AC2512DK-13976R [YAGEO]
THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE;型号: | AC2512DK-13976R |
厂家: | YAGEO CORPORATION |
描述: | THICK FILM CHIP RESISTORS AUTOMOTIVE GRADE |
文件: | 总12页 (文件大小:955K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
THICK FILM CHIP RESISTORS
AUTOMOTIVE GRADE
AC series
±5%, ±1%, ±0.5%
Sizes 0201/0402/0603/0805/1206/
1210/1218/2010/2512
RoHS compliant & Halogen free
Product specification
2
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER
This specification describes AC0201
to AC2512 chip resistors with lead-
free terminations made by thick film
process.
Part number is identified by the series name, size, tolerance, packaging
type, temperature coefficient, taping reel and resistance value.
GLOBAL PART NUMBER
AC XXXX X X X XX XXXX L
( )
( ) ( ) ( ) ( )
( )
6
( )
7
1
2
3
4
5
APPLICATIONS
All general purpose applications
( )
1 SIZE
Car electronics, industrial
0201/ 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512
application
( )
2 TOLERANCE
D = ±0.5%
FEATURES
AEC-Q200 qualified
F = ±1%
J = ±5% (for Jumper ordering, use code of J)
Moisture sensitivity level: MSL 1
AC series soldering is compliant
( )
3 PACKAGING TYPE
with J-STD-020D
Halogen free epoxy
RoHS compliant
R = Paper taping reel
K = Embossed taping reel
( )
4 TEMPERATURE COEFFICIENT OF RESISTANCE
- Products with lead-free
terminations meet RoHS
requirements
– = Base on spec
( )
5 TAPING REEL
- Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS
07 = 7 inch dia. Reel
13 = 13 inch dia. Reel
7W = 7 inch dia. Reel & 2 x standard power
Reduce environmentally
( )
6 RESISTANCE VALUE
hazardous waste
High component and equipment
1Ω to 22 MΩ
reliability
There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no
need to mention the last zero after R/K/M, e.g.1K2, not 1K20.
The resistors are 100% performed
by automatic optical inspection
prior to taping.
Detailed coding rules of resistance are shown in the table of “Resistance rule of
global part number”.
(7) DEFAULT CODE
Letter L is the system default code for ordering only. (Note)
ORDERING EXAMPLE
Resistance rule of global part
number
The ordering code for an AC0402
chip resistor, value 100 KΩ with
±1% tolerance, supplied in 7-inch
tape reel is: AC0402FR-07100KL.
Resistance coding
rule
Example
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
1. All our R-Chip products are RoHS
compliant and Halogen free. "LFP" of the
internal 2D reel label states "Lead-Free
Process".
XXRX
10R = 10 Ω
(10 to 97.6 Ω)
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
976R = 976 Ω
2. On customized label, "LFP" or specific
symbol can be printed.
XKXX
1K = 1,000 Ω
3. AC series with ±0.5% tolerance is also
available. For further information, please
contact sales.
(1 to 9.76 KΩ)
9K76 = 9760 Ω
XMXX
(1 to 9.76 MΩ)
1M = 1,000,000 Ω
9M76= 9,760,000 Ω
XXMX
(10 MΩ)
10M = 10,000,000 Ω
www.yageo.com
Nov. 02, 2016 V.5
Product specification
3
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
MARKING
AC0201 / AC0402
No marking
Fig. 1
AC0603 / AC0805 / AC1206 / AC1210 / AC2010 / AC2512
E-24 series: 3 digits, ±5%
First two digits for significant figure and 3rd digit for number of zeros
03
Fig. 2 Value=10 KΩ
AC0603
E-24 series: 3 digits, ±1% & ±0.5%
One short bar under marking letter
0
Fig. 3
Value = 24 Ω
E-96 series: 3 digits, ±1% & ±0.5%
First two digits for E-96 marking rule and 3rd letter for number of zeros
Fig. 4
Value = 12.4 KΩ
AC0805 / AC1206 / AC1210 / AC2010 / AC2512
Both E-24 and E-96 series: 4 digits, ±1% & ±0.5%
First three digits for significant figure and 4th digit for number of zeros
Fig. 5 Value = 10 KΩ
AC1218
E-24 series: 3 digits, ±5%
First two digits for significant figure and 3rd digit for number of zeros
Fig. 6 Value = 10 KΩ
Both E-24 and E-96 series: 4 digits, ±1% & ±0.5%
First three digits for significant figure and 4th digit for number of zeros
00
Fig. 7 Value = 10 KΩ
NOTE
For further marking information, please refer to data sheet “Chip resistors marking”. Marking of AC series is the same as RC series.
www.yageo.com
Nov. 02, 2016 V.5
Product specification
4
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
CONSTRUCTION
The resistors are constructed on top of an automotive grade ceramic body. Internal metal electrodes are added at
each end and connected by a resistive glaze. The resistive glaze is covered by a lead-free glass.
The composition of the glaze is adjusted to give the approximately required resistance value and laser trimming of this
resistive glaze achieves the value within tolerance. The whole element is covered by a protective overcoat. Size 0603 and
bigger is marked with the resistance value on top. Finally, the two external terminations (Ni / matte tin) are added, as
shown in Fig.8.
OUTLINES
marking layer
overcoat
marking layer
overcoat
protective glass
protective glass
resistive layer
(Jumper chip is a conductor)
resistive layer
(Jumper chip is a conductor)
inner electrode
inner electrode
termination(Ni/matte tin)
inner electrode
termination(Ni/matte tin)
inner electrode
ceramic substrate
ceramic substrate
YNSC088
YNSC08
8_1
Fig. 8_2 AC2010/ 2512 double power chip resistor outlines
Fig. 8_1 Chip resistor outlines
DIMENSIONS
Table 1 For outlines, please refer to Fig. 9
TYPE
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
AC0201
AC0402
AC0603
AC0805
AC1206
AC1210
AC1210 7W
AC1218
AC2010
AC2512
0.60±0.03
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
3.10 ±0.10
3.10 ±0.10
3.10 ±0.10
5.00 ±0.10
6.35 ±0.10
0.30±0.03
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
2.60 ±0.15
2.60 ±0.15
4.60 ±0.10
2.50 ±0.15
3.10 ±0.15
0.23±0.03
0.32 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.12±0.05
0.20 ±0.10
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.45 ±0.15
0.45 ±0.15
0.45 ±0.20
0.55 ±0.15
0.60 ±0.20
0.15±0.05
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
0.50 ±0.20
0.50 ±0.20
0.40 ±0.20
0.50 ±0.20
0.50 ±0.20
For dimension, please refer to Table 1
Fig. 9 Chip resistor dimensions
Nov. 02, 2016 V.5
AC0201/0402
0603/0805/1206/1210/
2010/2512
AC1218
Side view for all type
www.yageo.com
Product specification
5
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
Table 2
CHARACTERISTICS
Resistance
Max. Dielectric
Temperature
Coefficient
Jumper
Criteria
Operating
Temperature
Range
Max.
Working Overload Withstandin
Voltage
TYPE
POWER
Range
Voltage g Voltage
Rated
Current
0.5A
5% (E24)
1Ω≤R≤10MΩ
1% (E24/E96)
1Ω≤R≤10MΩ
0.5% (E24/E96)
10Ω≤R≤1MΩ
1Ω≤R≤10Ω
-100/+350ppm℃
10Ω<R≤10MΩ
±200ppm℃
–55 °C to
155 °C
AC0201
1/20 W
25V
50V
50V
Maximum
Current
1.0A
Jumper<50mΩ
Rated
Current
1A
5% (E24)
1Ω≤R≤22MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200ppm°C
–55 °C to
155 °C
10Ω<R≤10MΩ
±100ppm°C
1/16 W
50V
50V
100V
100V
100V
100V
Maximum
Current
2A
Jumper<50mΩ
10MΩ<R≤22MΩ
±200ppm°C
AC0402
5% (E24)
1Ω≤R≤10MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200 ppm°C
10Ω<R≤10MΩ
±100 ppm°C
–55 °C to
155 °C
1/8W
Rated
Current
1A
5% (E24)
1Ω≤R≤22MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200ppm°C
10Ω<R≤10MΩ
±100ppm°C
–55 °C to
155 °C
1/10 W
75V
75V
150V
150V
150V
150V
Maximum
Current
2A
Jumper<50mΩ
10MΩ<R≤22MΩ
±200ppm°C
AC0603
5% (E24)
1Ω≤R≤10MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200 ppm°C
10Ω<R≤10MΩ
±100 ppm°C
–55 °C to
155 °C
1/5 W
www.yageo.com
Nov. 02, 2016 V.5
Product specification
6
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
CHARACTERISTICS
Resistance
Max. Dielectric
Temperature
Coefficient
Jumper
Criteria
Operating
Temperature
Range
Max.
Working Overload Withstandin
Voltage
TYPE
POWER
Range
Voltage g Voltage
Rated
Current
2A
5% (E24)
1Ω≤R≤22MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200ppm°C
10Ω<R≤10MΩ
±100ppm°C
–55 °C to
155 °C
1/8 W
150V
300V
300V
Maximum
Current
5A
Jumper<50mΩ
10MΩ<R≤22MΩ
±200ppm°C
AC0805
5% (E24)
1Ω≤R≤10MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200 ppm°C
10Ω<R≤10MΩ
±100 ppm°C
–55 °C to
155 °C
1/4 W
1/4 W
1/2 W
1/2 W
1 W
150V
200V
200V
200V
200V
300V
400V
400V
500V
500V
300V
500V
500V
500V
500V
Rated
Current
2A
5% (E24)
1Ω≤R≤22MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200ppm°C
–55 °C to
155 °C
10Ω<R≤10MΩ
±100ppm°C
Maximum
Current
10A
Jumper<50mΩ
10MΩ<R≤22MΩ
±200ppm°C
AC1206
5% (E24)
1Ω≤R≤10MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200 ppm°C
10Ω<R≤10MΩ
±100 ppm°C
–55 °C to
155 °C
Rated
Current
2A
5% (E24)
1Ω≤R≤22MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200ppm°C
–55 °C to
155 °C
10Ω<R≤10MΩ
±100ppm°C
Maximum
Current
10A
Jumper<50mΩ
10MΩ<R≤22MΩ
±200ppm°C
AC1210
5% (E24)
1Ω≤R≤10MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200 ppm°C
10Ω<R≤10MΩ
±100 ppm°C
–55 °C to
155 °C
www.yageo.com
Nov. 02, 2016 V.5
Product specification
7
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
CHARACTERISTICS
Resistance
Max. Dielectric
Temperature
Coefficient
Jumper
Criteria
Operating
Temperature
Range
Max.
Working Overload Withstandin
Voltage
TYPE
POWER
Range
Voltage g Voltage
Rated
Current
6A
5% (E24)
1Ω≤R≤1MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤1MΩ
1Ω≤R≤10Ω
±200ppm°C
10Ω<R≤1MΩ
±100ppm°C
–55 °C to
155 °C
1 W
200V
500V
500V
500V
500V
Maximum
Current
10A
Jumper<50mΩ
AC1218
5% (E24)
1Ω≤R≤1MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤1MΩ
1Ω≤R≤10Ω
±200 ppm°C
10Ω<R≤1MΩ
±100 ppm°C
–55 °C to
155 °C
1.5W
3/4 W
1.25W
1 W
200V
200V
200V
200V
200V
Rated
Current
2A
5% (E24)
1Ω≤R≤22MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200ppm°C
–55 °C to
155 °C
10Ω<R≤10MΩ
±100ppm°C
500V
500V
500V
400V
500V
500V
500V
500V
Maximum
Current
10A
Jumper<50mΩ
10MΩ<R≤22MΩ
±200ppm°C
AC2010
5% (E24)
1Ω≤R≤10MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200 ppm°C
10Ω<R≤10MΩ
±100 ppm°C
–55 °C to
155 °C
Rated
Current
2A
5% (E24)
1Ω≤R≤22MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200ppm°C
–55 °C to
155 °C
10Ω<R≤10MΩ
±100ppm°C
Maximum
Current
10A
Jumper<50mΩ
10MΩ<R≤22MΩ
±200ppm°C
AC2512
5% (E24)
1Ω≤R≤10MΩ
0.5%, 1% (E24/E96)
1Ω≤R≤10MΩ
1Ω≤R≤10Ω
±200 ppm°C
10Ω<R≤10MΩ
±100 ppm°C
–55 °C to
155 °C
2 W
www.yageo.com
Nov. 02, 2016 V.5
Product specification
8
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
FOOTPRINT AND SOLDERING PROFILES
Recommended footprint and soldering profiles of AC-series is the same as RC-series. Please refer to data sheet
“Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE
REEL AC0201 AC0402 AC0603 AC0805 AC1206 AC1210 AC1218 AC2010 AC2512
DIMENSION
Paper taping reel (R)
7" (178 mm) 10,000 10,000
13" (330 mm) 50,000 50,000 20,000 20,000 20,000 20,000
7" (178 mm) --- --- --- --- --- ---
5,000
5,000
5,000
5,000
---
---
---
---
---
---
Embossed taping reel (K)
4,000
4,000
4,000
NOTE
1. For paper/embossed tape and reel specifications/dimensions, please refer to data sheet “Chip resistors packing”.
FUNCTIONAL DESCRIPTION
OPERATING TEMPERATURE RANGE
Range: –55 °C to +155 °C
POWER RATING
Each type rated power at 70 °C:
AC0201=1/20W (0.05W)
AC0402=1/16W (0.0625W); 1/8W (0.125W)
AC0603=1/10W (0.1W); 1/5W (0.2W)
AC0805=1/8W (0.125W); 1/4 W(0.25 W)
AC1206=1/4W (0.25W); 1/2 W (0.5 W)
AC1210=1/2W (0.5W); 1W
AC1218=1W; 1.5W
AC2010=3/4W (0.75W); 1.25W
AC2512=1 W; 2W
Fig. 10 Maximum dissipation (P ) in percentage of rated power
max
RATED VOLTAGE
as a function of the operating ambient temperature (T
)
amb
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V =
(PxR)
Or Maximum working voltage whichever is less
Where
(
)
V = Continuous rated DC or AC rms working
( )
voltage V
P = Rated power W
(
)
( )
R = Resistance value Ω
www.yageo.com
Nov. 02, 2016 V.5
Product specification
9
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
High Temperature
Exposure
AEC-Q200 Test 3
±(1.0%+0.05Ω) for D/F tol
±(2.0%+0.05Ω) for J tol
<50 mΩ for Jumper
1,000 hours at TA = 155 °C, unpowered
MIL-STD-202 Method 108
Moisture
Resistance
AEC-Q200 Test 6
Each temperature / humidity cycle is defined at
8 hours (method 106F), 3 cycles / 24 hours for
10d. with 25 °C / 65 °C 95% R.H, without steps
7a & 7b, unpowered
±(0.5%+0.05Ω) for D/F tol
±(2.0%+0.05Ω) for J tol
<100 mΩ for Jumper
MIL-STD-202 Method 106
Parts mounted on test-boards, without
condensation on parts
Biased
Humidity
AEC-Q200 Test 7
1,000 hours; 85 °C / 85% RH
10% of operating power
±(1.0%+0.05Ω) for D/F tol
±(3.0%+0.05Ω) for J tol
<100 mΩ for Jumper
MIL-STD-202 Method 103
Measurement at 24±4 hours after test conclusion.
Operational Life
AEC-Q200 Test 8
1,000 hours at 125 °C, derated voltage applied for ±(1.0%+0.05Ω) for D/F tol
1.5 hours on, 0.5 hour off, still-air required
MIL-STD-202 Method 108
±(3.0%+0.05Ω) for J tol
<100 mΩ for Jumper
Resistance to
Soldering Heat
AEC-Q200 Test 15
Condition B, no pre-heat of samples
±(0.5%+0.05Ω) for D/F tol
±(1.0%+0.05Ω) for J tol
<50 mΩ for Jumper
MIL-STD-202 Method 210
Lead-free solder, 260± 5 °C, 10±1 seconds
immersion time
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
No visible damage
Thermal Shock
AEC-Q200 Test 16
-55/+125 °C
±(0.5%+0.05Ω) for D/F tol
±(1.0%+0.05Ω) for J tol
<50 mΩ for Jumper
MIL-STD-202 Method 107
Number of cycles is 300. Devices mounted
Maximum transfer time is 20 seconds.
Dwell time is 15 minutes. Air – Air
ESD
AEC-Q200 Test 17
AEC-Q200-002
Human Body Model,
1 pos. + 1 neg. discharges
0201: 500V
±(3.0%+0.05 Ω)
<50 mΩ for Jumper
0402/0603: 1KV
0805 and above: 2KV
www.yageo.com
Nov. 02, 2016 V.5
Product specification
10
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
TEST
TEST METHOD
AEC-Q200 Test 18
J-STD-002
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
Electrical Test not required Magnification 50X
SMD conditions:
Well tinned (≥95% covered)
No visible damage
(a) Method B, aging 4 hours at 155 °C dry heat,
dipping at 235±3 °C for 5±0.5 seconds.
(b) Method B, steam aging 8 hours, dipping at
215±3 °C for 5±0.5 seconds.
(c) Method D, steam aging 8 hours, dipping at
260±3 °C for 7±0.5 seconds.
Board Flex
AEC-Q200 Test 21
AEC-Q200-005
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
±(1.0%+0.05Ω)
<50 mΩ for Jumper
Bending for 0201/0402: 5 mm
0603/0805: 3 mm
1206 and above: 2 mm
Holding time: minimum 60 seconds
Temperature
Coefficient of
MIL-STD-202 Method 304
At +25/–55 °C and +25/+125 °C
Refer to table 2
Resistance (T.C.R.)
Formula:
R2–R1
T.C.R= ------------------------- ×106 (ppm/°C)
R1(t2–t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
Short Time
Overload
IEC60115-1 4.13
ASTM-B-809-95
2.5 times of rated voltage or maximum
overload voltage whichever is less for 5 sec
at room temperature
±(1.0%+0.05Ω) for D/F tol
±(2.0%+0.05Ω) for J tol
<50 mΩ for Jumper
FOS
±( 1.0%+0.05Ω)
Sulfur (saturated vapor) 500 hours, 60±2℃,
unpowered
www.yageo.com
Nov. 02, 2016 V.5
Product specification
11
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 5
Version 4
Version 3
Dec. 07, 2015
May 25, 2015
Feb 13, 2014
-
-
-
- Add in AC double power
- Remove 7D packing
- Extend resistance range
- Add in AC0201
- Update FOS test and requirements
- Feature description updated
- add ± 0.5%
- delete 10" taping reel
Version 2
Version 1
Feb. 10, 2012
Feb. 01, 2011
-
-
- Jumper criteria added
- AC1218 marking and outline figure updated
- Case size 1210, 1218, 2010, 2512 extended
- Test method and procedure updated
- Packing style of 7D added
Version 0
Nov. 10, 2010
-
- First issue of this specification
www.yageo.com
Nov. 02, 2016 V.5
Product specification
12
12
SERIES
0201 to 2512
AC
Chip Resistor Surface Mount
LEGAL DISCLAIMER
Yageo, its distributors and agents (collectively, “Yageo”), hereby disclaims any and all liabilities for any errors,
inaccuracies or incompleteness contained in any product related information, including but not limited to
product specifications, datasheets, pictures and/or graphics. Yageo may make changes, modifications and/or
improvements to product related information at any time and without notice.
Yageo makes no representation, warranty, and/or guarantee about the fitness of its products for any particular
purpose or the continuing production of any of its products. To the maximum extent permitted by law, Yageo
disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all
liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for a particular purpose, non-infringement and merchantability.
Yageo statements regarding the suitability of products for certain types of applications are based on Yageo’s
knowledge of typical operating conditions for such types of applications in a generic nature. Such statements
are neither binding statements of Yageo nor intended to constitute any warranty concerning the suitability for a
specific customer application or use. They are intended for use only by customers with requisite knowledge and
experience for determining whether Yageo products are the correct products for their application or use. In
addition, unpredicatable and isolated cases of product failure may still occur, therefore, customer application or
use of Yageo products which requires higher degree of reliability or safety, shall employ additional protective
safeguard measures to ensure that product failure would not result in personal injury or property damage.
Yageo products are not designed for application or use in medical, life-saving, or life-sustaining devices or for
any other application or use in which the failure of Yageo products could result in personal injury or death.
Customers using or selling Yageo products not expressly indicated for above-mentioned purposes shall do so at
their own risk and agree to fully indemnify Yageo and hold Yageo harmless.
Information provided here is intended to indicate product specifications only. Yageo reserves all the rights for
revising this content without further notification, as long as products are unchanged. Any product change will
be announced by PCN.
www.yageo.com
Nov. 02, 2016 V.5
相关型号:
©2020 ICPDF网 联系我们和版权申明