MF443PT [ZARLINK]
1310 nm, 1550 nm, 155 Mbps PIN with Preamplifier; 1310纳米, 1550纳米, 155 Mbps的PIN与前置放大器型号: | MF443PT |
厂家: | ZARLINK SEMICONDUCTOR INC |
描述: | 1310 nm, 1550 nm, 155 Mbps PIN with Preamplifier |
文件: | 总7页 (文件大小:341K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
This product is obsolete.
This information is available for your
convenience only.
For more information on
Zarlink’s obsolete products and
replacement product lists, please visit
http://products.zarlink.com/obsolete_products/
MF443
1310 nm, 1550 nm, 155 Mbps
PIN with Preamplifier
Data Sheet
January 2004
Ordering Information
MF443
TO-46 with lens
ST receptacle
MF443ST
MF443PT
Pigtail including 1.4 m of
50/125 mm multi-mode fiber
and SC connector
-40°C to +85°C
Note: The rated Responsivity applies to all options.
Features
Description
•
•
•
•
1310-1550 nm PIN/TIA
This device consists of a PIN photodiode and a
transimpedance amplifier assembled in
a TO-46
Data-rate up to 200 Mbps
TIA with AGC
Low power consumption
package. It is designed for FDDI, ATM and SDH/ Sonet
up to 155 Mbps. The AGC (Automatic Gain Control)
ensures a wide dynamic range. Its double-lens optical
system is designed for single-mode fiber as well as for
multimode fiber with core diameter up to 62.5 µm.
Applications
•
•
•
•
Sonet OC-3
FDDI
ATM 155 Mbps
General Purpose
Data Out
VDD
Data Out
V
Data Out
DD
Data Out
Case
V
SS
VSS
Bottom View
Figure 1 - Pin Diagram
Figure 2 - Functional Schematic
1
Zarlink Semiconductor Inc.
Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc.
Copyright 2004, Zarlink Semiconductor Inc. All Rights Reserved.
MF443
Data Sheet
Optical and Electrical Characteristics - Case Temperature 250C
Parameter
Symbol
Min.
Typ.
Max.
Unit
Test Condition
Responsivity, single
R
100
200
kV/W
λ = 1300 nm
Note 1
differential
Output Voltage
Vo
1.2
V
(differential, peak to peak)
Bandwidth (3 dBel)
Noise-Equivalent Power
Sensitivity (BER 10-9)
Dynamic Range
fc
NEP
S
140
15
MHz
nW
dBm
dB
Pf = 1 µW
λ = 1300 nm
-39
40
λ = 1300 nm
Extinction Ratio = 0
36
Output Resistance
(differential)
R0
50
Ω
Power Supply Current
IDD
32
40
mA
Operating Conditions: See table. Fiber: Single-mode to multimode 62.5/125 µm.
Note 1: Pf = 1 µW average power at 10 MHz/50% duty cycle.
Absolute Maximum Ratings
Parameter
Symbol
Min.
Max.
Unit
Supply voltage
V
DD-VSS
Top
0
6.0
+85
V
oC
oC
Operating Temperature
Storage Temperature
-40
-55
Tstg
+125
Recommended Operating Conditions
Parameter
Symbol
Min.
Typ.
Max.
5.2
Unit
Supply Voltage
VDD-VSS
RL
4.5
1
5.0
3
V
Output Differential Load
kΩ
Typical Responsivity
Core Diameter/Cladding Diameter Numerical Aperture
10/125 µm
50/125 µm
62.5/125 µm
0.11
0.20
0.275
Single
100 kV/W
200 kV/W
100 kV/W
200 kV/W
100 kV/W
200 kV/W
Differential
2
Zarlink Semiconductor Inc.
MF443
Data Sheet
r
100
80
60
40
20
0
z
r - optimal
Ø
= 62.5 µm
C
0.5
0.75
1
1.25
1.5
1.75
2
2.25
2.5
2.75
3
z - Axial Displacement of Fiber (nm)
Figure 3 - z - Axial Displacement of Fiber
r
100
80
60
40
20
0
z
z - optimal
= 62.5 µm
Ø
C
0
10
20
30
40
50
60
70
80
90
100
r - Radial Displacement of Fiber (mm)
Figure 4 - r - Radial Displacement of Fiber
3
Zarlink Semiconductor Inc.
MF443
Data Sheet
100
80
60
40
20
0
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
Wavelength (nm)
Figure 5 - Relative Responsivity vs. Wavelength
4
Zarlink Semiconductor Inc.
SIDE VIEW
BOTTOM VIEW ( 10 : 1 )
3,8
13,46`0,76
2,54
0,6
0,03
+
0,05
0
+
(4x)
n0,45
(3x)
n1,17
Brazed
-0,04
*
-
R2,7
45°
n1,02 max
0,33 max
Lens n1.5`0.05
NOTES:-
R0,4 max
1. All dimensions in mm.
2. General tol. ISO-2768-mK.
3. Coating:
Case: Ni 1,5-2,5 µm.
Header: Ni min 0,5 µm / Au min 1,5 µm.
* 0,25 max glass overmould (3x)
© Zarlink Semiconductor 2002. All rights reserved.
Package code
TB
ISSUE
ACN
1
Drawing type
Previous package codes
Package drawing, TO-46 with lens
JS004078R1A
22-MAR-03
DATE
Title
APPRD. TD/BE
JS004078
For more information about all Zarlink products
visit our Web Site at
www.zarlink.com
Information relating to products and services furnished herein by Zarlink Semiconductor Inc. or its subsidiaries (collectively “Zarlink”) is believed to be reliable.
However, Zarlink assumes no liability for errors that may appear in this publication, or for liability otherwise arising from the application or use of any such
information, product or service or for any infringement of patents or other intellectual property rights owned by third parties which may result from such application or
use. Neither the supply of such information or purchase of product or service conveys any license, either express or implied, under patents or other intellectual
property rights owned by Zarlink or licensed from third parties by Zarlink, whatsoever. Purchasers of products are also hereby notified that the use of product in
certain ways or in combination with Zarlink, or non-Zarlink furnished goods or services may infringe patents or other intellectual property rights owned by Zarlink.
This publication is issued to provide information only and (unless agreed by Zarlink in writing) may not be used, applied or reproduced for any purpose nor form part
of any order or contract nor to be regarded as a representation relating to the products or services concerned. The products, their specifications, services and other
information appearing in this publication are subject to change by Zarlink without notice. No warranty or guarantee express or implied is made regarding the
capability, performance or suitability of any product or service. Information concerning possible methods of use is provided as a guide only and does not constitute
any guarantee that such methods of use will be satisfactory in a specific piece of equipment. It is the user’s responsibility to fully determine the performance and
suitability of any equipment using such information and to ensure that any publication or data used is up to date and has not been superseded. Manufacturing does
not necessarily include testing of all functions or parameters. These products are not suitable for use in any medical products whose failure to perform may result in
significant injury or death to the user. All products and materials are sold and services provided subject to Zarlink’s conditions of sale which are available on request.
Purchase of Zarlink’s I2C components conveys a licence under the Philips I2C Patent rights to use these components in and I2C System, provided that the system
conforms to the I2C Standard Specification as defined by Philips.
Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc.
Copyright Zarlink Semiconductor Inc. All Rights Reserved.
TECHNICAL DOCUMENTATION - NOT FOR RESALE
©2020 ICPDF网 联系我们和版权申明