310A405F3 [WINCHESTER]
Specifications for BNC Connectors;
| 型号： | 310A405F3 |
| 厂家： | 
Winchester Electronics Corporation |
| 描述： | Specifications for BNC Connectors 连接器 |
| 文件： | 总11页 (文件大小：454K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
Specifications for BNC Connectors
BNC style connectors are miniature, light-weight, weatherproof interconnecting devices characterized by their two-stud, quick disconnect bayonet lock
coupling arrangement. Their design functions satisfactorily from DC to 11 GHz in static applications, or from DC to 4GHz in applications involving
vibration. The connectors typically yield a low VSWR (reflected signal) to 4GHz. Primary applications include radio telecommunications, broadcast
equipment, medical equipment, computer, Precision Video, High definition studio broadcast, video switching and test instrumentation where frequent
coupling and de-coupling are necessary. Bomar’s BNCs are available in an extensive variety of configurations and cable sizes and are impedance
matched to either 50 ohm or 75 ohm.
MATERIALS
Connector Parts
Connector Body and Parts
Male Contact Pin
Commercial Grade
Outer Contact
Material
Equivalent Standard
ISOCuZn38Pb2 Body Part
QQ-B-626
Brass
Brass
Zinc Alloy/Brass
Brass
--------------
QQ-B-750
Socket Contact
Beryllium Copper
Phosphor Copper
Annealed Copper
Teflon
QQ-C-530 / MIL-H-7199
CuBe2
----------
Crimp Ferrule
QQ-C-576
Insulators, Standard Versions
----------
L-P403 / BS4271
Grade B
Delrin
Rubber Gaskets
Plating
Silicone Rubber
Nickel (Silver Optional)
ASTM-E1418PSI
MIL-G-45204
ELECTRICAL
Requirement
Performance
Test † Specification
Impedance
50
75
Frequency Range
VSWR
0-4GHz
0-1 GHz
------------
1.30 Max.
MIL-C-39012
RF Insertion Loss
0.2 db Min. at 3 GHz
-55 db Min. at 3 GHz
1500V rms
MIL-C-39012
MIL-C-39012
MIL-STD-202
MIL-STD-202
MIL-STD-202
MIL-C-39012
RF Leakage
Test Voltage ( At Sea Level)
Working Voltage ( At Sea Level )
Insulation Resistance
Contact Resistance
500V rms
5000 Meg ohms Min.
3 Milli ohms Max.
MECHANICAL & ENVIRONMENTAL
Requirement
Performance
500 Insertions & Extractions Min.
50 G
Test † Specification
MIL-C-39012
MIL-STD-202
MIL-STD-202
MIL-C-39012
MIL-C-39012
------------
Durability
Shock
Vibration
20 G from 80-2000 Hz
60 lbs. Minimum Pull Test
60 lbs. Maximum
Cable Retention (Cable Types)
Coupling Nut
Teflon: -55 to +199 C
Delrin: -40 to +85 C
Continuous Test
Temperature Range
------------
Moisture Resistance
Salt Spray
MIL-STD-202
MIL-STD-202
48 Hours
†Products are made to conform to the Mil standard but are for commercial applications and are not QPL
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX973-347-2111
Back to Index
1
-Page1-
-Page2-
BNC 3 Piece Crimp
BNC three piece crimp connectors feature semi-captive contacts that “click” into place assuring perfect installation. Each crimp pin has a vent hole for optional
soldering. Soldering is recommended for all stranded conductors 26 AWG or smaller.
Part Number
(Male)
(I.D.)
**
Fig. No.
RG/U Cable
310A205A
310A205A18
310A205F
310A205FS
310A205FV
.200 In. Fig. 1 6, 21 AWG Center Conductor
.200 In. Fig. 1 6 CATV, 18 AWG Center Conductor
.124 In. Fig. 1 58A/U, 58C/U Stranded, 141, Thin PVC
.124 In. Fig. 1 58/U Solid Conductor
Fig.1
Fig.2
.125 In. Fig. 2 58/U Thin-Net Plenum
310A205FV2
.125 In. Fig. 2 Mini 59, RGB Cable (23 AWG)
.125 In. Fig. 2 Mini 59, RGB Cable (26 AWG)
310A205FV3
310A204G
.150 In. Fig. 1 59, 62, 210
310A205G20
310A205G23
310A205MV
310B205MV
310A205N
.150 In. Fig. 1 RG59 20 AWG Center Cond.
.150 In. Fig. 1 Belden 8241
Fig.3
.125 In. Fig. 3
.125 In. Fig. 3
174, 178, 196, Mini RGB Cable 50
174, 178, 196, Mini RGB Cable 75
Click Here for Connector Dimensions/Stripping Dimensions
.090 In. Fig. 3 179, 187
310A205P
.125 In. Fig. 1 223
310B205Q
.205 In. Fig. 1 Belden 8281 True 75 Ohms
.150 In. Fig. 2 59, 62, Plenum
310A204T
310A208W2
.103 In. Fig.1
Mini 59, RGB Cable (26 AWG)
RoHS compliant ** crimp shank
REQUEST QUOTE
REQUEST DRAWING
BNC Twist-On and 2 Piece Crimp
BNC Twist-On connectors are field installable and require no tooling other than a stripping tool for the cable preparation. The center conductor is inserted into Bomar’s
unique Posi-Con ™contact, as the connector is twisted onto the cable’s outer jacket.
BNC 2 Piece crimp connectors make use of a fully captivated pin. Just insert the center conductor into the connector body, slide the ferrule over the braid, and apply a single
hex-crimp to the ferrule. These connectors are easy to install and reliable and are recommended only for the lower data transmission speeds.
Part
Number
Fig.
No.
Gender
RG/U Cable
310A405A
310A405F
310A405F1
310A405F2
310A405F3
310A405G
310A405T
Male
Male
Male
Male
Male
Male
Male
Fig. 8
Fig. 8
Fig. 8
Fig. 8
Fig. 8
Fig. 8
Fig. 8
6, Thick net
58A/U Solid Cond, 141, Thin PVC
58/U Solid Cond. -.172"- .178 “
58/U Thin Plenum - .158" - .162"
Thin Plenum .150"
59, 62, 210 PVC
59, 62, 210 Plenum
Fig.8
Fig.8A
Fig.6
320A405F
320A405G
Fig. 8A 58 Solid (PVC)
Female
Fig. 8A 59, 62, 210 (PVC)
Female
Male
Fig.7
s
310X205F
310X205G
Fig. 6
Fig. 6
RG58 (PVC)
Male
RG59, 62 (PVC)
s
320X205F
320X205G
Fig. 7
Fig. 7
RG58 (PVC)
Female
Female
RG59, 62 (PVC)
RoHS compliant
REQUEST QUOTE
REQUEST DRAWING
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX973-347-2111
Back to Index
2
-Page 2-
- Page 3 -
BNC Connectors
BNC Standard Clamp
BNC standard clamp style is a simplified version of the original military clamp style. It is required that the contact be soldered to the center conductor
of the cable.
Part
Number
Gender Fig. No.
RG/U Cable
310A105A
310A105D
310A105F
310A105G
310A105M
320A105F*
320A105G*
Male
9
9
6
Male
11A
Male
9
58, 58A, 58C, 141
59, 62, 210
Male
9
Male
9
174, 188, 316
58, 58A, 58C, 141
59, 62, 214
Figure 9
Female
Female
N/S
N/S
RoHS compliant
REQUEST QUOTE
REQUEST DRAWING
BNC Specialty Broadcast Plugs
Click here for complete Broadcast Catalog
Broadcast grade BNC connectors are perfectly matched to 75 ohm impedance’s. The superior plugs are for studio wiring and other broadcast uses. Solid
precision machined brass, not die-cast, hold up under the toughest conditions. Here, we are showing the eight most popular but there are many more
versions matched to the popular cable manufacturer’s part number.
Part Number
Gender Belden Cable
SBC1505A
SBC1694A
SBC1695A
SBC1855A
SBC7731A
SBC8218
Male
Male
Male
Male
Male
Male
Male
Male
1505A
1694A
1695A
1855A
7731A
8218
s
s
s
s
SBC8241
8241
SBC8281
8281
s
RoHS compliant
REQUEST QUOTE
REQUEST DRAWING
BNC Bulkhead Jacks
Versions are available for front mounting, (F/M) rear mounting, (R/M) crimp types, bulkhead mount grounded, or bulkhead mount, isolated. (Color-
coded available.) These jacks are held into the panel by a hex-nut and lock washer. All units feature nickel plated, brass bodies, and gold phosphor-
bronze contacts
Fig
No.
Part Number
Description
R/M Crimp, RG6
Hole Dwg
ID
321A245A
321A245F
321A245FV
321A245G
321A245M
321B245M*
321B245N*
326A515
13 .500
13 .500
13 .500
13 .500
13 .500
13 .500
N/S .500
14 .375
15 .375
16 .375
16 .375
16 .375
R/M Crimp, RG58 , Thin-net PVC
R/M Crimp, Thin-Net Plenum
R/M Crimp, RG59, 62, 210
s
Figure 13
Figure 14
R/M Crimp, RG174, 188, 196, 316
R/M Crimp, RG174, 188, 196, 316
R/M Crimp, RG179, 187
s
s
s
F/M Solder (Grounded)
326R515
F/M Solder (Isolated) White Bushing
F/M Solder (Isolated) Red Bushing
F/M Solder (Isolated) Green Bushing
F/M Solder (Isolated) Blue Bushing
326R515RD
326R515GN
326R515BL
Figure 15
Figure 16
RoHS compliant
REQUEST QUOTE
REQUEST DRAWING
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111
Back to Index
3
- Page 4 -
BNC Panel Jacks and Plugs
BNC panel plugs and jacks are of machined brass construction for maximum reliability and quality. All contacts are plated with a minimum of five
micro-inches of gold. The square panel types mount on .500 inch centers. The bulkhead type mounts into a .380 “D” shaped panel hole. All connector
bodies are bright-nickel plated.
Part Number
Description
Notations
Fig. No. Dwg.
316A524C
317A507
Male Bulkhead Panel Mount
Male Panel Mount
.380" Mtg. Hole
19
. 500 Mtg. Hole Centers 20
321A205F
321A205G
321A205M
327A507
Female Panel Mount, Crimp
Female Panel Mount, Crimp
Female Panel Mount, Crimp
Female Panel Mount, Solder
Fits RG58/U Cables
Fits RG59, 62 , 210
Fits RG174, 178, 196
21
21
21
---
---
---
---
Figure 19
Figure 20
.500 Mtg. Hole Centers 22
RoHS compliant
REQUEST QUOTE
REQUEST DRAWING
Figure 21
Figure 22
BNC PC Board Vertical Jacks
BNC vertical mount jacks are available in straight PC mounts and “through-panel” styles. The “through-panel”, 364 Series, is made in both isolated and
grounded versions and are ideal for applications where multiple insertions will require a connector which can endure the stress of higher torque.
Part
Number
Body Plating or
Material
Con.
Plating
Fig.
No.
Description
Insul. Mat.
"L" Dim
Dwg.
361A514*
361A505*
361A534*
Nickel / Brass
Nickel / Brass
Nickel / Brass
Teflon
Delrin
Delrin
Gold
Gold
Gold
.717
.914
.788
26
27
Straight PC Mount 50
Straight PC Mount 50
3 Post PC Mount 50
---
---
27A
Nickel/Zinc
Nickel/Zinc
Delrin
Delrin
Gold
Gold
.925
.925
27B
27B
4 Post W/ Press Fit Center Pin 50
4 Post W/ Press Fit Center Pin 75
361A505APF
361A705APF
364S595
White Valox
Black Valox
Nickel/Zinc
White Valox
Black Valox
Nickel/Zinc
Delrin
Delrin
Delrin
Delrin
Delrin
Delrin
Gold
Gold
Gold
Gold
Gold
Gold
1.36
1.36
1.36
1.36
1.36
1.3
23
24
25
23
24
25
PC Mount, Thru-Panel, 50
PC Mount, Thru-Panel, 50
PC Mount, Thru-Panel, 50
PC Mount, Thru-Panel, 75
PC Mount, Thru-Panel, 75
PC Mount, Thru-Panel, 75
Fig. 23
Fig. 24
Fig. 25
364S595B
364S595M
364S795*
s
s
s
s
364S795B*
364S795M*
RoHS compliant reflow or wave solder
RoHS compliant wave solder only
REQUEST QUOTE
REQUEST DRAWING
The press-fit center pin locks the connector into the PC
board so it is held firmly for reflow or wave soldering.
Fig. 26
Fig. 27B
* Denotes that items are not popular and may require a
special minimum quantity requirement.
Fig. 27A
________________________
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111
Back to Index
4
- Page 4 -
- Page 5 -
BNC Connectors
BNC PC Board Right Angle JacksX
These BNC jacks are manufactured to the highest standards to assure stability in maintaining impedance matching at 50 ohm and 75 ohm applications.
The 50 ohm versions have been approved by most of the U.S. manufacturers of LAN cards, and the 75 ohm is in wide use in High Definition Video
applications which require the use of a True 75 ohm connector. Contacts are phosphor bronze and will remain resilient even after hundreds of insertions.
Height Contact Fig.
F.M.S. Plating No.
Part Number
Body Material
Description
Imp.
Dwg.
364M095
Nickel/Zinc
Nickel /Zinc
White Valox
White Valox
White Valox
White Valox
Black Valox
Black Valox
Black Valox
Black Valox
White Valox
White Valox
White Valox
Black Valox
Black Valox
Black Valox
Nickel /Zinc
Nickel /Zinc
Nickel /Zinc
Nickel /Zinc
4 Post Low Profile, Metal
4 Post Low Profile, Metal
Standard Profile W/ Posts
Standard Profile W/ Posts (TPX)
Standard Profile WO Posts
Standard Profile WO Posts (TPX)
Standard Profile W/ Posts
Standard Profile W/ Posts (TPX)
Standard Profile WO Posts
Standard Profile WO Posts (TPX)
Lo Profile W/ Posts
.453
.453
.610
.610
.610
.610
.610
.610
.610
.610
.515
.515
.515
.515
.515
.515
.620
.620
.340
.340
.529
.529
.610
.610
.610
Gold 38
Gold 38
Gold 28
Gold 28
Gold 35
Gold 35
Gold 30
Gold 30
Gold 35
Gold 35
Gold 29
Gold 29
Gold 34
Gold 31
Gold 31
Gold 34
Gold 32
Gold 32
Gold 35A
Gold 35A
Gold 33
Gold 33
Gold 28
Gold 28
Gold 30
50
75
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
50
75
75
75
364M0975
364A595
364A595T
Fig 28 ig.
Fig 29
364A595NP*
364A595NPT*
364A595B
364A595BT
364A595BNP*
364A595BNPT*
364A595BL
364A595BLT
364A595BLNP*
364A595BLB
364A595BLBT
364A595BLBNP*
364M595
Fig. 30
Fig. 31
Lo Profile W/ Posts (TPX)
Lo-Profile W/O Posts
Lo-Profile W/ Posts
Lo-Profile W/ Posts (TPX)
Lo-Profile W/O Posts
Standard Profile W/ Posts
Standard Profile W/ Posts (TPX)
Super Lo-Profile W/ Clips
Super Lo-Profile W/ Clips (TPX)
Fig. 32
Fig. 33
364M595T
364M595M
364M595MT
364M595L
Nickel / Zinc Lo-Profile W/ Posts
364M595LT
364A795
Nickel / Zinc Lo-Profile W/ Posts (TPX)
White Valox
White Valox
Black Valox
Standard Profile W/ Posts (TPX)
Standard Profile W/ Posts
Standard Profile W/ Posts
Fig. 34
Fig. 35
364A795T
364A795B
364A795BT
364A795BL
364A795BLT
364A795BLB
364A795BLBT
364M795
Black Valox
White Valox
White Valox
Black Valox
Black Valox
Metal
Standard Profile W/ Posts (TPX)
Lo-Profile W/ Posts
.610
.515
.515
.515
.515
.620
.620
.529
Gold 30
Gold 29
Gold 29
Gold 31
Gold 31
Gold 32
Gold 32
Gold 33
75
75
75
75
75
75
75
75
Lo-Profile W/ Posts (TPX)
Lo-Profile W/ Posts
Lo-Profile W/ Posts (TPX)
Standard Profile W/ Posts
Standard Profile W/ Posts (TPX)
Lo-Profile W/ Posts
Fig. 36 (top) Fig. 37
364M795T
Metal
364M795L
Metal
364M795LT
364F595BL
364F595BLB
364H595BL
364H595BLB
364NT
Metal
Lo-Profile W/ Posts (TPX)
9400pF 500V Decoupled
9400 pF 500V Decoupled
9400 pF 1500V Decoupled
9400 pF 1500V Decoupled
Jam Nut ( 364 Series)
.529
.515
.515
.515
.515
Gold 33
Gold 36
Gold 37
Gold 36
Gold 37
---- 36N
75
50
50
50
50
White Valox
Black Valox
White Valox
Black Valox
Zinc/Brass
---
---
---
---
N/A ----
N/A ----
N/A ----
364LW
Zinc/ Steel
Lock Washer ( 364Series)
Knurled Nut (364 Series)
---- 37N
---- 38N
RoHS compliant reflow or wave solder
RoHS compliant wave solder
364 KNT
Brass/Nickel
only
REQUEST QUOTE REQUEST DRAWING
(TPX) insulator for re-flow solder
Board Clips Are Available In Place
of Posts. Add Suffix “C”
Spear-point clips lock snuggly into
the board.
Hardware
Fig. 36N
Fig. 37N
Note:
Mounting
hardware
is optional
and must
be ordered
separately.
Hardware
is not sold
without the
connectors.
Fig. 38N
* Denotes that items are not popular and may require a special minimum order quantity.
REQUEST QUOTE
REQUEST DRAWING
_____________________________
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111
Back to Index
5
- Page 5 -
- Page 6 -
BNC V-Bite ® PC Edge Mount
The V-Bite ® is an industry award winning design PCB connector with all the advantages a designer could want. It edge mounts to the board which
offers the lowest profile and utilizes very little PCB real estate. It lends itself to surface mount and through-hole soldering techniques. There are versions
for IR and convection reflow soldering. Because the connector locks into place both above and below the PCB it disperses rotational torque relief to the
board and not the solder points. The V-Bite ® design offers the lowest VSWR ratings due to the straight through-put contact design. No right angles for
reflection. Available in 50 and 75 ohm, threaded and non-threaded. Other options for PCB thickness available. Other interfaces
available.
( See “F”, BNC Twin and TNC sections.)
Fig.
No.
Part Number
Description
Imp
Contact
Dwg.
361V504ER
361V504ET
BNC Jack W/ Teflon For Reflow Solder
Brass./Gold 39A
Brass./Gold 39
Brass./Gold 39B
50
50
BNC Threaded Jack W/ Teflon For Reflow
Solder
361V504EFT
361V509E
BNC Threaded Jack W/ Teflon Insulator/Flange
BNC Jack W/ Polyethylene Insulator
50
50
50
75
Brass/Tin
Brass/Tin
39A
39
361V509ET
361V704ER
BNC Threaded Jack W/ Polyethylene Insulator
BNC Jack W/ Teflon For Reflow Solder
---
Brass./Gold 39A
BNC Threaded Jack W/ Teflon For Reflow
Solder
361V704ET
Brass./Gold 39
75
75
BNC Threaded Jack W/ Teflon Insulator/Flange
Brass./Gold 39B
361V704EFT
361V709E
BNC Jack W/ Polyethylene Insulator
BNC Threaded Jack W/ Polyethylene Insulator
Knurled Nut (361 Series)
Brass/Gold 39A
Brass./Gold 39
75
75
NA
---
---
361V709ET
361KNT
---
---
3M61V704
Mini- BNC Jack W/ Teflon for Reflow Solder
Brass./Gold 39C
75
RoHS compliant reflow or wave solder
RoHS compliant wave solder only
REQUEST QUOTE
REQUEST DRAWING
Low Profile .270 High FMS
Anti Rotational
VSWR 1.15:1
Patented V-Bite® Snaps Into PCB
Surface Mount Center Contact
Pick & Place Version Available
Fig. 39
Fig.39B
Fig. 39C
Fig.39A
s
s
BNC Reduced Size PCB Right Angle Mount
The Super Low™ Profile BNC PC jack reduces the amount of board space needed to mount a PC jack. Board clips hold the unit in place for soldering. The smallest, lowest
profile right angle BNC jack available.
The Lo-Deco™ features a four post design that offers greater stability after wave soldering. Also featured is a gold plated contact and nickel plated cast zinc body. Smooth, sleek
and aesthetically pleasing design is tumbled to remove casting lines.
Dwg.
Part Number
Description
Imp. Contact Fig. No.
364M595M
364M595MT
364M795M
364M795MT
BNC Super Low Profile Jack
BNC Super Low Profile Jack
BNC Super Low Profile Jack
BNC Super Low Profile Jack
Phos./Gold 35A
Phos./Gold 35A
Phos./Gold 35A
Phos./Gold 35A
50
50
75
75
364M095
BNC Lo-Deco Jack
BNC Lo-Deco Jack
Phos./Gold 38
Phos./Gold 38
50
75
364M0975
RoHS compliant reflow or wave solder
QUOTE
RoHS compliant wave solder only
REQUEST DRAWING
REQUEST
.
Fig 35A
PC Layout for Super Low Profile
Fig. 38
*Denotes that items are not popular and may require a special minimum order quantity.
________________________
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111
Back to Index
6
- Page 6 -
- Page 7 -
BNC Connectors
BNC Dual PC Jacks (Threaded)
Right Angle or Vertical Stacked: When board space becomes a serious issue and you still need the robust, full size, BNC connectors, a dual stacked right angle or vertical
version will do the trick. Assembly insertion time is cut in half as well. The Dual 364 series is available in both Valox isolated and all metal construction.
(shown with closed back option FS)
Right Angle
Part Number
Description
Imp. Contact Fig.No. Dwg.
364A2595
364A2595T
364A2795
364A2795T
364A2595B
364A2795B
364M2595
364M2595T
364M2795
364M2795T
3M64M2795
364KNT
Dual Right Angle, White Valox
Dual Right Angle, White Valox (TPX)
Dual Right Angle, White Valox
Dual Right Angle, White Valox (TPX)
Dual Right Angle, Black Valox
Dual Right Angle, Black Valox
Dual Right Angle, Metal
Phos./Gold 38A
Phos./Gold 38A
Phos./Gold 38A
Phos./Gold 38A
Phos./Gold 38A
Phos./Gold 38A
Phos./Gold 38B
Phos./Gold 38B
Phos./Gold 38B
Phos./Gold 38B
Phos-Gold 38C
75
Fig. 38A
Fig. 38B
Dual Right Angle, Metal (TPX)
Dual Right Angle, Metal
Dual Right Angle, Metal (TPX)
Dual Right Angle, Metal Mini-BNC
Knurled Nut for Dual BNC
N/A Brass/Nickel 38D
Vertical
Fig. 40D
Fig. 38C
Part Number
Description
Imp. Contact Fig.No.
364S2595
Dual Vertical, White Valox
Dual Vertical, White Valox
Dual Vertical, Black Valox
Dual Vertical, Black Valox
Dual Vertical, Metal
Dual Vertical, Metal
Tool
Phos./Gold 40D
Phos./Gold 40D
Phos./Gold 40D
Phos./Gold 40D
Phos./Gold ----
Phos./Gold ----
364S2795
364S2595B
364S2795B
364S2595M
364S2795M
Fig. 38D
Fig. 38E
Part Number
Description
Imp. Contact Fig.No.
BD36400
-
Hex Shafted Tool for Knurled Nut
N/A Steel/Nickel 38E
RoHS compliant reflow or wave solder
QUOTE
RoHS compliant wave solder only
REQUEST DRAWING
REQUEST
Note:Hardware is optional and must be ordered separately
BNC Multi-Port PC Jacks (Non-Threaded)
Side By Side: These right angle units are available in dual or quad configurations. These units are not threaded for panel installation using a jam nut. Up one fourth the installation
time.
Part
Number
Fig.
No.
Description
Imp.
Contact
Phos./Gold
Phos./Gold
Phos./Gold
Phos./Gold
Phos./Gold
Phos./Gold.
Phos./Gold
Phos./Gold
Dual Right Angle, Side By Side White
Valox
365A2595
365A2795
38B
38B
38B
38B
NS
Dual Right Angle, Side By Side White
Valox
Dual Right Angle, Side By Side Black
Valox
365A2595B
Dual Right Angle, Side By Side Black
Valox
365A2795B
365A4595
Quad Right Angle, Side By Side White
Valox
Quad Right Angle, Side By Side White
Valox
365A4795
NS
Quad Right Angle, Side By Side Black Valox
Quad Right Angle, Side By Side Black Valox
NS
365A4595B
365A4795B
NS
RoHS compliant reflow or wave solder
RoHS compliant wave solder only
QUOTE REQUEST DRAWING
REQUEST
Fig.38B
________________________
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111
Back to Index
7
- Page 7 -
- Page 8 -
- Page 9 -
BNC Adapters
These sturdy within-series BNC adapters are available in all standard designs. Additionally, several unique constructions compliment the product group and allow adaptations for every
conceivable application. All connector bodies are plated with bright nickel. Male contacts are brass, female contacts are phosphor bronze. All contacts are plated with 5 micro inches of
gold.
Part
Number
330A505
Fig.
No.
35
36
37
37
41
41
38
39
40
42
45
45
43
44
49
49
48
47
47
46
Description
Male/ Male Inline Barrel Splice
332A505
Female/Female Inline Splice
335A544
Female/Female Inline Bulkhead Mount (Grounded)
Female/Female Inline Isolated Bulkhead (Metal Outer Thread)
Crimp “T” Adapter for RG58 Cable
335R544
343A205F
343A205G
343A505
Crimp “T” Adapter for RG59, 62 Cables
Female/Male/Female “T” Adapter (Yes, it runs with Netware™ )
Female/Female/Female “T” Adapter
Fig. 39
Fig. 38
345A505
351A505
Female/Male Right Angle Adapter
383U505
The Goalie™
383U205F
383U205G
383K505*
383P505*
353U205F*
353U205G*
353U505*
393U205F*
393U205G*
393U505*
RoHS compliant
The Goalie Brute™ Crimp Version for RG58 Cable
The Goalie Brute™ Crimp Version for RG59, 62 Cables
The Goalie Brute™
The Insulated Goalie
Male/Female/Female Right Angle Double-Down™Crimp for RG58
Male/Female/Female Right Angle Double-Down™ Type for RG59
Male/Female/Female Right Angle Double-Down™
Male/Female/Female Straight Double-Down™Crimp for RG58
Male/Female/Female Straight Double-Down™Crimp for RG59
Male/Female/Female Straight Double-Down™
Fig. 40
Fig. 42
REQUEST QUOTE
REQUEST DRAWING
Fig.44
Fig. 43
Fig. 35
Fig. 36
Fig. 37
Fig. 48
Fig. 46
Fig. 41
Fig. 49
Fig. 45
Fig. 47
Specialty LAN Adapters
Double Down™ adapters are designed to allow parallel cables entering a patch panel, or a BNC LAN terminal port to be guided at a right angle to the input jack. Two versions
accomplish this: one is a right angle with side-by-side jacks for areas with little rear clearance, and the other is a straight version for installations where width between panel jacks in
limited. Crimp types are for permanent installations. Goalie, and Goalie Brute allow parallel cable 90° entry which require a minimum of rotational cable space.
*Minimum quantity Requirements May Apply - Contact Sales
________________________
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111
Back to Index
9
- Page 9 -
- Page 10 -
BNC Connectors
BNC Terminators
BNC terminators are available in standard 1% tolerance versions and in the economy 5% tolerance styles. The standard types have removable color coded caps for easy identification.
The economy type are color coded as well but caps are not removable.
Fig.
No.
Part Number
Description
310X054A
310C054
310X074
HBC310X075
310X094
HBC310X075
EJ175
50
50 with Red Cap
51
50 with Grounding Chain
75 with Blue Cap
50
Fig. 50
Fig. 51
52
75 Precision .1% Tolerance
93 with Yellow Cap
75 Precision .1% Tolerance
50 Economy
50
53
N/S
N/S
N/S
EJ177
75 Economy
EJ179
93 Economy
RoHS compliant
REQUEST QUOTE
REQUEST DRAWING
Fig. 52
s
s
s
ss
FOR TECHNICAL SUPPORT: PHONE 973-347-4040 / FAX 973-347-2111
Back to Index
10
- Page 10 -
Coax Crimp Tools
Professional grade hex-crimp tools for coaxial connectors are available in ratchet and non-ratcheting types, both provide dependable service. Ratchet tools feature replaceable dies.
Included is a convenient release mechanism to unlatch the ratchet in the event of an improper crimp. Each too also crimps the contact pin to the conductor.
Part Number
Description
BD10100
BDHD100
BDHD200
BDHD100
BD11012
BDHD100
Hex Crimp Ratchet for "F" Types, RG59, RG6
Hex Crimp Ratchet for Belden 8281
Hex Crimp Ratchet for BNC/TNC RG58,59,62 and MV
Hex Crimp Ratchet for Mini-RG59
Hex Crimp Ratchet for "N" Crimp RG11, RG213, RG214
Hex Crimp Ratchet for BNC/TNC RG6, RG59
REQUEST QUOTE
- Page 11 -
s
相关型号：
©2020 ICPDF网 联系我们和版权申明