232280673161L [YAGEO]
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 316ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT;型号: | 232280673161L |
厂家: | YAGEO CORPORATION |
描述: | Fixed Resistor, Metal Glaze/thick Film, 0.05W, 316ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT |
文件: | 总9页 (文件大小:423K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
GENERAL PURPOSE CHIP RESISTORS
RC0201
5%, 1%, 0.5%
RoHS compliant & Halogen free
Product specification
2
9
SERIES
0201
RC
Chip Resistor Surface Mount
SCOPE
ORDERING INFORMATION - GLOBAL PART NUMBER & 12NC
This specification describes
RC0201 series chip resistors
with lead-free terminations made
by thick film process.
Both part numbers are identified by the series, size, tolerance, packing
type, temperature coefficient, taping reel and resistance value.
YAGEO BRAND ordering code
(
)
GLOBAL PART NUMBER PREFERRED
RC0201 X R - XX XXXX L
APPLICATIONS
( ) ( ) ( ) ( )
( )
5
( )
6
1
2
3
4
All general purpose application
( )
1 TOLERANCE
D = ±0.5%
F = ±1%
FEATURES
Halogen Free Epoxy
J = ±5% (for Jumper ordering, use code of J)
RoHS compliant
( )
2 PACKAGING TYPE
-
-
Products with lead free
terminations meet RoHS
requirements.
R = Paper / PE taping reel
( )
3 TEMPERATURE COEFFICIENT OF RESISTANCE
Pb-glass contained in electrodes,
resistor element and glass are
exempted by RoHS.
– = Based on spec.
( )
4 TAPING REEL
Reduce environmentally
07 = 7 inch dia. Reel
hazardous wastes
7C = 7 inch dia. Reel, 1.5 x Standard Quantity
High component and equipment
7D = 7 inch dia. Reel, 2 x Standard Quantity
13 = 13 inch dia. Reel
reliability
Save of PCB space
( )
5 RESISTANCE VALUE
None forbidden-materials used
There are 2~4 digits indicated the resistance value. Letter R/K/M is decimal point, no
need to mention the last zero after R/K/M, e.g.1K2, not 1K20.
in products/production.
Detailed coding rules of resistance are shown in the table of “Resistance rule of global
part number”.
(6) DEFAULT CODE
Letter L is system default code for ordering only. (Note)
Resistance rule of global part
number
O
RDERING EXAMPLE
The ordering code of a RC0201
chip resistor, value 56 X with
±1% tolerance, supplied in 7-inch
tape of 15,000 units per reel is:
RC0201FR-7C56RL.
Resistance code rule
Example
D1
0R
D1 = Dummy
0R = Jumper
1R = 1 Ω
1R5 = 1.5 Ω
9R76 = 9.76 Ω
XRXX
(1 to 9.76 Ω)
NOTE
1. All our RSMD products meet RoHS
compliant and Halogen Free. "LFP" of
the internal 2D reel label mentions
"Lead Free Process".
XXRX
10R = 10 Ω
(10 to 97.6 Ω)
97R6 = 97.6 Ω
XXXR
(100 to 976 Ω)
100R = 100 Ω
2. On customized label, "LFP" or specific
symbol can be printed.
XKXX
1K = 1,000 Ω
(1 to 9.76 KΩ)
9K76 = 9760 Ω
XMXX
1M = 1,000,000 Ω
(1 to 9.76 MΩ)
9M76= 9,760,000 Ω
www.yageo.com
May 02, 2011 V.8
Product specification
3
9
SERIES
0201
RC
Chip Resistor Surface Mount
PHYCOMP BRAND ordering codes
Both GLOBAL PART NUMBER (preferred) and 12NC (traditional) codes are acceptable to order Phycomp
brand products.
(
)
GLOBAL PART NUMBER PREFERRED
For detailed information of GLOBAL PART NUMBER and ordering example, please refer to page 2.
12NC CODE
2322
(1)
XXX XXXXX L
Last digit of 12NC
Resistance decade (3)
( )
(2)
(3)
4
Last digit
PAPER / PE TAPE ON REEL (units) (2)
X
0.01 to 0.0976
0
7
8
9
1
2
3
4
5
6
TYPE/ START TOL. RESISTANCE
0201 IN (1)
(%) RANGE
X
0.1 to 0.976
10,000
20,000
806 80xxx
806 8xxxx
---
50,000
803 60xxx
806 6xxxx
---
X
1 to 9.76
RC41
2322
±5% 1 to 1 MΩ
±1% 1 to 1 MΩ
803 70xxx
806 7xxxx
803 91001
803 93001
X
10 to 97.6
100 to 976
1 to 9.76 K
RC42 2322
Jumper 2322
Dummy 2322
X
-
-
0 Ω
X
-
---
---
X
10 to 97.6 K
(1) The resistors have a 12-digit ordering code starting with 2322.
X
100 to 976 K
(2) The subsequent 4 or 5 digits indicate the resistor tolerance and
packaging.
X
1 to 9.76 M
X
10 to 97.6 M
(3) The remaining 4 or 3 digits represent the resistance value with the
last digit indicating the multiplier as shown in the table of
“Last digit of 12NC”.
X
X
Example: 0.02
=
=
=
=
=
0200 or 200
3007 or 307
1008 or 108
3303 or 333
1006 or 106
X
0.3
X
1
(Note)
(4) Letter L is system default code for order only.
33 K
10 M
O
RDERING EXAMPLE
X
The ordering code of a RC42 resistor, value 56 X with ±1% tolerance,
supplied in tape of 10,000 units per reel is: 232280675609L or
RC0201FR-0756RL.
NOTE
1. All our RSMD products meet RoHS compliant and Halogen Free. "LFP" of the internal 2D reel label mentions "Lead Free Process".
2. On customized label, "LFP" or specific symbol can be printed.
www.yageo.com
May 02, 2011 V.8
Product specification
4
9
SERIES
0201
RC
Chip Resistor Surface Mount
MARKING
RC0201
No marking
ynsc007
Fig. 1
For further marking information, please refer to data sheet “Chip resistors marking”.
CONSTRUCTION
OUTLINES
The resistor is constructed on
top of a high-grade ceramic body.
Internal metal electrodes are
added on each end to make the
contacts to the thick film resistive
element. The composition of the
resistive element is a noble metal
imbedded into a glass and
For dimension, please refer to Table 1
overcoat
protective glass
resistive layer
(Jumper chip is a conductor)
inner electrode
H
termination(Ni/matte tin)
inner electrode
ceramic substrate
covered by a second glass to
prevent environment influences.
The resistor is laser trimmed to
the rated resistance value. The
resistor is covered with a
I
2
overcoat
I
1
protective epoxy coat, finally the
two external terminations (matte
tin on Ni-barrier) are added, as
shown in Fig.2.
W
YNSC056
L
DIMENSIONS
Table 1
TYPE
Fig. 2 Chip resistor outlines
RC0201
L (mm)
W (mm)
H (mm)
I1 (mm)
I2 (mm)
0.60 ±0.03
0.30 ±0.03
0.23 ±0.03
0.10 ±0.05
0.15 ±0.05
www.yageo.com
May 02, 2011 V.8
Product specification
5
9
SERIES
0201
RC
Chip Resistor Surface Mount
ELECTRICAL CHARACTERISTICS
FOOTPRINT AND SOLDERING
PROFILES
Table 2
For recommended footprint and
soldering profiles, please refer to
data sheet “Chip resistors
mounting”.
RC0201 1/20 W
CHARACTERISTICS
Operating Temperature Range
Maximum Working Voltage
Maximum Overload Voltage
Dielectric Withstanding Voltage
–55 °C to +125 °C
25 V
50 V
50 V
5% (E24) 1 Ω to 10 MΩ
1% (E24/E96) 1 Ω to 10 MΩ
0.5% (E24/E96) 10 Ω to 1 MΩ
Jumper < 0.05 Ω
Resistance Range
1 Ω ≤ R ≤ 10 Ω -100/+350 ppm/°C
Temperature Coefficient
Jumper Criteria
10 Ω < R ≤ 10 MΩ
Rated Current
±200 ppm/°C
0.5 A
Maximum Current
1.0 A
PACKING STYLE AND PACKAGING QUANTITY
Table 3 Packing style and packaging quantity
PRODUCT TYPE
RC0201
PACKING STYLE
REEL DIMENSION
QUANTITY PER REEL
Paper / PE Taping Reel (R)
7" (178 mm)
10,000/15,000/20,000 units
50,000 units
13" (330 mm)
NOTE
1. For paper/PE tape and reel specification/dimensions, please refer to data sheet “Chip resistors packing”.
2. For size of 0201, standard quantity is 10,000 units per reel.
FUNCTIONAL DESCRIPTION
POWER RATING
handbook, halfpage
RC0201 rated power at 70°C is 1/20 W
MLB206_1
P
(%P
rated
)
R
ATED VOLTAGE
100
50
0
The DC or AC (rms) continuous working voltage
corresponding to the rated power is determined by
the following formula:
V=√(P X R)
or max. working voltage whichever is less
55
0
50 70
100
T
125
o
(
C)
amb
Where
Fig. 3 Maximum dissipation (P) in percentage of rated power as a
function of the operating ambient temperature (T
V=Continuous rated DC or
AC (rms) working voltage (V)
)
amb
P=Rated power (W)
R=Resistance value (X)
www.yageo.com
May 02, 2011 V.8
Product specification
6
9
SERIES
0201
RC
Chip Resistor Surface Mount
TESTS AND REQUIREMENTS
Table 4 Test condition, procedure and requirements
TEST
TEST METHOD
IEC 60115-1 4.8
PROCEDURE
REQUIREMENTS
Temperature
Coefficient of
Resistance
(T.C.R.)
At +25/–55 °C and +25/+125 °C
Refer to table 2
Formula:
R2–R1
T.C.R= ------------------------- ×106 (ppm/°C)
R1(t2–t1)
Where
t1=+25 °C or specified room temperature
t2=–55 °C or +125 °C test temperature
R1=resistance at reference temperature in ohms
R2=resistance at test temperature in ohms
IEC 60115-1 4.25.1
Life/Endurance
At 70±5 °C for 1,000 hours, RCWV applied for
1.5 hours on, 0.5 hour off, still air required
±(1.0%+0.05 Ω)
for 1%, 0.5% tol.
±(3.0%+0.05 Ω
for 5% tol.
<100 mΩ for Jumper
IEC 60068-2-2
High
1,000 hours at 125±5 °C, unpowered
±(1.0%+0.05 Ω)
Temperature
Exposure/
Endurance at
Upper Category
Temperature
for 1%, 0.5% tol.
±(2.0%+0.05 Ω)
for 5% tol.
<50 mΩ for Jumper
MIL-STD-202G Method-106G
Moisture
Resistance
Each temperature / humidity cycle is defined at 8
hours, 3 cycles / 24 hours for 10d. with 25 °C /
65 °C 95% R.H, without steps 7a & 7b,
unpowered
±(0.5%+0.05 Ω)
for 1%, 0.5% tol.
±(2.0%+0.05 Ω)
for 5% tol.
Parts mounted on test-boards, without
condensation on parts
<100 mΩ for Jumper
Measurement at 24±2 hours after test conclusion
MIL-STD-202G Method-107G
Thermal Shock
-55/+125 °C
±(0.5%+0.05 Ω)
for 1%, 0.5% tol.
Number of cycles required is 300. Devices
unmounted
±(1%+0.05 Ω)
for 5% tol.
Maximum transfer time is 20 seconds.
Dwell time is 15 minutes. Air – Air
<50 mΩ for Jumper
www.yageo.com
May 02, 2011 V.8
Product specification
7
9
SERIES
0201
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC60115-1 4.13
PROCEDURE
REQUIREMENTS
Short Time
Overload
2.5 times of rated voltage or maximum overload
voltage whichever is less for 5 sec at room
temperature
±(1.0%+0.05 Ω)
for 1%, 0.5% tol.
±(2.0%+0.05 Ω)
for 5% tol.
<50 mΩ for Jumper
No visible damage
IEC 60068-2-21
IEC 60068-2-1
Board Flex/
Bending
Chips mounted on a 90mm glass epoxy resin
PCB (FR4)
±(1.0%+0.05 Ω)
<50 mΩ for Jumper
No visible damage
5 mm bending
Bending time: 60±5 seconds
Low
Temperature
Operation
The resistor shall be subjected to a DC rated
voltage for 1.5 h-on, 0.5 h-off, at -55±3 °C
±(0.5%+0.05 Ω)
for 1%, 0.5% tol.
This constitutes shall be repeated for 96 hours
±(1.0%+0.05 Ω)
for 5% tol.
However the applied voltage shall not exceed
the maximum operating voltage
No visible damage
IEC 60115-1 4.6
IEC 60115-1 4.7
Insulation
Resistance
Rated continuous overload voltage (RCOV)
for 1 minute
≥10 GΩ
RC0201
Type
Voltage (DC)
50 V
Dielectric
Withstand
Voltage
Maximum voltage (Vrms) applied for 1 minute
No breakdown or flashover
RC0201
Type
Voltage (AC)
50 Vrms
IPC/JEDEC J-STD-020D
IEC 60115-1 4.12
Resistance to
Solvent
lsopropylalcohol (C3H7OH) followed by
brushing
No smeared
Noise
Maximum voltage (Vrms) applied
Value
10 dB
Resistors range
R < 100 Ω
100 Ω ≤ R < 1 KΩ
20 dB
30 dB
40 dB
46 dB
48 dB
1 KΩ ≤ R < 10 KΩ
10 KΩ ≤ R < 100 KΩ
100 KΩ ≤ R < 1 MΩ
1 MΩ ≤ R ≤ 22 MΩ
www.yageo.com
May 02, 2011 V.8
Product specification
8
9
SERIES
0201
RC
Chip Resistor Surface Mount
TEST
TEST METHOD
IEC 60115-1 4.21
PROCEDURE
REQUIREMENTS
Humidity
Steady state for 1000 hours at 40 °C / 95%
R.H. RCWV applied for 1.5 hours on and
0.5 hour off
±(1.0%+0.05 Ω)
for 1%, 0.5% tol.
±(2.0%+0.05 Ω)
for 5% tol.
<100 mΩ for Jumper
IEC 60115-1 4.39
Intermittent
Overload
2.5 times of rated voltage or maximum
overload voltage whichever is less for 1 second
on and 25 seconds off; total 10,000 cycles
±(1.0%+0.05 Ω)
for 1%, 0.5% tol.
±(2.0%+0.05 Ω)
for 5% tol.
<100 mΩ for Jumper
Solderability
- Wetting
Well tinned (≥95% covered)
IPC/JEDEC J-STD-002B test B
Electrical Test not required
Magnification 50X
No visible damage
SMD conditions:
1st step: method B, aging 4 hours at 155 °C
dry heat
2
nd step: lead-free solder bath at 245±3 °C
Dipping time: 3±0.5 seconds
IPC/JEDEC J-STD-002B test D
- Leaching
Lead-free solder, 260 °C, 30 seconds
immersion time
No visible damage
IEC 60068-2-58
- Resistance to
Soldering Heat
Condition B, no pre-heat of samples
±(0.5%+0.05 Ω)
for 1%, 0.5% tol.
Lead-free solder, 260 °C, 10 seconds
immersion time
±(1.0%+0.05 Ω)
for 5% tol.
Procedure 2 for SMD: devices fluxed and
cleaned with isopropanol
<50 mΩ for Jumper
No visible damage
www.yageo.com
May 02, 2011 V.8
Product specification
9
9
SERIES
0201
RC
Chip Resistor Surface Mount
REVISION HISTORY
REVISION DATE
CHANGE NOTIFICATION DESCRIPTION
Version 8
May 02, 2011
-
- Add ±0.5% tolerance for RC0201
- Add new taping reel code of 7 inch dia. reel with 1.5 x standard quantity
(15,000 units per reel)
- 10" taping reel removed
Version 7
Version 6
Jan 06, 2011
Apr 27, 2010
-
-
- Typo updated
- Updated test items and methods
- Add new taping reel code of 7 inch dia. reel with double standard
quantity (20,000 units per reel)
Version 5
Nov 10, 2009
-
- Test items and methods updated
- Test requirements upgraded
- Resistance range extend
Version 4
Version 3
Jul 15, 2008
-
-
- Description of "Halogen Free Epoxy" added
- Define global part number
Apr 25, 2007
- New datasheet for 0201 thick film 1% and 5% with lead-free terminations
- Replace the 0201 part of pdf files: Pu-RC0201_51_PbFree_L_2 and Yu-
RC0201_51_PbFree_L_2
- Max. working voltage, resistance rage, and TCR updated
- Tests and Requirements updated
Version 2
Sep 03, 2004
-
- New datasheet for 0201 thick film 1% and 5% with lead-free terminations
- Replace the 0201 part of pdf files: RC41_5_4, RC42_1_1
- Test method and procedure updated
- PE tape added (paper tape will be replaced by PE tape)
“ Yageo reserves all the rights for revising the content of this datasheet without further notification, as long as the products itself are unchanged. Any
product change will be announced by PCN.”
www.yageo.com
May 02, 2011 V.8
相关型号:
232280673169L
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 31.6ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
232280673240
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 324ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
232280673241
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 324ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
232280673241L
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 324ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
232280673242L
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 3240ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
232280673248
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 3.24ohm, 25V, 1% +/-Tol, 350ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
232280673248L
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 3.24ohm, 25V, 1% +/-Tol, 350ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
2322806732R4
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 32.4ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
232280673300
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 330ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
232280673303
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 33000ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
232280673304
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 330000ohm, 25V, 1% +/-Tol, 200ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
232280673308
Fixed Resistor, Metal Glaze/thick Film, 0.05W, 3.3ohm, 25V, 1% +/-Tol, 350ppm/Cel, Surface Mount, 0201, CHIP, ROHS COMPLIANT
YAGEO
©2020 ICPDF网 联系我们和版权申明