RL0402FK-139K76L [YAGEO]
LOW OHMIC CHIP RESISTORS;型号: | RL0402FK-139K76L |
厂家: | YAGEO CORPORATION |
描述: | LOW OHMIC CHIP RESISTORS |
文件: | 总9页 (文件大小:670K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
LOW OHMIC CHIP RESISTORS
RL series
5%, 2%, 1%
sizes 0402/0603/0805/1206/
1210/1218/2010/2512
RoHS compliant & Halogen Free
Product specification
2
2
SERIES
0402 to 2512
RL
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RL0402 to RL2512 low ohmic chip
resistors with lead-free terminations
made by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
GLOBAL PART NUMBER (PREFERRED)
RL XXXX X X X XX XXXX L
APPLICATIONS
( )
1
( ) ( ) ( ) ( )
( )
6
( )
7
2
3
4
5
Converters
( )
1 SIZE
Printer equipment
Server board
Telecom
0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512
( )
2 TOLERANCE
Consumer
F = ±1%
Car electronics
G = ±2%
J = ±5%
FEATURES
"-" = Jumper ordering
AEC-Q200 qualified
( )
3 PACKAGING TYPE
Halogen Free Epoxy
RoHS compliant
R = Paper taping reel
K = Embossed taping reel
( )
4 TEMPERATURE COEFFICIENT OF RESISTANCE
Hazardous wastes
– = Based on spec
High component and
equipment reliability
( )
5 TAPING REEL
Saving of PCB space
07 = 7 inch dia. Reel and standard power
Non-forbidden materials used
in products/production
13 = 13 inch dia. Reel and standard power
7W = 7 inch dia. Reel and 2 x standard power (0805 and 1206)
Low resistances applied to
current sensing
( )
6 RESISTANCE VALUE
There are 2~4 digits indicated the resistor value. Letter R/K/M is decimal point.
MSL Class: MSL 1
Detailed coding rules of resistance are shown in the table of “Resistance rule of global
part number”.
(7) DEFAULT CODE
Letter L is system default code for order only (Note)
Resistance rule of global part
number
ORDERING EXAMPLE
Resistance code rule
Example
The ordering code of a RL0603
chip resistor, value 0.56Ω with
±1% tolerance, supplied in 7-inch
tape reel is: RL0603FR-070R56L.
0R1 = 0.1 Ω
0R12 = 0.12 Ω
0R105 = 0.105 Ω
0RXXX
(1 to 976 mΩ)
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
1. All our R-Chip products meet RoHS
compliant and Halogen Free. "LFP" of
the internal 2D reel label mentions
"Lead Free Process"
2. On customized label, "LFP" or
specific symbol can be printed
XXRX
(10 to 97.6 Ω)
10R = 10 Ω
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
XKXX
(1 to 9.76 KΩ)
1K = 1,000 Ω
9K76 = 9760 Ω
XMXX
(1 to 9.76 MΩ)
1M = 1,000,000 Ω
9M76= 9,760,000 Ω
www.yageo.com
May. 27, 2016 V.1
Product specification
3
3
SERIES
0402 to 2512
RL
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
Last digit of 12NC
2350 / 2390 / 2322 XXX XXXXX L
Resistance decade (3)
Last digit
( )
4
(1)
(2)
(3)
EMBOSSED (2) PAPER/PE (2)
TAPE ON REEL TAPE ON REEL (units)
0
7
8
9
1
2
3
4
5
6
0.01 to 0.0976
Ω
START TOL. RESISTANCE
IN (1) (%) RANGE
SIZE TYPE
0.1 to 0.976
Ω
4,000
5,000
10,000
1 to 9.76
Ω
0402 LRC31
LRC32
2350 ±5% 0.05 to 1 Ω
2350 ±1% 0.05 to 1 Ω
2350 ±5% 0.01 to 1 Ω
2350 ±1% 0.01 to 1 Ω
2350 ±5% 0.01 to 1 Ω
2350 ±1% 0.01 to 1 Ω
2350 ±1% 0.01 to 1 Ω
2350 ±5% 0.01 to 1 Ω
2350 ±5% 0.01 to 1 Ω
2350 ±1% 0.01 to 1 Ω
2350 ±1% 0.01 to 1 Ω
2350 ±5% 0.01 to 1 Ω
-
-
-
-
-
-
-
-
-
-
-
-
-
513 20xxx
10 to 97.6
Ω
-
513 22xxx
100 to 976
1 to 9.76 k
Ω
0603 LRC21
LRC22
512 10xxx
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Ω
512 12xxx
10 to 97.6 k
Ω
0805 LRC11
LRC12
511 10xxx
100 to 976 k
Ω
511 12xxx
1 to 9.76 M
Ω
LRC11P
511 15xxx
10 to 97.6 M
Ω
LRC12P
511 17xxx
Example: 0.02
Ω
Ω
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
1206 LRC01
LRC02
510 10xxx
0.3
Ω
510 12xxx
1
Ω
LRC01P
519 01xxx
33 k
LRC02P
519 1xxxx
10 M
Ω
1210 LPRC101
LPRC101
2390 ±5% 0.01 to 0.0976 Ω -
735 90xxx
ORDERING EXAMPLE
2390 ±5% 0.1 to 1 Ω
2390 ±1% 0.01 to 1 Ω
2322 ±5% 0.01 to 1 Ω
2322 ±1% 0.01 to 1 Ω
-
735 60xxx
The ordering code of a RL0603 chip
LPRC102
-
735 3xxxx
1218 LPRC201
LPRC201
resistor, value 0.56 Ω with ±1%
tolerance, supplied in tape of 5,000
units per reel is: 235051212567L or
RL0603FR-070R56L.
735 64xxx
735 7xxxx
-
-
-
-
-
-
-
-
-
-
2010 LPRC111
LPRC111
2322 ±5% 0.01 to 0.0976 Ω 760 90xxx
2322 ±5% 0.1 to 1 Ω 760 60xxx
2322 ±1% 0.01 to 0.0976 Ω 761 90xxx
NOTE
LPRC111
1. All our R-Chip products meet RoHS
compliant and Halogen Free. "LFP" of
the internal 2D reel label mentions
"Lead Free Process"
LPRC111
2322 ±1% 0.1 to 1 Ω
761 6xxxx
2322 ±5% 0.01 to 0.0976 Ω 762 90xxx
2322 ±5% 0.1 to 1 Ω 762 60xxx
2322 ±1% 0.01 to 0.0976 Ω 763 90xxx
2512 LPRC221
LPRC221
LPRC221
2. On customized label, "LFP" or specific
symbol can be printed
LPRC221
2322 ±1% 0.1 to 1 Ω
763 6xxxx
(1) The resistors have a 12-digit ordering code starting with 2350/2390/2322.
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and packaging. (In
12NC code, only 07'' tape reel code is supplied. Supply of 10''/13'' tape reel is
requested in Global part number ordering code.)
(3) The remaining 4 or 3 digits represent the resistance value with the last digit
indicating the multiplier as shown in the table of “Last digit of 12NC”.
(4) Letter L is system default code for order only (Note)
.
www.yageo.com
May. 27, 2016 V.1
Product specification
4
4
SERIES
0402 to 2512
RL
Chip Resistor Surface Mount
MARKING
RL0402 / RL0603: R<100 m EXCEPT 10/20/30/40/50/60 m
Ω
Ω
No marking
Fig. 1
RL0603: R≥100 m , R = 10/20/30/40/50/60 m
Ω
Ω
E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mΩ):3 digits
The “R” is used as a decimal point; the other 2 digits are significant.
Fig. 2 Value = 220 mΩ
RL0805 / RL1206 / RL1210 /RL1218 / RL2010 / RL2512
E-24 series / Non-E series (R= 25/40/50/60/250/400/500 mΩ): 4 digits
The “R” is used as a decimal point; the other 3 digits are significant.
Fig. 3 Value = 20 mΩ
For further marking information, please see special data sheet “Chip resistors marking”.
CONSTRUCTION
The resistors are constructed out of a high-grade ceramic
body. Internal metal electrodes are added at each end and
connected by a resistive paste. The composition of the
paste is adjusted to give the approximate required
resistance and laser cutting of this resistive layer that
achieves tolerance trims the value. The resistive layer is
covered with a protective coat and printed with the
resistance value. Finally, the two external terminations
(matte tin) are added. See fig. 4.
OUTLINES
For dimension see Table 1
DIMENSIONS
Table 1 For outlines see fig. 4
TYPE
L (mm) W (mm) H (mm) I1 (mm) I2 (mm)
1.00 ±0.10 0.50 ±0.05 0.35 ±0.05 0.20 ±0.10 0.25 ±0.10
1.60 ±0.10 0.80 ±0.10 0.45 ±0.10 0.25 ±0.15 0.25 ±0.15
2.00 ±0.10 1.25 ±0.10 0.50 ±0.10 0.35 ±0.20 0.35 ±0.20
3.10 ±0.10 1.60 ±0.10 0.55 ±0.10 0.45 ±0.20 0.40 ±0.20
3.10 ±0.10 2.60 ±0.15 0.55 ±0.10 0.50 ±0.20 0.50 ±0.20
3.05 ±0.15 4.60 ±0.20 0.55 ±0.10 0.45 ±0.25 0.50 ±0.25
5.00 ±0.10 2.50 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
6.35 ±0.10 3.20 ±0.15 0.55 ±0.10 0.60 ±0.20 0.50 ±0.20
RL0402
RL0603
RL0805
RL1206
RL1210
RL1218
RL2010
RL2512
Fig. 4 Chip resistor outlines
www.yageo.com
May. 27, 2016 V.1
Product specification
5
5
SERIES
0402 to 2512
RL
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
Table 2
Power
P70
Operating Temp.
range
T. C. R.
( ppm/°C)
Type
Resistance range & tolerance
50mΩ ≤ R < 1Ω
Jumper criteria
Max. resistance 20mΩ
Rated current 1.5A
1/16W
RL0402
Max. resistance 20mΩ
-55°C to +155°C
10mΩ ≤ R < 1Ω
10mΩ ≤ R < 1Ω
10mΩ ≤ R < 1Ω
10mΩ ≤ R < 1Ω
10mΩ ≤ R < 1Ω
10mΩ ≤ R < 1Ω
10mΩ ≤ R < 1Ω
10mΩ ≤ R < 1Ω
10mΩ ≤ R < 1Ω
RL0603
1/10W
1/8W
Rated current 2A
Max. resistance 20mΩ
Rated current 2.5A
RL0805
-55°C to +125°C
-55°C to +155°C
-55°C to +125°C
--
--
1/4W
1/4W
Max. resistance 20mΩ
Rated current 3.5A
See following table
“T.C.R.- RL series”
RL1206
E24 ±1%, ±2%, ±5%
--
--
--
--
--
--
--
--
--
--
1/2W
1/2W
1W
RL1210
RL1218
RL2010
RL2512
-55°C to +155°C
3/4W
1W
TYPE / RESISTANCE
RANGE
TEMPERATURE COEFFICIENT
OF RESISTANCE
50m ≤R<100m
100m ≤R<500m
500m ≤R<1
Ω Ω
Ω
Ω
Ω
Ω
RL0402
RL0603
RL0805
50mΩ≤R<1Ω
10mΩ≤R<1Ω
±1000 ppm/°C
10m ≤R≤36m
±800 ppm/°C
±300 ppm/°C
500m <R<1
Ω
36m <R≤91m
91m <R≤500m
Ω
Ω
Ω
Ω
Ω
Ω
Ω
±1,500 ppm/°C
10m ≤R≤18m 18m <R≤47m
±1,200 ppm/°C
47m <R≤91m
±800 ppm/°C
±300 ppm/°C
91m <R≤360m
360m <R<500m
500m ≤R<1
Ω Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
±1,500 ppm/°C
10m ≤R≤18m
±1,200 ppm/°C
18m <R≤47m
±1,000 ppm/°C
47m <R≤91m
±600 ppm/°C
±300 ppm/°C
±200 ppm/°C
500m <R<1
Ω
91m <R≤360m
360m <R≤500m
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
Ω
RL1206
RL1210
RL2010
RL2512
10mΩ≤R<1Ω
10mΩ≤R<1Ω
±1,500 ppm/°C
±1,500 ppm/°C
±1,500 ppm/°C
±1,500 ppm/°C
±1,200 ppm/°C
±1,000 ppm/°C
±1,200 ppm/°C
±1,200 ppm/°C
±1,000 ppm/°C
±800 ppm/°C
±1,000 ppm/°C
±800 ppm/°C
±600 ppm/°C
±600 ppm/°C
±600 ppm/°C
±600 ppm/°C
±300 ppm/°C
±300 ppm/°C
±300 ppm/°C
±300 ppm/°C
±200 ppm/°C
±200 ppm/°C
±200 ppm/°C
±200 ppm/°C
10m ≤R≤30m
30m <R≤56m
56m <R≤180m
180m <R<1
Ω Ω
Ω
Ω
Ω
Ω
Ω
Ω
RL1218
±2,000 ppm/°C
±1,000 ppm/°C
±700 ppm/°C
±250 ppm/°C
FOOTPRINT AND SOLDERING PROFILES
For recommended footprint and soldering profiles, please see the special data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE
REEL DIMENSION RL0402 RL0603 RL0805 RL1206 RL1210 RL1218 RL2010 RL2512
Paper taping reel (R)
7" (178 mm)
13" (330 mm)
7" (178 mm)
10,000
50,000
---
5,000
20,000
---
5,000
20,000
---
5,000
20,000
---
5,000
20,000
---
---
---
---
---
---
---
Embossed taping reel (K)
4,000
4,000
4,000
NOTE
1. For paper/embossed tape and reel specification/dimensions, please see the special data sheet “Chip resistors packing”.
www.yageo.com
May. 27, 2016 V.1
Product specification
6
6
SERIES
0402 to 2512
RL
Chip Resistor Surface Mount
FUNCTIONAL DESCRIPTION
OPERATINGTEMPERATURE RANGE
Normal Power: Range: –55 °C to +155 °C (Fig. 5)
Double Power: Range: –55 °C to +125 °C (Fig. 6)
POWER RATING
Each type rated power at 70 °C:
RL0402=1/16 W;
RL0603=1/10 W;
RL0805=1/8 W, 1/4W;
RL1206=1/4 W, 1/2W;
RL1210=1/2 W;
RL1218=1 W;
RL2010=3/4 W;
RL2512=1 W.
Fig. 5 Maximum dissipation (P ) in percentage of rated power
max
as a function of the operating ambient temperature (T
)
amb
RATED VOLTAGE
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V = (PxR)
Where
(
)
V = Continuous rated DC or AC rms working
( )
voltage V
P = Rated power W
(
)
(
)
R = Resistance value Ω
Fig. 6 Maximum dissipation (P ) in percentage of rated power
max
as a function of the operating ambient temperature (T
)
amb
www.yageo.com
May. 27, 2016 V.1
Product specification
7
7
SERIES
0402 to 2512
RL
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
IEC 60115-1 4.25.1
Life/
Endurance
1,000 hours at 70±2°C applied RCWV
1.5 hours on, 0.5 hour off, still air required
±(2% +0.5mΩ )
MIL-STD-202 Method 108A
IEC 60068-2-2
High Temperature
Exposure
1,000 hours at maximum operating
temperature depending on specification,
unpowered
±(1% +0.5mΩ )
No direct impingement of forced air to the
parts
Normal power : Tolerances: 155±5℃
Double power : Tolerances: 125±5℃
MIL-STD-202 Method 106G
Moisture Resistance
Each temperature / humidity cycle is defined at
8 hours, 3 cycles / 24 hours for 10d with 25 °C
/ 65 °C 95% R.H, without steps 7a & 7b,
unpowered
±(2% +0.5mΩ )
Parts mounted on test-boards, without
condensation on parts
MIL-STD-202 Method 107G
Thermal Shock
-55/+125 °C
±(1% +0.5mΩ )
Number of cycles required is 300.
Devices mounted
Maximum transfer time is 20 seconds. Dwell
time is 15 minutes.
IEC60115-1 4.13
IEC 60115-1 4.33
Short time overload
RL standard power: 2.5 times rated voltage for
5 sec at room temperature
±(2% +0.5mΩ )
No visible damage
RL high power: 5 times rated power for 5 sec
at room temperature
Board Flex/
Bending
Device mounted on PCB test board as
described, only 1 board bending required
±(1% +0.5mΩ )
No visible damage
3 mm bending
Bending time: 60±5 seconds
Ohmic value checked during bending
www.yageo.com
May. 27, 2016 V.1
Product specification
8
8
SERIES
0402 to 2512
RL
Chip Resistor Surface Mount
TEST
TEST METHOD
J-STD-002 test B
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
Well tinned (≥95% covered)
No visible damage
Electrical Test not required
Magnification 50X
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2nd step: leadfree solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
J-STD-002 test D
- Leaching
Leadfree solder, 260 °C, 30 seconds
immersion time
No visible damage
IEC 60115-1 4.18
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples.
±(1% +0.5mΩ )
Leadfree solder, 260 °C, 10 seconds
immersion time
No visible damage
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
www.yageo.com
May. 27, 2016 V.1
Product specification
9
9
SERIES
0402 to 2512
RL
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 1
Dec. 16, 2015
-
- Extend 0805 T.C.R. range
Version 0
Nov. 11, 2014
-
- First issue of this specification
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
May. 27, 2016 V.1
相关型号:
©2020 ICPDF网 联系我们和版权申明