AA0402DK-131R 概述
ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE
AA0402DK-131R 数据手册
通过下载AA0402DK-131R数据手册来全面了解它。这个PDF文档包含了所有必要的细节,如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载ANTI-SULFURATED CHIP RESISTORS
AUTOMOTIVE GRADE
AA series
±5%, ±1%, ±0.5%
sizes 0201/0402/0603/0805/1206/
1210/1218/2010/2512
RoHS compliant & Halogen free
Product specification
2
10
SERIES
0201 to 2512
AA
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER
This specification describes AA0201
to AA2512 chip resistors with lead-
free terminations made by thick film
process.
Part number is identified by the series name, size, tolerance, packaging
type, temperature coefficient, taping reel and resistance value.
GLOBAL PART NUMBER
AA XXXX X X X XX XXXX L
( )
1
( ) ( ) ( ) ( )
( )
6
( )
7
2
3
4
5
APPLICATIONS
Car electronics
( )
1 SIZE
Engine control unit
Body control system
Safety devices
0201 / 0402 / 0603 / 0805 / 1206 / 1210 / 1218 / 2010 / 2512
( )
2 TOLERANCE
D =±0.5%
F = ±1%
FEATURES
J = ±5% (for Jumper ordering, use code of J)
Superior resistance against sulfur
containing atmosphere
( )
3 PACKAGING TYPE
AEC-Q200 qualified
R = Paper/PE taping reel
K = Embossed taping reel
Moisture sensitivity level: MSL1
( )
4 TEMPERATURE COEFFICIENT OF RESISTANCE
AA series soldering is compliant
– = Base on spec
with J-STD-020D
Halogen free epoxy
RoHS compliant
( )
5 TAPING REEL
07 = 7 inch dia. Reel
13 = 13 inch dia. Reel
Reduce environmentally
( )
6 RESISTANCE VALUE
hazardous waste
1Ω to 10 MΩ
High component and equipment
There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no
need to mention the last zero after R/K/M, e.g.1K2, not 1K20.
reliability
The resistors are 100% performed
by automatic optical inspection
(7) DEFAULT CODE
Letter L is the system default code for ordering only. (Note)
ORDERING EXAMPLE
The ordering code for an AA0402 chip
Resistance rule of global part
number
Resistance coding
rule
resistor, value 100 KΩ with ±1%
tolerance, supplied in 7-inch tape reel is:
AA0402FR-07100KL
Example
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
1. All our R-Chip products are RoHS
compliant and Halogen free. "LFP" of the
internal 2D reel label states "Lead-Free
Process".
XXRX
(10 to 97.6 Ω)
10R = 10 Ω
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
976R = 976 Ω
2. On customized label, "LFP" or specific
symbol can be printed.
XKXX
1K = 1,000 Ω
(1 to 9.76 KΩ)
9K76 = 9760 Ω
XMXX
(1 to 9.76 MΩ)
1M = 1,000,000 Ω
9M76= 9,760,000 Ω
XXMX
(10 MΩ)
10M = 10,000,000 Ω
www.yageo.com
Dec. 08 2015 V.3
Product specification
3
10
SERIES
0201 to 2512
AA
Chip Resistor Surface Mount
MARKING
AA0201 / AA0402
No marking
Fig. 1
AA0603 / AA0805 / AA1206 / AA1210 / AA2010 / AA2512
E-24 series: 3 digits, ±5%
First two digits for significant figure and 3rd digit for number of zeros
Fig. 2 Value=10 KΩ
AA0603
E-24 series: 3 digits, ±1%
One short bar under marking letter
Fig. 3
Value = 24 Ω
E-96 series: 3 digits, ±1%
First two digits for E-96 marking rule and 3rd letter for number of zeros
Fig. 4
Value = 12.4 KΩ
AA0805 / AA1206 / AA1210 / AA2010 / AA2512
Both E-24 and E-96 series: 4 digits, ±1%
First three digits for significant figure and 4th digit for number of zeros
Fig. 5 Value = 10 KΩ
AA1218
E-24 series: 3 digits, ±5%
First two digits for significant figure and 3rd digit for number of zeros
Fig. 6 Value = 10 KΩ
Both E-24 and E-96 series: 4 digits, ±1%
First three digits for significant figure and 4th digit for number of zeros
Fig. 7 Value = 10 KΩ
NOTE
For further marking information, please refer to data sheet “Chip resistors marking”. Marking of AA series is the same as RC series.
www.yageo.com
Dec. 08 2015 V.3
Product specification
4
10
SERIES
0201 to 2512
AA
Chip Resistor Surface Mount
CONSTRUCTION
The resistors are constructed on top of an automotive
grade ceramic body. Internal metal electrodes are
added at each end and connected by a resistive glaze.
The resistive glaze is covered by a lead-free glass.
The composition of the glaze is adjusted to give the
approximately required resistance value and laser
trimming of this resistive glaze achieves the value within
tolerance. The whole element is covered by a protective
overcoat. Size 0603 and bigger is marked with the
resistance value on top. Finally, the two external
OUTLINES
terminations (Ni / matte tin) are added, as shown in Fig.8.
Fig. 8 Chip resistor outlines
DIMENSIONS
Table 1 For outlines, please refer to Fig. 9
TYPE
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
AA0201
AA0402
AA0603
AA0805
AA1206
AA1210
AA1218
AA2010
AA2512
0.60 ±0.03
1.00 ±0.05
1.60 ±0.10
2.00 ±0.10
3.10 ±0.10
3.10 ±0.10
3.10 ±0.10
5.00 ±0.10
6.35 ±0.10
0.30 ±0.03
0.50 ±0.05
0.80 ±0.10
1.25 ±0.10
1.60 ±0.10
2.60 ±0.15
4.60 ±0.10
2.50 ±0.15
3.10 ±0.15
0.23 ±0.03
0.32 ±0.05
0.45 ±0.10
0.50 ±0.10
0.55 ±0.10
0.50 ±0.10
0.55 ±0.10
0.55 ±0.10
0.55 ±0.10
0.12 ±0.05
0.20 ±0.10
0.15 ±0.05
0.25 ±0.10
0.25 ±0.15
0.35 ±0.20
0.40 ±0.20
0.50 ±0.20
0.40 ±0.20
0.50 ±0.20
0.50 ±0.20
0.25 ±0.15
0.35 ±0.20
0.45 ±0.20
0.45 ±0.15
0.45 ±0.20
0.55 ±0.15
0.60 ±0.20
For dimension, please refer to Table 1
AA0201 / AA0402
AA0603/0805/1206/
1210/2010/2512
AA1218
Side view for all type
Fig. 9 Chip resistor dimensions
www.yageo.com
Dec. 08 2015 V.3
Product specification
5
10
SERIES
0201 to 2512
AA
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
Table 2
CHARACTERISTICS
Operating
Max.
Max.
Dielectric
Temperature
Coefficient
RESISTANCE
RANGE
TYPE
Temperature Range Working Overload Withstanding
Jumper Criteria
Voltage
Voltage
Voltage
of Resistance
1Ω ≤ R ≤ 10Ω ,
-100/+400 ppm/°C
Rated Current 0.5A
Max. Current 1.0A
AA0201
25V
50V
50V
10Ω < R ≤ 10 MΩ ,
±300 ppm/°C
Rated Current 1A
Max. Current 2A
Rated Current 1A
Max. Current 2A
Rated Current 2A
Max. Current 5A
Rated Current 2A
Max. Current 10A
AA0402
AA0603
AA0805
AA1206
AA1210
AA1218
AA2010
AA2512
50 V
75V
100 V
150 V
300 V
400 V
500 V
500 V
500 V
500 V
100 V
150 V
300 V
500 V
500 V
500 V
500 V
500 V
5% (E24)
1Ω≤ R ≤ 22MΩ
(0201: Max. 10MΩ.
1218: Max. 1MΩ)
0.5%, 1% (E24/E96)
1Ω≤ R ≤10MΩ
(1218: Max. 1MΩ)
Jumper < 50mΩ
150 V
200 V
200 V
200 V
200 V
200 V
1 Ω ≤ R ≤ 10 Ω ,
±200 ppm/°C
–55 °C to +155 °C
10 Ω < R ≤ 10 MΩ ,
±150 ppm/°C Rated Current 2A
10 MΩ < R ≤ 22 M
Max. Current 10A
Rated Current 6A
Max. Current 10A
Rated Current 2A
Max. Current 10A
Rated Current 2A
Max. Current 10A
Ω , ±200 ppm/°C
www.yageo.com
Dec. 08 2015 V.3
Product specification
6
10
SERIES
0201 to 2512
AA
Chip Resistor Surface Mount
FOOTPRINT AND SOLDERING PROFILES
Recommended footprint and soldering profiles. Please refer to data sheet “Chip resistors mounting”.
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PACKING STYLE
REEL AA0201 AA0402 AA0603 AA0805 AA1206 AA1210 AA1218 AA2010 AA2512
DIMENSION
Paper/PE taping reel
(R)
7" (178 mm)
10,000
10,000
5,000
5,000
5,000
5,000
---
---
---
13" (330 mm)
taping
7" (178 mm)
50,000
---
50,000
---
20,000
---
20,000
---
20,000
---
20,000
---
---
---
---
Embossed
reel (K)
4,000
4,000
4,000
NOTE
1. For paper/PE/embossed tape and reel specifications/dimensions, please refer to data sheet “Chip resistors packing”.
FUNCTIONAL DESCRIPTION
OPERATING TEMPERATURE RANGE
Range: -55 °C to +155 °C
POWER RATING
Each type rated power at 70 °C:
AA0201=1/20W (0.05W)
AA0402=1/16 W (0.0625W)
AA0603=1/10 W (0.1W)
AA0805=1/8 W (0.125W)
AA1206=1/4 W (0.25W)
AA1210=1/2 W (0.5W)
AA1218=1 W
Fig. 10 Maximum dissipation (P ) in percentage of rated power
AA2010=3/4 W (0.75W)
AA2512=1 W
max
as a function of the operating ambient temperature (T
)
amb
RATED VOLTAGE
The DC or AA (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
(
)
V = √ P X R
Or Maximum working voltage whichever is less
Where
(
)
( )
V = Continuous rated DC or AA rms working voltage V
(
)
P = Rated power W
( )
R = Resistance value Ω
www.yageo.com
Dec. 08 2015 V.3
Product specification
7
10
SERIES
0201 to 2512
AA
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
AEC-Q200 Test 3
High Temperature
Exposure
1,000 hours at TA = 155 °C, unpowered
±(1.0%+0.05Ω)
MIL-STD-202 Method 108
<50 mΩ for Jumper
AEC-Q200 Test 6
Moisture
Resistance
Each temperature / humidity cycle is defined at
8 hours (method 106F), 3 cycles / 24 hours for
10d. with 25 °C / 65 °C 95% R.H, without steps
7a & 7b, unpowered
±(0.5%+0.05Ω) for D/F tol.
±(2.0%+0.05Ω) for J tol.
<100 mΩ for Jumper
MIL-STD-202 Method 106
Parts mounted on test-boards, without
condensation on parts
AEC-Q200 Test 7
Biased
Humidity
1,000 hours; 85 °C / 85% RH
10% of operating power
±(3.0%+0.05Ω)
MIL-STD-202 Method 103
<100 mΩ for Jumper
Measurement at 24±4 hours after test conclusion.
AEC-Q200 Test 8
Operational Life
1,000 hours at 125 °C, derated voltage applied for ±(1.0%+0.05Ω)
1.5 hours on, 0.5 hour off, still-air required
MIL-STD-202 Method 108
<100 mΩ for Jumper
AEC-Q200 Test 15
Resistance to
Soldering Heat
Condition B, no pre-heat of samples
±(0.5%+0.05Ω) for D/F tol.
±(1.0%+0.05Ω) for J tol.
<50 mΩ for Jumper
MIL-STD-202 Method 210
Lead-free solder, 260± 5 °C, 10±1 seconds
immersion time
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
No visible damage
AEC-Q200 Test 16
Thermal Shock
-55/+125 °C
±(1.0%+0.05Ω)
MIL-STD-202 Method 107
Number of cycles is 300. Devices mounted
<50 mΩ for Jumper
Maximum transfer time is 20 seconds.
Dwell time is 15 minutes. Air – Air
AEC-Q200 Test 17
AEC-Q200-002
ESD
1 pos. + 1 neg. discharges
0201: 500V
±(3.0%+0.05Ω)
<50 mΩ for Jumper
0402/0603: 1KV
0805 and above: 2KV
www.yageo.com
Dec. 08 2015 V.3
Product specification
8
10
SERIES
0201 to 2512
AA
Chip Resistor Surface Mount
TEST
TEST METHOD
PROCEDURE
REQUIREMENTS
Solderability
- Wetting
Well tinned (≥95% covered)
AEC-Q200 Test 18
J-STD-002
Electrical Test not required Magnification 50X
SMD conditions:
No visible damage
(a) Method B, aging 4 hours at 155 °C dry heat,
dipping at 235±3 °C for 5±0.5 seconds.
(b) Method B, steam aging 8 hours, dipping at
215±3 °C for 5±0.5 seconds.
(c) Method D, steam aging 8 hours, dipping at
260±3 °C for 7±0.5 seconds.
AEC-Q200 Test 21
AEC-Q200-005
Board Flex
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
±(1.0%+0.05Ω )
<50 mΩ for Jumper
Bending for 0201/0402: 5 mm
0603/0805: 3 mm
1206 and above: 2 mm
Holding time: minimum 60 seconds
IEC 60115-1 4.8
MIL-STD-202 Method 304
Temperature
Coefficient of
At +25/–55 °C and +25/+125 °C
Refer to table 2
Resistance (T.C.R.)
Formula:
R2–R1
T.C.R= ------------------------- ×106 (ppm/°C)
R1(t2–t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
IEC60115-1 4.13
ASTM-B-809-95
Short Time
Overload
2.5 times of rated voltage or maximum
overload voltage whichever is less for 5 sec
at room temperature
±(1.0%+0.05Ω )
<50 mΩ for Jumper
- Sulfur (saturated vapor) 1000 hours,
90±2 °C unpowered
FOS
±(1.0%+0.05Ω)
±(4.0%+0.05Ω)
- Sulfur 750 hours, 105 °C. unpowered
ASTM-B-809-95*
*Modified
www.yageo.com
Dec. 08 2015 V.3
Product specification
9
10
SERIES
0201 to 2512
AA
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 3
Version 2
Version 1
Version 0
Dec. 08, 2015
Apr. 09, 2015
Jan. 27, 2015
Feb. 27, 2014
-
-
-
-
- Update Dielectric Withstanding Voltage
- Modified FOS test procedure
- Dimensions update
- First issue of this specification
www.yageo.com
Dec. 08 2015 V.3
Product specification
10
10
SERIES
0201 to 2512
AA
Chip Resistor Surface Mount
LEGAL DISCLAIMER
Yageo, its distributors and agents (collectively, “Yageo”), hereby disclaims any and all liabilities for any errors,
inaccuracies or incompleteness contained in any product related information, including but not limited to
product specifications, datasheets, pictures and/or graphics. Yageo may make changes, modifications and/or
improvements to product related information at any time and without notice.
Yageo makes no representation, warranty, and/or guarantee about the fitness of its products for any particular
purpose or the continuing production of any of its products. To the maximum extent permitted by law, Yageo
disclaims (i) any and all liability arising out of the application or use of any Yageo product, (ii) any and all
liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied
warranties, including warranties of fitness for a particular purpose, non-infringement and merchantability.
Yageo statements regarding the suitability of products for certain types of applications are based on Yageo’s
knowledge of typical operating conditions for such types of applications in a generic nature. Such statements
are neither binding statements of Yageo nor intended to constitute any warranty concerning the suitability for a
specific customer application or use. They are intended for use only by customers with requisite knowledge and
experience for determining whether Yageo products are the correct products for their application or use. In
addition, unpredicatable and isolated cases of product failure may still occur, therefore, customer application or
use of Yageo products which requires higher degree of reliability or safety, shall employ additional protective
safeguard measures to ensure that product failure would not result in personal injury or property damage.
Yageo products are not designed for application or use in medical, life-saving, or life-sustaining devices or for
any other application or use in which the failure of Yageo products could result in personal injury or death.
Customers using or selling Yageo products not expressly indicated for above-mentioned purposes shall do so at
their own risk and agree to fully indemnify Yageo and hold Yageo harmless.
Information provided here is intended to indicate product specifications only. Yageo reserves all the rights for
revising this content without further notification, as long as products are unchanged. Any product change will
be announced by PCN.
www.yageo.com
Dec. 08 2015 V.3
AA0402DK-131R 相关器件
型号 | 制造商 | 描述 | 价格 | 文档 |
AA0402DK-131R5 | YAGEO | ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE | 获取价格 | |
AA0402DK-131R5L | YAGEO | ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE | 获取价格 | |
AA0402DK-131RL | YAGEO | ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE | 获取价格 | |
AA0402DK-13976R | YAGEO | ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE | 获取价格 | |
AA0402DK-13976RL | YAGEO | ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE | 获取价格 | |
AA0402DK-139K76 | YAGEO | ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE | 获取价格 | |
AA0402DK-139K76L | YAGEO | ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE | 获取价格 | |
AA0402DK-139M76 | YAGEO | ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE | 获取价格 | |
AA0402DK-139M76L | YAGEO | ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE | 获取价格 | |
AA0402DK-139R76 | YAGEO | ANTI-SULFURATED CHIP RESISTORS AUTOMOTIVE GRADE | 获取价格 |
AA0402DK-131R 相关文章
- 2024-09-20
- 5
- 2024-09-20
- 8
- 2024-09-20
- 8
- 2024-09-20
- 6