PNP300JR-73-10R [YAGEO]
Fixed Resistor, Wire Wound, 3W, 10ohm, 300V, 5% +/-Tol, 300ppm/Cel, Through Hole Mount, AXIAL LEADED;
| 型号： | PNP300JR-73-10R |
| 厂家： | 
YAGEO CORPORATION |
| 描述： | Fixed Resistor, Wire Wound, 3W, 10ohm, 300V, 5% +/-Tol, 300ppm/Cel, Through Hole Mount, AXIAL LEADED 电阻器 |
| 文件： | 总2页 (文件大小：190K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Through-hole resisTors
High Power Type
Wirewound Resistors
Ultra Miniature Style [ PNP Series ]
FeATuꢄes
Power Rating
1W, 2W, 3W, 4W
±1%, ±5%
ResistanceTolerance
T.C.R.
±300ppm/°C
UL-94V-0
Flameproof Multi-layer Coating Meets
Flameproof Feature Meets OverloadTest
UL-1412
iNTꢄoDuCTioN
DeꢄATiNg CuꢄVe
The resistor element is a resistive wire which
is wound in a single layer on a ceramic rod,
with tinned connecting wires of electrolytic
copper welded to the end-caps. The ends of
the resistive wire are connected to the caps by
welding. The resistors are coated with layers of
green color flame-proof lacquer. High power in
small packages.
For resistors operated in ambient temperatures above 70°C, power rating must be derated
in accordance with the curve below.
70
200
275 °C
Rated Load (%)
100
80
60
40
20
AmbientTemperature (°C)
50 100 150 200 250 300
DiMeNsioNs
Unit: mm
sTYle
DiMeNsioN
l
uꢀtra Mꢁnꢁatꢂrꢃ
øD
h
ød
ød
PNP100
PNP200
PNP300
PNP400
6.3±0.5
9.0±0.5
11.5±1.0
15.5±1.0
2.5±0.3
3.5±0.3
4.6±0.5
5.2±0.5
28±2.0
26±2.0
35±2.0
33±2.0
0.55±0.05
0.55±0.05
0.8±0.05
0.8±0.05
H
L
øD
5th color code: violet
55
Note:
eleCTꢄiCAl ChAꢄACTeꢄisTiCs
sTYle
PNP100
PNP200
PNP300
PNP400
Power Rating at 70°C
Maximum working voltage
Voltage Proof on Insulation
Resistance Range (±1%)
Resistance Range (±5%)
OperatingTemp. Range
Temperature Coefficient
1W
2W
3W
4W
PxR
300V
0.22Ω - 130Ω
0.1Ω - 130Ω
-40°C to +200°C
±300ppm/°C
0.1Ω - 820Ω
0.1Ω - 820Ω
0.1Ω - 2.2KΩ
0.1Ω - 2.2KΩ
0.1Ω - 2.8KΩ
0.1Ω - 2.8KΩ
Note: Special value is available on request
eNViꢄoNMeNTAl ChAꢄACTeꢄisTiCs
PeꢄFoꢄMANCe TesT
ShortTime Overload
Voltage Proof on Insulation
Temperature Coefficient
Insulation Resistance
Solderability
TesT MeThoD
IEC 60115-1 4.13
IEC 60115-1 4.7
IEC 60115-1 4.8
IEC 60115-1 4.6
IEC 60115-1 4.17
APPꢄAise
±2.0%+0.05Ω
By type
10 times rated power for 5 Sec.
inV-block for 60 Sec., test voltage by type
-55°C to +155°C
By type
inV-block for 60 Sec.
>100MΩ
235±5°C for 3±0.5 Sec.
95% Min. coverage
No deterioration of
coatings and markings
Solvent Resistance of Marking
IEC 60115-1 4.30
IPA for 5±0.5 Min. with ultrasonic
Robustness ofTerminations
Damp Heat Steady State
Endurance at 70°C
IEC 60115-1 4.16
IEC 60115-1 4.24
IEC 60115-1 4.25
IEC 60115-1 4.19
IEC 60115-1 4.18
Direct load for 10 Sec. in the direction of the terminal leads
40±2°C, 90-95% RH for 56 days, loaded with 0.1 times RCWV
70±2°C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off)
≥2.5kg (24.5N)
±5.0%+0.05Ω
±5.0%+0.05Ω
±1.0%+0.05Ω
±1.0%+0.05Ω
Temperature Cycling
-55°C RoomTemp. +155°C RoomTemp. (5 cycles)
260±3°C for 10±1 Sec., immersed to a point 3±0.5mm from the body
Resistance to Soldering Heat
No evidence of flaming
Accidental OverloadTest
IEC 60115-1 4.26
4 times RCWV for 1 Min.
or arcing
Revision: 201304
Note: RCWV(Rated Continuous WorkingVoltage) = Power Rating x ResistanceValue or Max. working voltage listed above, whichever less.
相关型号：
©2020 ICPDF网 联系我们和版权申明