5KP210CA/TR13 [YAGEO]

Trans Voltage Suppressor Diode,;
5KP210CA/TR13
型号: 5KP210CA/TR13
厂家: YAGEO CORPORATION    YAGEO CORPORATION
描述:

Trans Voltage Suppressor Diode,

二极管
文件: 总8页 (文件大小:498K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
DATA SHEET  
TRANSIENT VOLTAGE SUPPRESSORS  
AC/DC POWER SUPPLY  
5KP series  
RoHS compliant & Halogen free  
Circuit Protection  
Product Specification  
2
8
5KP  
Transient Voltage Suppressors  
Transient Voltage Suppressors (TVS) Data Sheet  
Features  
Glass passivated junction  
Low incremental surge resistance.  
Excellent clamping capability  
5000W peak pulse power capability at 10/1000μs waveform,  
repetition rate (duty cycle): 0.05%  
Fast response time  
Typical IR less than 2μA above 10V.  
High Temperature soldering guaranteed: 265/10 seconds/.375,  
(9.5mm) lead length, 5lbs (2.3kg) tension  
Plastic package has underwriters laboratory flammability 94V-0  
Meets MSL level 1, per J-STD-020.  
Safety certification: UL: E244458  
Mechanical Data  
Case: Moulded plastic over glass passivated junction  
Terminal: Plated Axial leads, solderable per MIL-STD-750, Method 2026  
Polarity: Color band denotes cathode except bi-directional models  
Mounting Position: Any  
Weight: 2.10g  
Applications  
I/O interface  
AC/DC power supply  
Low frequency signal transmission line (RS232, RS485, etc.)  
Maximum Ratings and Characteristics  
Ratings at 25ambient temperature unless otherwise specified.  
Rating  
Symbol  
PPPM  
Value  
Units  
Peak pulse power dissipation at 10/1000μs waveform  
Minimum 5000  
Watts  
(Note1, Fig.1)  
Peak pulse current of at 10/1000μs waveform (Note 1, Fig.3)  
Steady state power dissipation at TL=75(Fig.5)  
IPPM  
See Table  
8.0  
Amps  
Watts  
PM(AV)  
Peak forward surge current, 8.3ms single half sine-wave  
superimposed on rated load, (JEDEC Method) (Note2, Fig.6)  
IFSM  
400  
Amps  
Operating junction and Storage Temperature Range.  
Typical thermal resistance junction to lead  
TJ,TSTG  
RθJL  
-55 to +175  
8
/W  
/W  
Typical thermal resistance junction to ambient  
RθJA  
40  
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25per Fig.2.  
2. 8.3ms single half sine-wave, or equivalent square wave, duty cycle=4 pulses per minutes maximum.  
www.yageo.com  
Apr. 29, 2019 V.0  
Circuit Protection  
Product Specification  
3
8
5KP  
Transient Voltage Suppressors  
Dimensions (P600)  
Millimeters  
Inches  
Symbol  
d
Min.  
Max.  
-
Min.  
Max.  
-
Cathode Band  
DIA.  
s
DIA.  
L
T
d
s
25.40  
8.60  
8.60  
1.19  
1.000  
0.340  
0.340  
0.047  
9.10  
9.10  
1.32  
0.360  
0.360  
0.052  
T
L
L
Part Number Code  
5KP XXX C A  
5% VBR Voltage Tolerance  
Bidirectional  
VRWM Voltage  
Series Code  
Ordering Code for different package  
Box package: Add suffix “/B” at the end of the part number, such as 5KP15A/B  
Reel package: Add suffix /TR13at the end of the part number, such as 5P100CA/TR13  
Electrical Characteristics (TA=25)  
Reverse  
Stand-Off  
Voltage  
Breakdown  
Voltage  
@IT  
Maximum  
Clamping  
Peak  
Pulse  
Reverse  
Leakage  
@VRWM  
Test  
Part Number  
Current  
Voltage @IPP Current  
Unidirectional  
Bidirectional  
5KP5.0CA  
5KP6.0CA  
5KP6.5CA  
5KP7.0CA  
5KP7.5CA  
5KP8.0CA  
5KP8.5CA  
5KP9.0CA  
5KP10CA  
5KP11CA  
VRWM(V)  
5.0  
VBR(V)  
IT(mA)  
VC(V)  
9.2  
IPP(A)  
554.3  
495.1  
455.4  
425.0  
395.3  
375.0  
354.2  
331.2  
300.0  
280.2  
IR(μA)  
5000  
5000  
2000  
1000  
250  
150  
50  
5KP5.0A  
5KP6.0A  
5KP6.5A  
5KP7.0A  
5KP7.5A  
5KP8.0A  
5KP8.5A  
5KP9.0A  
5KP10A  
5KP11A  
6.40~7.00  
6.67~7.37  
7.22~7.98  
7.78~8.60  
8.33~9.21  
8.89~9.83  
9.44~10.40  
10.00~11.10  
11.10~12.30  
12.20~13.50  
50  
50  
50  
50  
5
6.0  
10.3  
11.2  
12.0  
12.9  
13.6  
14.4  
15.4  
17.0  
18.2  
6.5  
7.0  
7.5  
8.0  
5
8.5  
5
9.0  
5
20  
10.0  
11.0  
5
15  
5
2
www.yageo.com  
Apr. 29, 2019 V.0  
Circuit Protection  
Product Specification  
4
8
5KP  
Transient Voltage Suppressors  
Electrical Characteristics (TA=25)  
Reverse  
Breakdown  
Voltage  
@IT  
Maximum  
Clamping  
Peak  
Pulse  
Reverse  
Test  
Part Number  
Stand-Off  
Voltage  
Leakage  
@VRWM  
Current  
Voltage @IPP Current  
Unidirectional  
Bidirectional  
5KP12CA  
5KP13CA  
5KP14CA  
5KP15CA  
5KP16CA  
5KP17CA  
5KP18CA  
5KP20CA  
5KP22CA  
5KP24CA  
5KP26CA  
VRWM(V)  
12.0  
13.0  
14.0  
15.0  
16.0  
17.0  
18.0  
20.0  
22.0  
24.0  
26.0  
VBR(V)  
IT(mA)  
VC(V)  
19.9  
21.5  
23.2  
24.4  
26.0  
27.6  
29.2  
32.4  
35.5  
38.9  
42.1  
IPP(A)  
256.3  
237.2  
219.8  
209.0  
196.2  
184.8  
174.7  
157.4  
143.7  
131.1  
121.1  
IR(μA)  
5KP12A  
5KP13A  
5KP14A  
5KP15A  
5KP16A  
5KP17A  
5KP18A  
5KP20A  
5KP22A  
5KP24A  
5KP26A  
13.30~14.70  
14.40~15.90  
15.60~17.20  
16.70~18.50  
17.80~19.70  
18.90~20.90  
20.00~22.10  
22.20~24.50  
24.40~26.90  
26.70~29.50  
28.90~31.90  
5
5
5
5
5
5
5
5
5
5
5
2
2
2
2
2
2
2
2
2
2
2
Reverse  
Stand-Off  
Voltage  
Breakdown  
Voltage  
@IT  
Maximum  
Clamping  
Peak  
Pulse  
Reverse  
Leakage  
@VRWM  
Test  
Part Number  
Current  
Voltage @IPP Current  
Unidirectional  
5KP28A  
5KP30A  
5KP33A  
5KP36A  
5KP40A  
5KP43A  
5KP45A  
5KP48A  
5KP51A  
5KP54A  
5KP58A  
5KP60A  
5KP64A  
5KP70A  
5KP75A  
5KP78A  
Bidirectional  
5KP28CA  
5KP30CA  
5KP33CA  
5KP36CA  
5KP40CA  
5KP43CA  
5KP45CA  
5KP48CA  
5KP51CA  
5KP54CA  
5KP58CA  
5KP60CA  
5KP64CA  
5KP70CA  
5KP75CA  
5KP78CA  
VRWM(V)  
28.0  
30.0  
33.0  
36.0  
40.0  
43.0  
45.0  
48.0  
51.0  
54.0  
58.0  
60.0  
64.0  
70.0  
75.0  
78.0  
VBR(V)  
IT(mA)  
VC(V)  
45.4  
48.4  
53.3  
58.1  
64.5  
69.4  
72.7  
77.4  
82.4  
87.1  
93.6  
96.8  
103.0  
113.0  
121.0  
126.0  
IPP(A)  
112.3  
105.4  
95.7  
87.8  
79.1  
73.5  
70.2  
65.9  
61.9  
58.6  
54.5  
52.7  
49.5  
45.1  
42.1  
40.5  
IR(μA)  
31.10~34.40  
33.30~36.80  
36.70~40.60  
40.00~44.20  
44.40~49.10  
47.80~52.80  
50.00~55.30  
53.30~58.90  
56.70~62.70  
60.00~66.30  
64.40~71.20  
66.70~73.70  
71.10~78.60  
77.80~86.00  
83.30~92.10  
86.70~95.80  
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
www.yageo.com  
Apr. 29, 2019 V.0  
Circuit Protection  
Product Specification  
5
8
5KP  
Transient Voltage Suppressors  
Electrical Characteristics (TA=25)  
Reverse  
Breakdown  
Voltage  
@IT  
Maximum  
Clamping  
Peak  
Pulse  
Reverse  
Test  
Part Number  
Stand-Off  
Voltage  
Leakage  
@VRWM  
Current  
Voltage @IPP Current  
Unidirectional  
Bidirectional  
5KP85CA  
VRWM(V)  
85.0  
VBR(V)  
IT(mA)  
VC(V)  
137.0  
146.0  
162.0  
177.0  
193.0  
209.0  
243.0  
259.0  
275.0  
292.0  
310.0  
329.2  
349.5  
371.1  
425.0  
IPP(A)  
37.2  
34.9  
31.5  
28.8  
26.4  
24.4  
21.0  
19.7  
18.5  
17.5  
16.5  
15.5  
14.6  
13.7  
12.0  
IR(μA)  
5KP85A  
5KP90A  
94.40~104.00  
100.00~111.00  
110.00~123.00  
122.00~135.00  
133.00~147.00  
144.00~159.00  
167.00~185.00  
178.00~197.00  
189.00~209.00  
201.00~222.00  
211.00~233.00  
224.00~247.00  
237.00~263.00  
246.00~272.00  
277.00~306.00  
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
5KP90CA  
90.0  
5KP100A  
5KP110A  
5KP120A  
5KP130A  
5KP150A  
5KP160A  
5KP170A  
5KP180A  
5KP190A  
5KP200A  
5KP210A  
5KP220A  
5KP250A  
5KP100CA  
5KP110CA  
5KP120CA  
5KP130CA  
5KP150CA  
5KP160CA  
5KP170CA  
5KP180CA  
5KP190CA  
5KP200CA  
5KP210CA  
5KP220CA  
5KP250CA  
100.0  
110.0  
120.0  
130.0  
150.0  
160.0  
170.0  
180.0  
190.0  
200.0  
210.0  
220.0  
250.0  
Notes: For bidirectional type having VRWM of 10V and less, the IR limit is double.  
Ratings and Characteristic Curves (TA=25unless otherwise noted)  
Figure 1. Peak Pulse Power Rating Curve  
Figure 2. Pulse Derating Curve  
100  
100  
75  
50  
10  
1
25  
0
0.1  
0
25 50  
75 100 125 150 175 200  
0.1  
1
10  
100  
1000  
10000  
TA-Ambient Temperature ()  
td-Pulse Width (µs)  
www.yageo.com  
Apr. 29, 2019 V.0  
Circuit Protection  
Product Specification  
6
8
5KP  
Transient Voltage Suppressors  
Figure 3. Pulse Waveform  
Figure 4. Typical Junction Capacitance  
150  
100  
50  
100000  
TJ=25  
tr=10µs  
Pulse Width(td) is defined as  
the point where the peak  
current decays to 50% of IPPM  
Bi-directional V=0V  
10000  
1000  
Uni-directional V=0V  
Peak Value IPPM  
Uni-directional @VR  
Half Value IPPM (IPPM/2)  
100  
10  
1
Bi-directional @VR  
10/1000µs Waveform  
as defined by R.E.A  
TJ=25  
f=1.0MHz  
Vsig=50mVp-p  
td  
0
1
10  
100  
1000  
0
1.0  
2.0  
3.0  
4.0  
VBR-Reverse Breakdown Voltage (V)  
t-Time (ms)  
Figure 5. Steady State Power Dissipation Derating  
Curve  
Figure 6. Maximum Non-Repetitive Forward  
Surge Current Uni-Directional Only  
9
8
7
6
5
4
450  
400  
350  
300  
250  
200  
150  
100  
50  
3
L= 0.375(9.5mm)  
Lead Lengths  
2
1
0
0
1
10  
100  
200  
75 100 125 150 175  
0
25  
50  
Number of Cycles at 60Hz  
TL-Lead Temperature ()  
www.yageo.com  
Apr. 29, 2019 V.0  
Circuit Protection  
Product Specification  
7
8
5KP  
Transient Voltage Suppressors  
Recommended Soldering Conditions  
Wave Soldering  
300  
Soldering  
Cooling  
Preheating  
Maximum Wave 265  
250  
200  
150  
100  
50  
0
0
0.5  
1
1.5  
2
2.5  
3
3.5  
4
Time (minutes)  
Item  
Conditions  
265℃  
Peak Temperature  
Dipping Time  
Soldering  
10 seconds  
1 time  
Marking Code  
Cathode Band  
YXXX  
5KP5.0A  
YXXX  
Logo  
Date Code  
Marking Code  
Logo  
Date Code  
5KP5.0CA  
Marking Code  
www.yageo.com  
Apr. 29, 2019 V.0  
Circuit Protection  
Product Specification  
8
8
5KP  
Transient Voltage Suppressors  
Packaging  
Tape  
Symbol  
A
Dimension (mm)  
10.0±0.5  
Z
±5°  
A
E
B
Z
53.0±1.0  
1.2Max.  
6.0±0.4  
L1  
L2  
B
T
T
E
0.8Max.  
1.0Max.  
250.0±5.0  
75.0±5.0  
114.0±5.0  
E
L1-L2  
L
Box  
W
H
H
L
W
Quantity: 300PCS  
Reel  
D
330.0±3.0  
16.4±2.0  
86.0±2.0  
76.0±3.0  
D0  
D0  
D1  
D1  
W1  
W1  
D
Quantity: 800PCS  
www.yageo.com  
Apr. 29, 2019 V.0  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY