . 29
Figure 24. The ZNCL10IL Lens Specification, Tab Direction A, X Axis . . . . . . . . . . 30
Figure 25. The ZNCL10IL Lens Specification, Tab Direction A, Y Axis . . . . . . . . . . 31
Figure 26. The ZNCL10IL Lens Specification, Tab Direction B, X Axis . . . . . . . . . . 32
Figure 27. The ZNCL10IL Lens Specification, Tab Direction B, Y Axis . . . . . . . . . . 33
Figure 28. The ZNCL10S Lens Specification, Dimensions . . . . . . . . . . . . . . . . . . . . . 34
Figure 29. The ZNCL10S Dual-Element Lens Specification, X/Y Axes . . . . . . . . . . . 35
Figure 30. The ZNCL11 Lens Specification, Dimensions . . . . . . . . . . . . . . . . . . . . . . 36
Figure 31. The ZNCL11 Detection Area, X/Y Axes . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Figure 32. ZLR12GI12V3 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Figure 33. ZVB12GIV1 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Figure 34. ZWA12GI12V4 Lens Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
PS028610-1114
List of Figures
ZMOTION® Lenses
Product Specification
vi
List of Tables
Table 1.
Table 2.
ZMOTION Detection and Control Lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
ZMOTION Intrusion Detection Lenses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
PS028610-1114
List of Tables
ZMOTION® Lenses
Product Specification
1
Overview
Zilog’s ZMOTION Detection and Control and Intrusion Detection product families pro-
vide integrated and flexible solutions for Passive Infrared (PIR)-based motion detection
applications. These product families are based on the ZMOTION MCU, a high-perfor-
mance microcontroller featuring integrated PIR motion detection algorithms. Each family
includes a selection of lenses and PIR sensors to fit a wide range of application require-
ments. Each lens combination is optimized for its intended application by configuration
settings loaded into the ZMOTION MCU ensuring the best possible performance while
significantly reducing development risk and minimizing time to market. Zilog’s PIR
Motion Detection Technology provides a dramatic improvement in both sensitivity and
stability over traditional designs and is scalable to many market segments including Secu-
rity/Intrusion Detection, Lighting Control, HVAC, Access Control, Vending, Display,
Proximity, Power Management, Occupancy Sensing and many others.
This document provides the zone patterns and mechanical dimensions for the Zilog-sup-
ported lenses included in the ZMOTION Family. Each supported lens combination is pro-
vided with an associated configuration file for the ZMOTION MCU. It is possible to use
other lenses not directly supported by Zilog by developing the appropriate configuration
settings based on one of the existing files.
There are two general groups of lenses provided:
•
•
ZMOTION Detection and Control for general motion detection applications
ZMOTION Intrusion Detection for security applications
These lens groupings are based on typical usage; any of these lenses could be used for a
variety of applications and are not limited to these suggested applications. All lenses listed
in this document are available from Zilog or from their associated manufacturers. Because
Zilog is regularly adding new lens support to these ZMOTION product families, please
obtain the latest version of this document from our website at: www.zilog.com/ZMO-
TION.
To review the configuration files for specific lens and sensor combinations, refer to the
ZMOTION Detection Lens and Pyroelectric Sensor Configuration Guide (WP0018).
Note:
PS028610-1114
Overview
ZMOTION® Lenses
Product Specification
2
ZMOTION Lens Selection Guide
Select a lens and pyroelectric sensor based on the intended application from Table 1.
Lenses for security/intrusion-related applications are listed in Table 2. To see the specifi-
cations for lenses used in security and intrusion detection applications, refer to the ZMO-
TION Pyroelectric Sensors Specification (PS0336).
Table 1. ZMOTION Detection and Control Lenses
Recommended Manufacturer
Recommended
Applications
Pyroelectric
Sensor(s)
and MFR Part
Number
Part Number Description
ZAA09GIT1
Lens
Specification –
see page 6
Animal Alley Array (88°) Corner wall mount or very ZRE200BP
Fresnel
Technologies
Inc.
high ceiling with
rectangular floor pattern
•
35.6mm x 49.9mm Flat
Fresnel lens
ZSBG446671
•
•
•
22.9mm focal length
25 meter range
22 equal segments
•
•
•
Warehouse Lighting
(Bay Light)
Combined Intrusion
and Lighting Control
HVAC
AA 0.9 GI T1
ZCM077GIV2 Ceiling Mount Array
Low height ceiling mount ZSBG446671
for commercial lighting
control
37mm diameter circular
Fresnel
Technologies
Inc.
Lens
(360°)
Specification –
see page 7
•
lens
• Commercial HVAC
CM 0.77 GI V2
•
•
19.6mm focal length
12.2m radius at 3.7m
height
•
4:1 floor coverage
diameter-to-height ratio
ZCM077GIV3 Ceiling Mount Array
Ceiling Mount for
standard commercial
heights
37mm diameter circular
ZSBG446671
Fresnel
Technologies
Inc.
Lens
(360°)
Specification –
see page 9
•
lens
•
•
•
Lighting Control
HVAC Control
Meeting rooms
CM 0.77 GI V3
•
•
19.6mm focal length
3.7m radius at 2.4m
height
•
3:1 floor coverage
diameter to height ratio
PS028610-1114
ZMOTION Lens Selection Guide
ZMOTION® Lenses
Product Specification
3
Table 1. ZMOTION Detection and Control Lenses (Continued)
Recommended Manufacturer
Recommended
Applications
Pyroelectric
Sensor(s)
and MFR Part
Number
Part Number Description
ZCM077GIV5 Ceiling Mount Array
High ceiling mount for
commercial and industrial
applications
37mm diameter circular
ZSBG446671
Fresnel
Technologies
Inc.
Lens
(360°)
Specification –
see page 11
•
lens
•
Commercial Lighting
Control
CM 0.77 GI V5
•
•
19.6mm focal length
12.2m radius at 12.2m
height
•
Commercial HVAC
Control
•
2:1 floor coverage
diameter to height ratio
ZCWM05GIV1 Ceiling Mount Array (360° Wall or ceiling mount for ZRE200BP
Fresnel
Technologies
Inc.
Lens
Specification –
see page 14
oval pattern)
office or meeting room
ZSBG323671
•
Wall mount array
(~100°, ~8m coverage)
Circular lens with
24mm x 24mm square
base
•
Room Lighting and
HVAC Control
CWM 0.5 GI
V1
•
•
•
14.2mm focal length
Board mount clip-in
ZEWA03GIV2 Extra Wide Angle Wall
Room occupancy and
proximity sensing
ZRE200BP
Fresnel
Technologies
Inc.
Lens
Mount Array (180°)
ZSBG323671
Specification –
see page 17
•
•
•
•
14mm x 28mm
7.6mm focal length
5 meter range
180° detection with a
single pyro
EWA 0.3 GI V2
•
•
•
Wall mount room
lighting control
AC light switch
replacement
Hotel room thermostats
16 equal segments
ZNCL3B Lens 10mm wall mount array
Proximity or Entrance
Detection
ZRE200BP
Nippon
Ceramic Co.,
Ltd. (Nicera)
Specification –
see page 18
(60° x 60°)
ZSBG323671
•
•
•
•
•
Kiosk
Vending
HVAC
Display counters
Under-cabinet Lighting
•
•
•
Clips on to pyroelectric
sensor
NCL-3B
2 beams (X); 2 beams
(Y)
10m range
ZNCL10R
Lens
Specification –
see page 21
10mm Ceiling Mount
Proximity or Entrance
Detection
ZSBG446671
ZRE200BP
Nippon
Ceramic Co.,
Ltd. (Nicera)
•
•
Array (90° x 77°)
Clips on to pyroelectric
sensor
•
•
•
HVAC
Display counters
Lighting Controls
ZSBG323671
NCL-10R
PS028610-1114
ZMOTION Lens Selection Guide
ZMOTION® Lenses
Product Specification
4
Table 1. ZMOTION Detection and Control Lenses (Continued)
Recommended Manufacturer
Recommended
Applications
Pyroelectric
Sensor(s)
and MFR Part
Number
Part Number Description
ZNCL926 Lens Clip-on 15mm Array
Specification – (360°)
Room Occupancy and
Proximity Sensing
ZRE200BP
Nippon
Ceramic Co.,
Ltd. (Nicera)
ZSBG323671
ZSBG446671
see page 25
•
•
•
Clips on to pyroelectric
sensor
•
•
•
•
•
Lighting Control
HVAC Control
Appliance
Kiosk/Display Control
Vending Power
Management
NCL-9(26)
2.5m radius at 2.5m
height
2:1 Floor coverage
diameter to height ratio
•
•
Appliance
Power Management
ZNCL10IL
Lens
Specification –
see page 28
10mm Wall/Ceiling Mount Proximity or Entrance
Array (80° x 30°) Detection
ZRE200BP
Nippon
Ceramic Co.,
Ltd. (Nicera)
ZSBG323671
•
•
•
Clips on to pyroelectric
sensor
6 beams (X); 2 beams
(Y)
•
•
•
•
Kiosk
Vending
HVAC
Display counters
NCL-10IL
10m range
ZNCL10S
Lens
Specification –
see page 33
10mm wall mount (27°)
directional
Entrance detection
Kiosk
ZRE200BP
Nippon
Ceramic Co.,
Ltd. (Nicera)
ZSBG323671
•
•
•
Clips on to pyroelectric
sensor
2 beams (X), 1 beam
(Y)
Vending
NCL-10S
HVAC
Display counters
Directional Detection
10m range
ZNCL11 Lens Wall mount array 104°
Specification – (X), 37° (Y)
Room occupancy and
proximity sensing
ZRE200BP
Nippon
Ceramic Co.,
Ltd. (Nicera)
ZSBG323671
see page 35
•
•
32 detection zones
Circuit board mount,
black rectangular lens
4m range
•
Consumer electronics
and appliance power
management
NCL-11
•
•
Display power
management
•
•
TV auto shutoff
Keypad motion
detector
PS028610-1114
ZMOTION Lens Selection Guide
ZMOTION® Lenses
Product Specification
5
Table 2. ZMOTION Intrusion Detection Lenses
Configuration
Pyroelectric
Sensor
Part Number Description
Typical Applications
Header File
ZLR12GI12V3 Long Range Array
Wall-mount long range
corridor/hallway security/
intrusion motion detector
ZRE200BP
Fresnel
Technologies
Inc.
Lens
Specification –
see page 38
42.6mm x 61.0mm Flat
Fresnel
ZSBG446671
LR 1.2 GI 12
V3
30.5mm (1.2ʺ) focal
length
30.5m (100') range
3:1 floor coverage
diameter to height ratio
ZVB12GIV1
Lens
Specification –
see page 39
Vertical Barrier Array
Wall- or ceiling-mount
curtain or vertical barrier
security/intrusion motion
detector
ZRE200BP
Fresnel
Technologies
Inc.
42.6mm x 61.0mm Flat
Fresnel
ZSBG446671
VB 1.2 GI V1
30.5mm (1.2ʺ) focal
length
15 meter range, horizontal
7m range, vertical
ZWA12GI12V4 Wide Angle Array (88°)
Corner/Wall Mount
security/intrusion motion
detector
ZRE200BP
Fresnel
Technologies
Inc.
Lens
Specification –
see page 40
42.6mm x 61.0mm Flat
Fresnel
ZSBG446671
•
•
Pet immunity detector
Wide-area security
motion detector
WA 1.2 GI 12
V4
30.5mm (1.2ʺ) focal
length
18 meter range
ZMOTION Detection and Control Lens Specifications
Figures 1 through 27 on the following pages discuss the specifications of the lenses
selected for the ZMOTION Detection and Control family of products. To see specifica-
tions for lenses used in security and intrusion detection applications, refer to the ZMO-
TION Intrusion Detection Lens Specifications section on page 37.
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
6
ZAA09GIT1 Lens Specification
The ZAA09GIT1 lens array is optimized for dual-element pyroelectric sensors in long
range sensing applications. It is normally used with the grooved side facing the pyroelec-
tric detector, and curved at a 0.9 inch (22.9mm) radius about the sensitive area of the
detector. The detector position should be 0.492" (12.5mm) below the upper edge, and cen-
tered left-right.
FRONT VIEW:
49.9mm
(1.965in)
TOP VIEW:
15 m
(45ft)
12.5mm
(.492in)
0
88°
15 m
(45ft)
SIDE VIEW:
2.1m
(6.8ft)
15m
(45ft)
Figure 1. The ZAA09GIT1 Lens Specification
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
7
ZCM077GIV2 Lens Specification
The ZCM077GIV2 lens is intended for high ceiling-mounted commercial lighting and HVAC
applications in which high floor coverage is required. See Figures 2 and 3.
Detector Position
11.7mm
Grooved Side
(0.46in)
19.6mm
(0.77in)
15°
Notch Radius 1.5mm (0.060in)
Inactive Area
TOP VIEW:
9.1m
(30ft)
52.5mm
(2.066in)
C
L
6.1m
(20ft)
7.8mm
(0.3in)
3.0m
(10ft)
C
L
0
C
L
3.0m
(10ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
6.1m
(20ft)
9.1m
(30ft)
SIDE VIEW:
0
8ft
(2.4m)
0
2.4m
(8ft)
2.4m
(8ft)
7.3m
(24ft)
4.3m
(14ft)
0.9m
(3ft)
0.9m
(3ft)
4.3m
(14ft)
7.3m
(24ft)
Figure 2. The ZCM077GIV2 Lens Specification: Front View
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
8
9.1m
(30ft)
C
L
6.1m
(20ft)
3.0m
(10ft)
0
C
L
3.0m
(10ft)
6.1m
(20ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
9.1m
(30ft)
(For mounting height of 2.4m (8ft))
SIDE VIEW:
0
8ft
(2.4m)
10ft
(3.0m)
12ft
(3.7m)
12.2m
(40ft)
9.1m
(30ft)
6.1m
(20ft)
3.0m
(10ft)
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
12.2m
(40ft)
0
Figure 3. The ZCM077GIV2 Lens Specification: Floor Coverage, Side View
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
9
ZCM077GIV3 Lens Specification
The ZCM077GIV3 lens array is intended for ceiling-mounted applications and is opti-
mized for use with both dual and quad element pyroelectric sensors. The detector mount-
ing flange should be 0.46" (11.7 mm) from the pyroelectric sensor’s element. The angle
from the center line to the placement notch is 15 degrees.
FRONT VIEW :
Detector Position
11.7mm
Grooved Side
(0.46in)
19.6mm
(0.77in)
Notch Radius 1.5mm (0.060in)
TOP VIEW:
4.6m
(15ft)
C
L
52.5mm
(2.066in)
3.0m
(10ft)
7.8mm
(0.3in)
1.5m
(5ft)
C
L
0
C
L
1.5m
(5ft)
3.0m
(10ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
4.6m
(15ft)
SIDE VIEW:
0
8ft
(2.4m)
3.7m
(12ft)
2.7m 2.1m 1.5m 0.9m
(9ft) (7ft) (5ft) (3ft)
0.9m 1.5m 2.1m 2.7m
(3ft) (5ft) (7ft) (9ft)
3.7m
(12ft)
0
Figure 4. The ZCM077GIV3 Lens Specification, #1 of 2
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
10
FLOOR
COVERAGE:
(For mounting height of 2.4m (8ft))
4.6m
(15ft)
C
L
3.0m
(10ft)
1.5m
(5ft)
0
C
L
1.5m
(5ft)
3.0m
(10ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
4.6m
(15ft)
SIDE VIEW:
0
8ft
(2.4m)
10ft
(3.0m)
12ft
(3.7m)
6.1m
(20ft)
4.6m
(15ft)
3.0m
(10ft)
1.5m
(5ft)
1.5m
(5ft)
3.0m
(10ft)
4.6m
(15ft)
6.1m
(20ft)
0
Figure 5. The ZCM077GIV3 Lens Specification, #2 of 2
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
11
ZCM077GIV5 Lens Specification
The ZCM077GIV5 lens array is intended for ceiling-mounted applications and is opti-
mized for both dual and quad element pyroelectric detectors. The detector mounting
flange should be 0.46" (11.7 mm) from the pyroelectric sensor’s element.
FRONT VIEW :
Detector Position
11.68mm
Grooved Side
(0.46in)
19.56mm
(0.77in)
15°
Notch Radius 1.52mm (0.060in)
TOP VIEW:
4.6m
(15ft)
C
L
52.5mm
(2.066in)
3.0m
(10ft)
7.82mm
(0.308in)
1.5m
(5ft)
C
L
0
C
L
1.5m
(5ft)
3.0m
(10ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
4.6m
(15ft)
SIDE VIEW:
0
8ft
3.7m
(12ft)
2.7m 2.1m 1.5m 0.9m
(9ft) (7ft) (5ft) (3ft)
0.9m 1.5m 2.1m 2.7m
(3ft) (5ft) (7ft) (9ft)
3.7m
(12ft)
0
Figure 6. The ZCM077GIV5 Lens Specification, #1 of 3
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
12
FLOOR
COVERAGE:
(For mounting height of 12.2m (30ft))
C
L
12.2m
(40ft)
(30ft)
9.1m
6.1m
(20ft)
(10ft)
3.0m
0
C
L
3.0m
(10ft)
(20ft)
6.1m
9.1m
(30ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
(40ft)
12.2m
SIDE VIEW:
0
(20ft)
6.1m
9.1m
(30ft)
(40ft)
12.2m
12.2m
(40ft)
9.1m
(30ft)
6.1m
(20ft)
3.0m
(10ft)
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
12.2m
(40ft)
0
Figure 7. The ZCM077GIV5 Lens Specification, #2 of 3
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
13
FLOOR
COVERAGE:
(For mounting height of 12.2m (30ft),
and when a 4 element is used )
C
L
12.2m
(40ft)
(30ft)
9.1m
6.1m
(20ft)
(10ft)
3.0m
0
C
L
3.0m
(10ft)
(20ft)
6.1m
9.1m
(30ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
(40ft)
12.2m
SIDE VIEW:
0
(20ft)
6.1m
9.1m
(30ft)
(40ft)
12.2m
12.2m
(40ft)
9.1m
(30ft)
6.1m
(20ft)
3.0m
(10ft)
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
12.2m
(40ft)
0
Figure 8. The ZCM077GIV5 Lens Specification, #3 of 3
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
14
ZCWM05GIV1 Lens Specification
The CWM 0.5 GI V1 lens array is intended for both wall and ceiling-mounted applications
and is optimized for both dual and quad element pyroelectric detectors. The lens is
intended to clip directly into the circuit board over top of the pyroelectric sensor.
FRONT VIEW:
TOP VIEW:
1mm R
(0.04in)
9.1m
(30ft)
24mm
(0.94in)
2mm R
(0.08in)
24mm
(0.94in)
4.6m
(15ft)
5.2mm
(0.2in)
TOP VIEW:
14.2mm
(0.56in)
180°
0m
12mm
(0.47in)
CLIP DETAILS:
4.6m
(15ft)
(Scale 10:1)
2.5mm
(0.1in)
1.7mm
(0.065in)
9.1m
(30ft)
SIDE VIEW:
1.2m
(4ft)
0m
2.4m
(8ft)
4.3m
(14ft)
9.1m
(30ft)
Figure 9. The ZCWM05GIV1 Lens Specification: Wall Mount
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
15
FRONT VIEW :
5.2mm
(0.2in)
14.2mm
(0.56in)
12mm
(0.47in)
TOP VIEW:
4.6m
(15ft)
1mm R
(0.04in)
C
L
24mm
(0.94in)
3.0m
(10ft)
2mm R
(0.08in)
24mm
(0.94in)
1.5m
(5ft)
0
C
L
1.5m
(5ft)
CLIP DETAILS:
(Scale 10:1)
2.5mm
(0.1in)
3.0m
(10ft)
1.7mm
(0.065in)
4.6m
(15ft)
SIDE VIEW:
0
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
8ft
3.7m
(12ft)
2.7m 2.1m 1.5m 0.9m
(9ft) (7ft) (5ft) (3ft)
0.9m 1.5m 2.1m 2.7m
(3ft) (5ft) (7ft) (9ft)
3.7m
(12ft)
0
Figure 10. The ZCWM05GIV1 Lens Specification: Ceiling Mount, #1 of 2
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
16
FLOOR
COVERAGE:
(For mounting height of 7.62m (25ft))
9.1m
(30ft)
C
L
6.1m
(20ft)
3.0m
(10ft)
0
C
L
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
Note: The "beam" pattern
obtained depends strongly
on the detector used with
this array. The pattern
shown is intended solely
as a general guide.
SIDE VIEW:
0
(15ft)
4.6 m
(25ft)
7.6 m
9.1m
(30ft)
6.1m
(20ft)
3.0m
(10ft)
3.0m
(10ft)
6.1m
(20ft)
9.1m
(30ft)
0
Figure 11. The ZCWM05GIV1 Lens Specification: Ceiling Mount, #2 of 2
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
17
ZEWA03GIV2 Lens Specification
The ZEWA03GIV2 lens is intended for wall-mounted room occupancy and proximity sens-
ing applications in which an extra-wide sensing angle is required. See Figure 12.
Sensitive
Element
1.0"
(25.4mm)
.30"
(7.6mm)
4.6 m
28.4mm
(1.12in)
22.4mm
(0.88in)
7.6mm
(0.3in)
13.8mm
(0.54in)
0.07"
0.08"
0.09"
0.2"
TOP VIEW:
ACTUAL SIZE
4.6 m
SIDE VIEW:
4.6m
Figure 12. The ZEWA03GIV2 Lens Specification, Dimensions
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
18
ZNCL3B Lens Specification
The ZNCL3B lens is intended for wall-mounted entrance and proximity-sensing applica-
tions.
Figure 13. The ZNCL3B Lens Dimensions
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
19
Figure 14. The ZNCL3B Lens Specification, X Axis
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
20
Figure 15. The ZNCL3B Lens Specification, Y Axis
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
21
ZNCL10R Lens Specification
The ZNCL10R lens is intended for ceiling-mounted entrance and proximity-sensing appli-
cations. This lens features two orientations, Tab A and Tab B, that can be used with the
pyroelectric sensor to provide different beam patterns. Figures 16 through 19.
',0(16,21
81,7 >PP@
ꢃꢁꢅꢈ
ꢂꢁꢀꢈ
*$7(
/(16 ȭꢉꢁꢊ
7H[WXUHG SDUW
ꢋDURXQG WKH FLUFOHꢌ
࠙723 9,(:
ࠚ
$
$ꢍ
ꢆꢇ5ꢈꢁꢉ
ꢅꢁꢂ
*DWH SDUWꢏ
UHVLGXDO RI FXWWLQJ ꢐ 0D[ꢁꢂꢁꢈ
࠙$ꢇ$ꢍ
ࠚ
ꢃꢁꢃ
࠙%27720 9,(:
ࠚ
ꢋꢉꢁꢄꢌ
ꢋꢎꢁꢅꢈꢌ
$
$ꢍ
ꢂ
ꢁ
ꢊ
72/(5$1&( :,7+287 ,16758&7,21㸸 ꢀꢁꢂꢃꢄ ꢅꢆꢇ
ꢄ
ꢁ
ꢄ
5ꢂꢁꢅ
Figure 16. The ZNCL10R Lens Specification, Dimensions
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
22
),(/' 2) 9,(:
ꢀꢈꢄ'8$/ 7<3( ꢀ(/(0(17 6,=( ꢉꢆꢅꢀ;ꢄ ꢇꢆꢅꢀ<ꢄ *DSꢉꢆꢅPPꢄ
7$% GLUHFWLRQ $
<
;ꢍ
;
$
;
<ꢍ
%
<
ꢉP
ꢋꢃꢂꢁꢃꢃꢌ
ꢊ
<
ꢈ
ꢄ
ꢈP
ꢆꢁꢈP
ꢃ
;
ꢉP
ꢉP
ꢊ
ꢄ
ꢂ
ꢃ
ꢅ
ꢈ
ꢅ
ꢄ
ꢊ
ꢆ
ꢅ
ꢄ
ꢈ
ꢊ
ꢆꢁꢈP
ꢈP
ꢈP
ꢉP
ꢈꢊ =21(6 '8$/ (/(0(17 ꢉꢋ $5($6
Figure 17. The ZNCL10R Dual-Element Lens Specification, Tab Direction A
81,7 >P@
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
23
),(/' 2) 9,(:
ꢀꢈꢄ'8$/ 7<3( ꢀ(/(0(17 6,=( ꢉꢆꢅꢀ;ꢄ ꢇꢆꢅꢀ<ꢄ *DSꢉꢆꢅPPꢄ
7$% GLUHFWLRQ %
$
<
;ꢍ
;
%
;
<ꢍ
<
ꢉP
ꢋꢀꢁꢃꢎꢌ
ꢊ
<
ꢈ
ꢄ
ꢈP
ꢅ
ꢆ
ꢆꢁꢈP
ꢃ
;
ꢉP
ꢉP
ꢊ
ꢈ
ꢄ
ꢆ
ꢂ
ꢃ
ꢅ
ꢈ
ꢅ
ꢆ
ꢄ
ꢊ
ꢆ
ꢅ
ꢄ
ꢈ
ꢊ
ꢆꢁꢈP
ꢈP
ꢈP
ꢉP
81,7 >P@
ꢈꢊ =21(6 '8$/ (/(0(17 ꢉꢋ $5($6
Figure 18. The ZNCL10R Dual-Element Lens Specification, Tab Direction B
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
24
Figure 19. The ZNCL10R Quad-Element Lens Specification, Tab Direction A, X Axis
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
25
ZNCL926 Lens Specification
The ZNCL926 lens is intended for ceiling-mounted and other general purpose motion
sensing applications. It is optimized for both dual and quad element pyroelectric sensors.
Tolerance : (+/-) 0.2
Unit [ mm ]
Figure 20. The ZNCL926 Lens Specification, Dimensions
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
26
Sensor: Pyroelectric Infrared Sensor, 4 Element Type (one output)
Element Size: 1.0mm (X) x 1.0mm (Y) x Gap 1.0mm
Unit [ m ]
Figure 21. The ZNCL926 Detection Area with Quad-Element PIR
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
27
Sensor: Pyroelectric Infrared Sensor, Dual-Element Type
Element Size: 2.0mm (X) x 1.0mm (Y) x Gap 1.0mm
Unit [ m ]
Figure 22. The ZNCL926 Detection Area with Dual-Element PIR
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
28
ZNCL10IL Lens Specification
The ZNCL10IL lens is intended for wall-mounted entrance and proximity-sensing appli-
cations. This lens features two orientations, Tab A and Tab B, that can be used with the
pyroelectric sensor to provide different beam patterns. Refer to Figures 24 and 25 for the
Tab A beam patterns and to Figures 26 and 27 for the Tab B beam patterns.
Figure 23. The ZNCL10IL Lens Specification, Dimensions
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
29
Figure 24. The ZNCL10IL Lens Specification, Tab Direction A, X Axis
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
30
Figure 25. The ZNCL10IL Lens Specification, Tab Direction A, Y Axis
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
31
Figure 26. The ZNCL10IL Lens Specification, Tab Direction B, X Axis
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
32
Figure 27. The ZNCL10IL Lens Specification, Tab Direction B, Y Axis
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
33
ZNCL10S Lens Specification
The ZNCL10S lens is intended for wall-mounted entrance detection applications wherein
directional recognition is required. See Figures 28 and 29.
Figure 28. The ZNCL10S Lens Specification, Dimensions
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
34
Figure 29. The ZNCL10S Dual-Element Lens Specification, X/Y Axes
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
35
ZNCL11 Lens Specification
The ZNCL11 lens is intended for wall-mounted room occupancy and proximity sensing
applications with 32 detection zones. See Figures 30 and 31.
Figure 30. The ZNCL11 Lens Specification, Dimensions
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
36
Figure 31. The ZNCL11 Detection Area, X/Y Axes
PS028610-1114
ZMOTION Detection and Control Lens Specifications
ZMOTION® Lenses
Product Specification
37
ZMOTION Intrusion Detection Lens Specifications
Figures 32 through 34 provide the zone patterns and mechanical dimensions for the ZMO-
TION Intrusion Detection family of products. Recommended placement of the pyroelectric
sensor is provided with the detector and lens inclined downward at an angle of 12 degrees.
If you wish to use a tilt angle other than 12 degrees while maintaining the specified zone
patterns, move the pyroelectric sensor up by 0.021" (0.53mm) for each degree less than 12
degrees, or down by the same amount for each degree greater than 12 degrees.
The ZLR12GI12V3, ZVB12GIV1, and ZWA12GI12V4 lenses can be interchanged in the
same end product without modifications to the placement or angle of the lens.
These lenses may also be used in nonintrusion applications. For additional lenses that do
not require security/intrusion detection capabilities, refer to the ZMOTION Detection and
Control Lens Specifications section on page 5.
PS028610-1114
ZMOTION Intrusion Detection Lens Specifications
ZMOTION® Lenses
Product Specification
38
ZLR12GI12V3 Lens Specification
The ZLR12GI12V3 lens array is optimized for dual-element pyroelectric sensors in long-
range corridor security applications. It is normally used with the grooved side facing the
pyroelectric detector, and curved at a 1.2 inch (30.5mm) radius about the sensitive area of
the detector. The detector and the lens array should be inclined downward at an angle of
12 degrees. If you wish to use a tilt angle other than 12 degrees while maintaining the
specified zone pattern, move the pyroelectric sensor up by 0.021" (0.53mm) for each
degree less than 12 degrees, or down by the same amount for each degree greater than 12
degrees. The detector position should be 0.812" (20.6 mm) below the upper edge, and cen-
tered left-to-right.
FRONT VIEW:
20.6mm
(0.81in)
42.6mm
(1.675in)
61mm
(2.4in)
TOP VIEW:
77°
5m
(16ft)
21.5°
14°
2.5m
(8ft)
29°
6.5°
C
0
L
2.5m
(8ft)
5.0m
(16ft)
SIDE VIEW:
2.1m
(6.8ft)
1m
2.2m
(7ft)
3m
10.7m
(35ft)
18.3m
(60ft)
30.5m
(100ft)
(3ft)
(10ft)
Figure 32. ZLR12GI12V3 Lens Specification
PS028610-1114
ZMOTION Intrusion Detection Lens Specifications
ZMOTION® Lenses
Product Specification
39
ZVB12GIV1 Lens Specification
The ZVB12GIV1 lens array is optimized for dual-element pyroelectric sensors in vertical
barrier or curtain-type security applications. It is normally used with the grooved side fac-
ing the pyroelectric detector, and curved at a 1.2 inch (30.5 mm) radius about the sensitive
area of the detector. The detector and the lens array should be inclined downward at an
angle of 12 degrees. If you wish to use a tilt angle other than 12 degrees while maintaining
the specified zone pattern, move the pyroelectric sensor up by 0.021" (0.53mm) for each
degree less than 12 degrees, or down by the same amount for each degree greater than 12
degrees. The detector position should be 0.812" (20.6 mm) below the upper edge, and cen-
tered left-to-right.
Figure 33. ZVB12GIV1 Lens Specification
PS028610-1114
ZMOTION Intrusion Detection Lens Specifications
ZMOTION® Lenses
Product Specification
40
ZWA12GI12V4 Lens Specification
The ZWA12GI12V4 lens array is optimized for dual-element pyroelectric sensors in large-
area security applications. It is normally used with the grooved side facing the pyroelectric
detector, and curved at a 1.2 inch (30.5mm) radius about the sensitive area of the detector.
The detector and the lens array should be inclined downward at an angle of 12 degrees. If
you wish to use a tilt angle other than 12 degrees while maintaining the specified zone pat-
tern, move the pyroelectric sensor up by 0.021" (0.53mm) for each degree less than 12
degrees, or down by the same amount for each degree greater than 12 degrees. The detec-
tor position should be 0.812" (20.6mm) below the upper edge, and centered left-to-right.
FRONT VIEW:
20.6mm
(0.81in)
42.6mm
(1.675in)
TOP VIEW:
61mm
(2.4in)
10m
(33ft)
5m
(16ft)
0
88.2°
5m
(16ft)
10m
(33ft)
SIDE VIEW:
2.1m
(6.8ft)
18m
15.6m
(51ft) (60ft)
1.7m 3.7m
7m
(12ft)
(23ft)
(6ft)
Figure 34. ZWA12GI12V4 Lens Specification
PS028610-1114
ZMOTION Intrusion Detection Lens Specifications
ZMOTION® Lenses
Product Specification
41
Related Documents
Additional information about the ZMOTION Families of Motion Detection MCUs can be
found in the following documents, which are available from the Zilog website.
Document
Number
PB0225
PB0230
PS0228
PS0285
PS0288
PS0336
AN0307
AN0309
WP0017
WP0018
Description
ZMOTION Detection and Control Family Product Brief
ZMOTION Intrusion Detection Product Brief
®
Z8 Encore! XP F082A Series Product Specification
ZMOTION Detection and Control Family Product Specification
ZMOTION Intrusion Detection Product Specification
ZMOTION Pyroelectric Sensors Specification
ZMOTION Detection Module Application Walkthrough
ZMOTION High Brightness White LED Lighting Application Note
A New PIR Motion Detection Architecture White Paper
ZMOTION Detection Lens and Pyro Sensor Configuration Guide
Other ZMOTION Family Products
PB0244
PS0305
ZMOTION Detection Module II Product Brief
ZMOTION Detection Module II Product Specification
PS028610-1114
Related Documents
ZMOTION® Lenses
Product Specification
42
Customer Support
To share comments, get your technical questions answered, or report issues you may be
experiencing with our products, please visit Zilog’s Technical Support page at
http://support.zilog.com.
To learn more about this product, find additional documentation, or to discover other fac-
ets about Zilog product offerings, please visit the Zilog Knowledge Base at http://
zilog.com/kb or consider participating in the Zilog Forum at http://zilog.com/forum.
This publication is subject to replacement by a later edition. To determine whether a later
edition exists, please visit the Zilog website at http://www.zilog.com.
PS028610-1114
Customer Support
相关型号:
ZNDC-13-2G-S
Directional Coupler, 800MHz Min, 2000MHz Max, 1.3dB Insertion Loss-Max, CASE FM587
MINI
ZNDC-13-2G-S+
Directional Coupler, 800MHz Min, 2000MHz Max, 1.3dB Insertion Loss-Max, ROHS COMPLIANT, CASE FM587
MINI
ZNDC-18-2G+
Directional Coupler, 800MHz Min, 2000MHz Max, 1.1dB Insertion Loss-Max, ROHS COMPLIANT, CASE FM587
MINI
ZNDC-18-2G-S
Directional Coupler, 800MHz Min, 2000MHz Max, 1.1dB Insertion Loss-Max, CASE FM587
MINI
ZNDC-18-2G-S+
Directional Coupler, 800MHz Min, 2000MHz Max, 1.1dB Insertion Loss-Max, ROHS COMPLIANT, CASE FM587
MINI
ZNDC-20-2G-S
Directional Coupler, 800MHz Min, 2000MHz Max, 1.1dB Insertion Loss-Max, CASE FM587
MINI
©2020 ICPDF网 联系我们和版权申明