AZ2280-1AT-120AF [ZETTLER]
30 AMP MINIATURE POWER RELAY;
| 型号： | AZ2280-1AT-120AF |
| 厂家： | 
ZETTLER ELECTRONICS |
| 描述： | 30 AMP MINIATURE POWER RELAY 继电器 |
| 文件： | 总3页 (文件大小：48K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
AZ2280
30 AMP MINIATURE
POWER RELAY
FEATURES
• Quick-connect leads for contacts and coil
• 1 Form A, B and C contacts available
• AC and DC coils available
• Epoxy sealed versions available
• UL Class F (155°C) standard
• UL, CUR file E44211
• VDE certificate 40027037
CONTACTS
GENERAL DATA
Arrangement SPST (1 Form A)
SPST (1 Form B)
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 30 A 120 VAC Res. N.O.
SPDT (1 Form C)
Ratings
1 Form A
Resistive load:
Operate Time
Release Time
15 ms max. at nominal coil voltage
10 ms max. at nominal coil voltage
(with no coil suppression)
Max. switched power: 840 W or 8310 VA
Max. switched current: 30 A
Max. switched voltage: 28 VDC or 277 VAC
Dielectric Strength
2500 Vrms coil to contact
(at sea level for 1 min.)
1500 Vrms between open contacts
1 Form B
1 Form C
Max. switched power: 280 W or 4155VA
Max. switched current: 15 A
Max. switched voltage: 28 VDC or 277 VAC
Insulation Resistance
Dropout
1000 megaohms min. at 20°C,
500 VDC 50% RH
DC: > 10% of nominal coil voltage
AC: > 20% of nominal coil voltage
Max. switched power: 560 W or 8310 VA (N.O.)
280 W or 5540 VA (N.C.)
Max. switched current: 30 A (N.O.)
20 A (N.C.)
Max. switched voltage: 28 VDC or 277 VAC
Ambient Temperature
Operating
-40°C (-40°F) to 85°C (185°F), DC coils
-40°C (-40°F) to 70°C (158°F), AC coils
Material
Silver cadmium oxide [1], silver tin oxide [2]
Vibration
Shock
1.5 mm DA at 10-55 Hz
10 g
Resistance
< 50 milliohm initially
(24 V, 1A voltage drop method)
Enclosure
Terminals
P.B.T. polyester
Tinned copper alloy, Quick Connects
COIL
Power
Note: Allow suitable slack on leads when
wiring, and do not subject the terminals
to excessive force.
At Pickup Voltage
(typical)
500 mW, DC coil
1.4 VA, AC coil
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
270°C (518°F)
5 seconds
Max. Continuous
Dissipation
1.7 W at 20°C (68°F) ambient, DC coil
2.7 VA at 20°C (68°F) ambient, AC coil
80°C (176°F)
Temperature Rise
Max. Temperature
38°C (68°F) at nominal coil voltage
155°C (311°F)
30 seconds
36 grams
Packing unit in pcs
40 per plastic tray / 240 per carton
NOTES
1. All values at 20°C (68°F)
2. Relay may pull in with less than “Must Operate” value.
3. AC coils are not VDE approved
4. 18 VDC coil is not VDE approved.
5. Specification subject to change without notice.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
fax:
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
AZ2280
CONTACTS
Rated load
Rated load
VDE
UL
1 Form A
1 Form A, DC coils only
30 A at 250 VAC, resistive, 30k cycles [1]
15 A at 250 VAC, cos phi = 0.4, 100k cycles [1][2]
30 A at 277 VAC, General Use, 6k cycles [1][2]
30 A at 28 VDC, resistive, 6k cycles [1]
28 A at 277 VAC, General Use, 100k cycles [1]
20 FLA / 60 LRA at 277 VAC, 30k cycles [1]
2 HP at 250 VAC [1][2]
1 Form B, DC coils only
15 A at 250 VAC, resistive, 30k cycles [1]
1 HP at 125 VAC [1][2]
1 Form C, (N.O.), DC coils only
30 A at 250 VAC, resistive, 30k cycles [1]
20 A at 250 VAC, resistive, 100k cycles [2]
1 Form B
15 A at 277 VAC, General Use, 6k cycles [1]
10 A at 28 VDC, resistive, 6k cycles [1]
10 FLA / 33 LRA at 277 VAC, 30k cycles [1]
0.5 HP at 250VAC [1]
1 Form C, (N.C.), DC coils only
15 A at 250 VAC, resistive, 30k cycles [1]
10 A at 250 VAC, resistive, 100k cycles [2]
0.25 HP at 125 VAC [1]
1 Form C, (N.O.)
Note: 18 VDC coil is not VDE approved.
AC coils are not VDE approved.
30 A at 277 VAC, General Use, 6k cycles [1][2]
20 A at 277 VAC, General Use, 6k cycles [1]
20 A at 28 VDC, resistive, 6k cycles [1]
20 FLA / 60 LRA at 277 VAC, 30k cycles [1]
2 HP at 250 VAC [1][2]
1 HP at 125 VAC [1][2]
1 Form C, (N.C.)
20 A at 277 VAC, General Use, 6k cycles [1][2]
10 A at 28 VDC, resistive, 6k cycles [1]
10 FLA / 33 LRA at 277 VAC, 30k cycles [1]
0.5 HP at 250 VAC [1][2]
0.25 HP at 125 VAC [1][2]
RELAY ORDERING DATA
COIL SPECIFICATIONS – DC Coil
ORDER NUMBER*
Coil Resistance
Ohm ± 10%
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Nominal Current
mA ± 10%
5
6
3.75
4.5
6.4
7.8
185
150
93
27
40
AZ2280-1AT-5DF
AZ2280-1AT-6DF
AZ2280-1AT-9DF
AZ2280-1AT-12DF
AZ2280-1AT-15DF
AZ2280-1AT-18DF
AZ2280-1AT-24DF
AZ2280-1AT-48DF
9
6.75
9.0
12.2
15.4
19.8
24.1
32.0
62.6
97
12
15
18
24
48
77
155
256
380
660
2,560
11.25
13.5
18.0
36.0
59
47
36
19
COIL SPECIFICATIONS – AC Coil 50/60 Hz
ORDER NUMBER*
Nominal Coil
VDC
Must Operate
VDC
Max. Continuous
VDC
Nominal Coil
Power VA
Coil Resistance
Ohm ± 10%
12
24
9.6
19.2
13.8
27.6
2.3
2.1
2.3
2.2
2.6
2.2
25
100
AZ2280-1AT-12AF
AZ2280-1AT-24AF
AZ2280-1AT-120AF
AZ2280-1AT-220AF
AZ2280-1AT-240AF
AZ2280-1AT-277AF
120
220
240
277
96.0
138.0
286.0
286.0
318.5
2,500
13,490
13,490
15,000
176.0
192.0
220.0
* “1AT” denote silver cadmium oxide contacts.
Substitute “1BT” in place of “1AT” for 1 Form B relay.
Substitute “1CT” in place of “1AT” for 1 Form C relay.
Substitute “1AET” or “1CET” in place of “1AT” or “1CT” for silver tin oxide contacts.
Substitute “DEF” or “AEF” for epoxy sealed version.
Add suffix “K ”at the end of order number for 0.11 x 0.02 [2.8 x 0.5] coil terminals.
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax: +49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
AZ2280
MECHANICAL DATA
1.08
(27.5)
1.09
(27.8)
3 x 0.25 x 0.032
[6.3 x 0.8]
1.27
(32.4)
1.98
(50.2)
1.71
(43.5)
2 x 0.187 x 0.02*
[4.8 x 0.5]
0.14
(3.5)
* "K" = 0.110 x .02 [2.8 x 0.5]
WIRING DIAGRAMS (Top View)
Form A
Form B
Form C
3
3
2
2
4
4
4
1
5
1
5
1
5
Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010"
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
-
A ZETTLER GROUP Company
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax: +49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
2014-09-08
相关型号：
©2020 ICPDF网 联系我们和版权申明