V330ME10-LF [ZCOMM]
VOLTAGE CONTROLLED OSCILLATOR; 压控振荡器
| 型号： | V330ME10-LF |
| 厂家： | 
Z-COMMUNICATIONS, INC |
| 描述： | VOLTAGE CONTROLLED OSCILLATOR |
| 文件： | 总2页 (文件大小：52K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
V330ME10-LF
9939 Via Pasar • San Diego, CA 92126
TEL (858) 621-2700 FAX (858) 621-2722
VOLTAGE CONTROLLED OSCILLATOR
Rev A1
PHASE NOISE (1 Hz BW, typical)
FEATURES
• Frequency Range:
• Tuning Voltage:
• MINI-16 - Style Package
305 -
MHz
345
0.5-4.5 Vdc
APPLICATIONS
• Satellite Modems
• Mobile Radios
OFFSET (Hz)
CATV
•
VALUE
UNITS
PERFORMANCE SPECIFICATIONS
Oscillation Frequency Range
Phase Noise @ 10 kHz offset (1 Hz BW, typ.)
Harmonic Suppression (2nd, typ.)
Tuning Voltage
-
305 345
MHz
dBc/Hz
dBc
-111
-10
0.5-4.5
21
Vdc
Tuning Sensitivity (avg.)
MHz/V
Power Output
6.5±3.5
50
dBm
Load Impedance
Input Capacitance (max.)
250
p
Pushing
<2
Mz/V
MHz
°C
Pulling (14 dB Return Loss, Any Phase)
<1
Operating Temperature Range
Package Style
-40 to 85
MINI-16
POWER SUPPLY REQUIREMENTS
Supply Voltage (Vcc, nom.)
Supply Current (Icc, typ.)
5
Vdc
mA
13
All specifications are typical unless otherwise noted and subject to change without notice.
APPLICATION NOTES
• AN-100/1 : Mounting and Grounding of VCOs
• AN-102 : Proper Output Loading of VCOs
• AN-107 : How to Solder Z-COMM VCOs
NOTES:
© Z-Communications, Inc.
Page 1
All rights reserved
LOW COST - HIGH PERFORMANCE
VOLTAGE CONTROLLED OSCILLATOR
V330ME10-LF
PAGE 2
TUNING CURVE, typ.
380
370
360
350
340
330
320
310
300
290
280
270
260
250
85 °c
°c
25
-40 °c
0
0.5
1
1.5
2
2.5
3
3.5
4
4.5
TUNING VOLTAGE (Vdc)
POWER CURVE, typ.
15
14
13
12
11
10
9
8
7
6
5
°c
25
4
3
2
1
0
259.1 278.66 294.9 308.03 320.06 330.73 341.31 351.38 360.61 369.74
FREQUENCY (MHz)
PHYSICAL DIMENSIONS
TYPICAL OF ALL PADS
SEE NOTE 3
MINI-16
415-0061 REV. D
(DRAWING NOT TO SCALE)
.070
.037
NOTES:
1. THE INSIDE RADIUS OF ALL 16 HALF HOLES
AT THE PERIMETER OF THE BOARD ARE
PLATED TO PROVIDE A SURFACE FOR THE
ATTACHMENT OF THE VCO TO A PCB,
.031
.026
.052
.114
IN 13 LOCATIONS, WITH 3 PADS BEING
USED FOR ELECTROMECHANICAL INTERFACE.
16 SOLDER LOCATIONS REQUIRED.
TABS RANGE:
SEE NOTE 5.
(4 PLACES)
0.500
0.475
2. THE SURFACE OF THE SHIELD IS TIN PLATED
AND MAY BE SOLDERED TO. THE SHIELD'S
BASE METAL IS COLD ROLLED STEEL.
3. THE GROUND PLANE IS GROUND AND ATTACHES
TO A GROUND TRACK ON THE UPPER SIDE OF
THE BOARD AS WELL AS THE SHIELD BY PTH.
4. UNLESS OTHERWISE NOTED ALL DIMENSIONS
ARE IN INCHES.
5. UNLESS OTHERWISE NOTED ALL TOLERANCES
ARE AS FOLLOWS:
DETAIL A
P2
0.415
0.315
0.405
0.305
0.205
0.105
P1=VT
P2=RF OUT
P3=Vcc
P3
0.215
0.115
TOLERANCES
.XXX= ± .010
BOTTOM VIEW
.220
SEE DETAIL 'A'
P1
.070 TYP
0.025
0.000
.034
0.000
.150
TYP
GROUND PLANE SOLDER PLATED
Page 2
© Z-Communications, Inc.
Printed in the U.S.A.
相关型号：
V330MT5B
Varistor, 274V, 1.1J, Through Hole Mount, AXIAL LEADED, HALOGEN FREE AND ROHS COMPLIANT
LITTELFUSE
©2020 ICPDF网 联系我们和版权申明