1526460000 [WEIDMULLER]
Component Carriers and Housings; 分量载波和外壳型号: | 1526460000 |
厂家: | WEIDMULLER |
描述: | Component Carriers and Housings |
文件: | 总20页 (文件大小:733K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Component Carriers and Housings
292
Component Carriers and Housings
Weidmüller DK 4 and DKT 4 terminals Weidmüller EG 4 housing
Weidmüller housings type WAVEBOX
are suitable for the installation of electronic as type EG 3, offers the same width of
It is essential to provide fit-for-use housings
components with a maximum diameter or
22.5 mm. However, the greater installation for modern electronic components. Setting
width of 4.5 mm. Four independent clamp- depth (75 mm) and height (109 mm) allow and control functions must be easily car-
ing yoke screw connections are available.
A snap-on frame expands the installation
space in the DK4 by 6 mm respectively.
Depending on type, these modular termi-
nals are suitable for mounting on TS 32,
TS 35 x 7.5 or TS 35 x 15 mounting rails
according to European standards EN 50
035 and EN 50 022.
the installation of more complex circuit
configurations. The built-in installation can respect to heat dissipation and EMV prop-
be connected via 6 screw connections.
The snap-on combination foot allows the
terminal to be mounted on TS 32, TS 35 x costs in the switchgear cabinet.
7.5 or TS 35 x 15 mounting rails. Due to In addition, ergonomics and design are
the sliding foot construction, the EG 4 can becoming increasingly important for high-
be slid forwards or backwards on the
locking foot, and can be turned through
180° (e.g. exchanging of input and out-
put).
ried out and technical requirements with
erties should be supported.
An ideal design saves space and wiring
quality electronic products.
These are the criteria that led to the devel-
opment of WAVEBOX. Simplified produc-
tion methods (shaft soldering, SMD) ensure
cost-savings for the customer.
The WAVEBOX is characterised by:
• Optimum width for any application
(12.5 mm, 17.5 mm, 22.5 mm)
• Large component assembly surface;
SMDs can be mounted on the solder
side
• UL94 flammability class V2
• No tools required for assembly
• Plug-in printed circuit board
• Plug-in cross-connection via ZQV 2.5 N
• Hinged, transparent cover
• BLZ 5.08 screw/plug and socket con-
nector
• BLFZ 5.08 optional tension clamp/plug
and socket connector
• Marking option with WS tags
• Mounts onto TS 35
Weidmüller individual parts for RS 70
locking socket
Weidmüller WDK 2.5 terminals
are suitable for the installation of electrical
components with a maximum width of 4
mm. As many as four independent clamp-
ing yoke screw connections or 4 6.3 x 0.8 correspond to type EG 4. The EG 5 has
tab connections are available. These termi- 12 screw connections, which can be wired
nals are suitable for mounting on TS 35 x
7.5 or TS 35 x 15 mounting rails.
Weidmüller EG 5 housings
with solder lugs inside the housing. The
snap-on combination foot allows the ter-
minal to be mounted on TS 32, TS 35 x
7.5 or TS 35 x 15 mounting rails. Due to
the sliding foot construction, the EG 4 can
be slid 6 mm forwards or backwards on
the engaging foot and can be turned
through 180° (e.g. exchanging input and
output).
Weidmüller EG 1 housings
offer 4 screw connections and, as acces-
sories, up to 4 0.8 x 4.8 mm solder/tab
connections on a width of 18 mm. The
screw clamp busbar ends with a solder
ring inside the housing. Two end plates
seal the module. Depending on type, the
modules are mounted on TS 32, TS 35 x
7.5 or TS 35 x 15 mounting rails.
Weidmüller EG 6 housings
have a bus-suitable contact carrier. The
bus connection is created by directly
mounting several housings in a row. 32
connections are available on both sides of
the housing as crimp connector block
contacts. The housing accepts printed cir-
cuit boards with dimensions of 100x120
mm. The printed circuit board is adapted
with a VG 64 DIN strip. The front panel is
screwed onto the circuit board similar to
the 19" technology. The locking foot
allows easy mounting onto the TS 35
mounting rail.
Weidmüller EG 2 housings
latch together to form units from 20 mm in
width. Any desired intermediate parts or
feet can be connected between two side
pieces (locking feet) at intervals of 5 mm. In
this way, a carrier module is constructed
for PCB, on which various components
can be soldered. The assembly snaps onto
TS 32, TS 35 x 7.5 or TS 35 x 15 mount-
ing rails.
The external shape of these housings cor-
responds to Type EG 1. Four screw con-
nections or up to 8 0.8 x 6.6 mm/0.8 x
2.8 mm tab connectors are connected
with a printed circuit board in the housing.
They can be mounted on TS 32, TS 35 x
7.5 or TS 35 x 15 mounting rails.
Weidmüller EG 3 housings
The Weidmüller RSX custom circuit
module
provides 6 screw connections or 12
0.8 x 6.3 mm/0.8 x 2.8 mm tab connec-
tions on a width of 22.5 mm. As an acces-
sory, Weidmüller offers a shaped printed
circuit board with a 2.54 mm hole grid
or fully copper-coated. The engagable
combination foot allows the terminal to
be mounted on TS 32, TS 35 x 7.5
or TS 35 x 15 mounting rails.
The MPL mounting plate is used to mount
the housing directly (without mounting rail).
Due to the sliding foot construction, the
EG 3 can be turned through 180° in all
types of assembly (e.g. exchanging input
and output).
Weidmüller SEG/U housing
is a largely prefabricated unit wich accepts
up to 5 components such as resistors,
diodes, varistors or capacitors via soldering
terminals. The components are connected
via screw clamps or tab connections. This
module is also suitable for mounting on TS
32, TS 35 x 7.5 or TS 35 x 15 mounting
rails.
enable the plug-in module assembly of a
70 x 52 x 1 mm printed circuit board. The
circuit board is attached to the accessory
cover plate via snap-in hooks. The housing
contains a 13-pole socket block for instal-
lation of the module; 6 screw connections
are available for connection. The permissi-
ble power loss in the housing during con-
tinuous operation of terminals in rows
amounts to 1.5W, depending on the sur-
face temperature of the soldered compo-
nents. The snap-on combination foot
allows the housings to be mounted on TS
32, TS 35 x 7.5 or TS 35 x 15 mounting
rails.
Weidmüller locking socket profiles
The RS 45, RS 80 and RS 100 profiles are
available as 2 m long strips. The extruded
profiles can be easily cut to any length with
a saw. In this way, a carrier module is con-
structed for a printed circuit board on
which various components can be solder-
ed. Locking feet can be slid into these pro-
files for mounting on TS 32, TS
35 x 7.5 or TS 35 x 15 mounting rails. The
sliding foot construction of the RS 80 also
allows the fixing foot be turned through 180°.
293
Housings
Terminals
DK 4
DKT 4
Dimensions
Terminal width
6 mm
9 mm
6 mm
9 mm
(+fitting tolerance 0.2)
Insulating stripping length
Connection data
Screw connection, solid
Screw connection, stranded
Conductor cross-section
Tightening torque range
Torque phase with
0.5…4 mm2
0.5…4 mm2
AWG 22…12
0.5-1.0 Nm
1
0.5…4 mm2
0.5…4 mm2
AWG 22…17
0.5 - 1.0 Nm
1
DMS 2 electric screwdriver
Rated data acc. to VDE
Rated cross-section
Rated voltage
4 mm2
380 V~
10 A
4 mm2
380 V~
10 A
Rated current
Power loss
0.5 W
0.5 W
Connection diagram
Ordering data
Terminal
for TS 32 Y
Type
DK 4 PA
DK 4 PA
DKT 4 PA
DKT 4 PA
Cat. No.
Type
1537960000
DK 4/35 PA
8203490000
1115460000
DK 4/35 PA
1115560000
1686940000
DKT 4 /35PA
0687460000
1115660000
DKT 4/35 PA
1115760000
for TS 35 W
Cat. No.
Matching contour frame
for TS 32 Y
for TS 35 W
Accessories
Type
DK 4 RA
0690960000
DK 4 RA/35
0691060000
Type
DK 4 RA
Cat. No.
Type
0690960000
DK 4 RA/35
0691060000
Cat. No.
Cat. No.
Qty.
Type
Cat. No.
Qty.
2 m
2 m
2 m
50
Mounting rail (2 m lenghts)
TS 32
0122800000
0383400000
0498000000
0206160000
0383560000
0359260000
0363360000
0215700000
0180400000
0336400000
0336500000
0336600000
0368600000
0446700000
0446600000
0266800000
0303400000
0303300000
0482700000
0482800000
0482900000
0526400000
0526700000
2 m TS 32
0122800000
0383400000
0498000000
0206160000
0383560000
0687560000
0363360000
TS 35 x 7.5
TS 35 x 15
EWK 1 (8.5)
EW 35 (8.5)
AP PA (1.5)
TSch 4
2 m TS 35 x 7.5
2 m TS 35 x 15
End bracket
for TS 32
for TS 35
50 EWK 1 (8.5)
(thickness mm)
50 EW 35 (8.5)
50
End plate (thickness mm)
Partition
20 AP PA (1.5)
20
100 TSch 4
100
Socket for test plug
Test plug (pin diameter)
StB 8.5
50
PS (ø 2.3)
Q 2
20
Cross-connection
(preassembled)
2-pole
50
3-pole
4-pole
Q 3
50
Q 4
50
10-pole
Q 10
20
Switchable cross-connection bracket
Connection sleeve
VL 2
–
VH 10
100
Fixing screw
BS M 2.5 x 14
AD 4
100
Cover plate (4 terminals)
Fixing screw (plastic)
50
BSK M 2.5 x 18
QB 2*
100
Cross connection bridge
100 QB 2*
50 QB 3*
50 QB 4*
10 QB 75 blank*
0482700000
0482800000
0482900000
0526400000
0526700000
100
50
50
10
–
QB 3*
QB 4*
QB 75 blank*
Insulation profile
–
Insulation profile
* Accessories see terminals catalogue
294
Housings
Terminals
WDK 2.5
WDK 2.5 F
WDK 2.5 FF
Dimensions
Terminal width
5 mm
5 mm
5 mm
5 mm
–
(+fitting tolerance 0.2)
Insulating stripping length
10 mm
10 mm
10 mm
Connection data
Screw connection, solid
Screw connection, stranded
Conductor cross-section
Tightening torque range
Torque phase with
0.5…4 mm2
0.5…2.5 mm2 0.5…2.5 mm2 0.5…2.5 mm2
0.5…4 mm2
0.5…4 mm2
AWG 26…4
0.4 - 0.7 Nm
1
AWG 26…4
AWG 26…4
0.4 - 0.7 Nm
1
DMS 2 electric screwdriver
Rated data acc. to VDE
Rated cross-section
Rated voltage
2.5 mm2
380 V~
26 A
2.5 mm2
380 V~
1 mm2
380 V~
Rated current
12 A (2 x 6 A)
0.5 W
12 A (2 x 6 A)
0.5 W
Power loss
0.5 W
Connection diagram
Ordering data
Terminal
for TS 32 Y
Type
Cat. No.
Type
for TS 35 W
WDK 2.5
WDK 2.5
WDK 2.5 F
WDK 2.5 FF
Cat. No.
1023200000
1023100000
1021600000
1021700000
Matching contour frame
for TS 32 Y
for TS 35 W
Accessories
Type
Cat. No.
Type
WZR WDK 2.5
WZR WDK 2.5
WZR WDK 2.5
Cat. No.
1074000000
1074000000
1074000000
Type
Cat. No.
Qty.
Type
Cat. No.
Qty.
Type
Cat. No.
Qty.
Mounting rail (2 m lenghts)
TS 35 x 7.5 0383400000 2m TS 35 x 7.5 0383400000 2m TS 35 x 7.5 0383400000 2m
slotted 0514500000 2m slotted 0514500000 2m slotted 0514500000 2m
TS 35 x 15 0498000000 2m TS 35 x 15 0498000000 2m TS 35 x 15 0498000000 2m
End bracket
(thickness mm)
for TS 35
EW 35 (8.5) 0383560000 50 EW 35 (8.5) 0383560000 50 EW 35 (8.5) 0383560000 50
End plate (thickness mm)
WAP
1059100000100 WAP
1059100000100 WAP
1059100000100
Cross-connection
(preassembled)
2-pole
WQV 2.5
WQV 2.5
WQV 2.5
WQV 2.5
1053660000 50 WQV 2.5
1053760000 50 WQV 2.5
1053860000 50 WQV 2.5
1054460000 50 WQV 2.5
1053660000 50 WQV 2.5
1053760000 50 WQV 2.5
1053860000 50 WQV 2.5
1054460000 50 WQV 2.5
1053660000 50
1053760000 50
1053860000 50
1054460000 50
3-pole
4-pole
10-pole
295
Housings
Housings
EG 1
EG 2
Rated data
Reference voltage acc. to VDE 0110 1/89
Pollution severity
300 V
2
300 V
2
Overvoltage category
II
II
Current
10 A
1 W
IP 20
V-2
10 A
1 W
IP 20
V -2
100 °C
Power loss (when mounted in row)
Protection class
Flammability acc. to UL level
Upper temperature limit
Connection data
100 °C
Screw connection solid
Screw connection stranded
Tightening torque range
Torque phase with DMS 2 electric srewdriver
0.5...4 mm2
0.5...2.5 mm2
0.5 - 1.0 Nm
2
0.5...4 mm2
0.5...2.5 mm2
0.5 - 1.0 Nm
2
Ordering data
Type
Cat. No.
Qty.
Type
Cat. No.
Qty.
20
Housing frame
EG 32/1 for TS 32
EG 35/1 for TS 35
AP PA
0453560000
0453860000
0453660000
20 EG 2 R
20
0508860000
End plate
20 AP PA
0453660000
20
Combi foot, latchable
Assembly plate
Clamping yoke unit, right
Clamping yoke unit, left
Intermediate plate
ZB-R
ZB-L
0495960000
0495860000
0453760000
0510260000
20
20
20
50
ZP
VZ
0453760000
0510260000
20 ZP
50 VZ
Connection spigot
Connection tab 0.8 x 6.3 mm
Connection tab 2 x 0.8 x 2.8 mm
Tab / solder lug 0.8 x 2.8 mm
Tab / solder lug 0.8 x 4.8 mm
Printed circuit board, copper-coated
Printed circuit board 5.08 pitch
S 2.8
S 4.8
0475800000
0475700000
20 S 6.3
0496100000
0163500000
100
50
20 S 2 x 2.8
Dimensions
see page
306, Fig. I
306, Fig. II
296
Housings
EG 3
EG 4
EG 5
300 V
2
300 V
2
300
2
V
II
III
III
10 A
1.5 W
IP 20
V - 2
100 °C
10 A
1.6 W
IP 20
V - 2
100 °C
1 A
1.6 W
IP 20
V - 2
100 °C
0.5...4 mm2
0.5...2.5 mm2
0.4 - 0.8 Nm
1
0.5...4 mm2
0.5...2.5 mm2
0.4 - 0.8 Nm
1
0.5...4 mm2
0.5...2.5 mm2
0.5 - 0.8 Nm
1
Type
Cat. No.
Qty.
Type
Cat. No.
Qty.
–
Type
Cat. No.
Qty.
–
EG 3 R
0163960000
15 EG 4 R
1116560000
EG 5 R
1116860000
AP PA
RKF
MPL
ZBE
ZBE
VZ
0133760000
0163860000
0158560000
0138360000
0138360000
0510260000
20 AP PA
20 RKF
50 MPL
50 ZBE
50 ZBE
50 VZ
ZP
1116060000
1116260000
1116360000
0138360000
0138360000
0510260000
0453760000
20
20
50
50
50
50
–
AP PA
RKF
MPL
ZBE
ZBE
VZ
1116160000
1116260000
1116360000
0138360000
0138360000
0510260000
0453760000
20
20
50
50
50
50
–
ZP
S 6.3
0496100000
0163500000
100
S 2 x 2.8
50
LP-CU
LP-LR
0167300000
0167400000
–
–
307, Fig. V
307, Fig. VI
307, Fig. VII
297
Housings
Housings for pluggable
printed circuit boards
WAVEBOX S 22.5
WAVEBOX L 22.5
Housing version
Polyamide PA 6.6
U2 (UL 94)
Flammability class
Colour
grey
Notes:
BLZ may only be actuated with the supply disconnected. If
small power ratings need to be switched for operating reasons,
empirical values are available on request.
Description
Type
Cat. No.
Qty.
Type
Cat. No.
Qty.
10
Housing base completely assembled with locking foot, not
WAVEBOX S 22.5
8426440000
10 WAVEBOX L 22.5
8426470000
cross-connectable
Housing base completely assembled with locking foot, cross-
WAVEBOX S 22.5 QV
Head
8426450000
8426460000
8426620000
8426630000
10 WAVEBOX L 22.5 QV
8426480000
8426490000
8426620000
8426630000
10
10
10
10
connectable
10
10
10
Top part with transparent cover/top unit
Pin header
Pin header 5.08/3-pole orange; right
Pin header
Pin header 5.08/3-pole orange; left
Connector socket 2-pole for BLZ 5.08/2 screw terminal
- orange
- black
Other colours are available on request
Connector socket 3-pole for BLZ 5.08/3 terminal
Connector socket
Connector socket
1526560000
1526510000
100
1526560000
1526510000
100
100
- orange
100
- black
Other colours are available on request
Connector socket 2-pole for BLZ 5.08/3 tension clamp terminal
- orange
- black
Connector socket 3-pole for BLZ 5.08/3 tension clamp terminal
Connector socket
Connector socket
1707470000
1707700000
100
100
1707470000
1707700000
100
100
- orange
- black
Accessories
ZQV 2.5N/2 black
ZQV 2.5N/2 red
ZQV 2.5N/2 blue
ZQV 2.5N/2 yellow
Coding element
Coding element
1718080000
1717900000
1717990000
1693800000
1545710000
1573010000
60
60
1718080000
1717900000
1717990000
1693800000
1545710000
1573010000
60
60
Cross-connection ZQV 2.5N/2 black
Cross-connection ZQV 2.5N/2 red
Cross-connection ZQV 2.5N/2 blue
Cross-connection ZQV 2.5N/2 yellow
Coding elements for BLZ BLZ KO black
Coding elements for BLZ BLZ KO orange
60
60
60
60
100
100
100
100
WS connector marker
WS15/5 Multicard*
WS10/5 Multicard *
WS10/5 Neutral*
-
-
-
-
-
-
-
-
CAP
8428120000
-
Screw cap
2.2 W/40 °C
3 W/20 °C
2.2 W/40 °C
Power loss, arranged side by side, type
Ordering example WAVEBOX S 22.5
Housing base completely assembled with locking foot, not
cross-connectable
Type
Cat. No.
8426440000
8426460000
8426620000
8426630000
1526560000
1x
1x
1x
1x
2x
Top part with transparent cover/top unit
Pin header 5,08/3-pole orange; right
Pin header 5.08/3-pole orange; left
Connector socket 3-pole for BLZ 5.08/3 screw terminal, orange
* Marker see page 317 + 318
Attention!
These WAVEBOX-housings are authorized only to be used
in a closed control cubicle!
Dimension drawing, see page 308
298
Housings
Housings for pluggable
printed circuit boards
WAVEBOX 12.5 mm
WAVEBOX 17.5 mm
Housing version
Polyamide PA 6.6
U2 (UL 94)
Flammability class
Colour
grey
Hinweise:
BLZ may only be actuated with the supply disconnected. If
small power ratings need to be switched for operating reasons,
empirical values are available on request.
Description
Type
Cat. No.
Qty.
12
Type
Cat. No.
Qty.
8
Housing base completely assembled with locking foot, not
WAVEBOX 12.5 mm
WAVEBOX 12.5 mm
8426530000
WAVEBOX 17.5 mm
WAVEBOX 17.5 mm
8426560000
cross-connectable
Housing base completely assembled with locking foot, cross-
8426540000
8426550000
8427390000
8427400000
12
12
8426570000
8426580000
8449220000
8449230000
8
8
connectable
Top part with transparent cover/top unit
orange
orange
100
100
beige
beige
100
100
Pin header 5.08/2/3-pole; right
Pin header 5.08/2/3-pole; left
Connector socket 2-pole for BLZ 5.08/2 screw terminal
1526460000
1526410000
100
100
- orange
- black
Other colours are available on request
Connector socket 3-pole for BLZ 5.08/3 screw terminal
1526560000
1526510000
100
- orange
- black
Other colours are available on request
Connector socket 2-pole for BLZ 5.08/3 tension clamp terminal
1707460000
1707690000
100
100
- orange
- black
Connector socket 3-pole for BLZ 5.08/3 tension clamp terminal
1707470000
1707700000
100
100
- orange
- black
Accessories
1718080000
1717900000
1717990000
1693800000
1678530000
60
60
60
60
1
1718080000
1717900000
1717990000
1693800000
1678530000
60
60
60
60
1
Cross-connection ZQV 2.5N/2 black
Cross-connection ZQV 2.5N/2 red
Cross-connection ZQV 2.5N/2 blue
Cross-connection ZQV 2.5N/2 yellow
Coding elements for BLZ BLZ KO black
Coding elements for BLZ BLZ KO orange
WS connector marker
1609890000
1635010000
1060860000
96
144
200
1609890000
96
-
WS15/5 Multicard*
WS10/5 Multicard *
WS10/5 Neutral*
-
-
-
CAP
8428130000
100
CAP
8428120000
100
Screw cap
3 W/20 °C
2 W/40 °C
3 W/20 °C
2 W/40 °C
Power loss, arranged side by side, type
* Marker see page 317 + 318
Attention!
These WAVEBOX-housings are authorized only to be used
in a closed control cubicle!
Dimension drawing, see page 308
299
Housings
Housings
SEG-U/LPU
EG 6
Rated data
Reference voltage acc. to VDE 0110 1/89
Pollution severity
50 V
2
32 V nach VDE 0110/1.89
2
Overvoltage category
III
III
Current
1 A
0
Current-carrying capacity of bus contacts
Volume resistance of bus contacts
Printed circuit board dimensions
Power loss (when mounted in row)
Protection class
1 A/δ 50 C
U
12 mΩ
100 x 120 x 1.8 mm
1.5 W
IP 20
V -2
IP 00
V - 2
Flammability acc. to UL level
Upper temperature limit
100 °C
100 °C
Connection data
Screw connection solid
0.5...4 mm2
0.5...2.5 mm2
0.5 Nm
Screw connection stranded
Tightening torque range
Torque phase with electric screwdriver DMS 2
1
Ordering data
Type
Cat. No.
Qty.
Type
Cat. No.
Housing frame
Housing SEG/U
Cover plate
8007870000
8066100000
–
–
EG 6 (incl. front plate)
8095840000
End plate
Combi foot, latchable
Assembly plate
Clamping yoke unit, right
Clamping yoke unit, left
Intermediate plate
Connection spigot
Connection tab 0.8 x 6.3 mm
Connection tab 2 x 0.8 x 2.8 mm
Tab / solder lug 0.8 x 2.8 mm
Tab / solder lug 0.8 x 4.8 mm
Printed circuit board, copper-coated
Printed circuit board 2.54 pitch
Dimensions
See page
307
307
300
Housings
Locking socket
RSX
Custom-circuit module
SKH-RS
Card-holder for rail-mounted profiles
Individual parts RS 70
Dimensions
Fixing foot
Total width:
Length:
77 mm
Spacer
25 mm
66 mm
55 mm
Printed circuit board
Inside height:
Inside width:
For soldering 5 components
Height of solder lugs: 6 mm
Solder lug spacing: approx. 20 mm
Max. voltage: 250 V~
Can be engaged together with RS 70 individual parts
For vertical insertion of a printed circuit board
Width:
60 mm
Thickness:
1.8 (+0.15) mm (DIN 40802 T. 2)
Max. current: 5 A
Ordering data
Screw connection version
Tab connection version
Card holder
Type
RSX
RSX-F
Cat. No.
Type
Cat. No.
Qty.
0329761001
0329860000
Strip profile
SKH-RS
4163020000
1
Fixing foot right, with marking facility
Fixing foot right, without marking facility
Fixing foot left, without marking facility
Fixing foot middle (intermediate foot)
Fixing foot (RS 80/RS 100) for TS 32/TS 35
Spacer 5 mm
RFB
RFO
RF
0119560000
0126260000
0119660000
0213760000
20
20
20
20
RFM
ZW 5
0119760000
0119860000
0126160000
0119960000
0120060000
20
20
20
20
20
Spacer 15 mm
ZW 15
ZW 25
ZW 30
ZW 45
Spacer 25 mm
Spacer 30 mm
Spacer 45 mm
End plate for mounting on rail without cover
End plate for direct mounting without cover
End plate for mounting on rail with low cover
End plate for direct mounting with low cover
End plate for mounting on rail with high cover
End plate for direct mounting with high cover
Cover profile, low
Cover profile, high
Screws
Accessories
Insert tag (unprinted)
Protective strip, transparent
ESO 7
SSt 7
0515200000
0515300000
–
20
301
Housings
Locking socket
RS 45
RS 70
Strip profile
Locking socket
Individual parts
AP 45/RE
AP 45/RE Di
AP 45 / LI Di
AP 45 / LI
Dimensions)
Fixing foot
Total width:
Length:
45 mm
1000 mm/2000 mm
Width: 10 mm
Maß RF
Spacer
Width: 5 mm/15 mm/25 mm/30 mm/45 mm
Width: RS-Br.–2 mm (Ex.: RS=45 mm, LP=43 mm)
Length: 67.8 (–0.2 ) mm
Dim. ZW
Dim. A
Dim. L
Printed circuit board
For horizontal insertion of a printed circuit board
Width:
42 (+0.5) mm
Thickness:
Length:
1.8 (+0.15) mm (DIN 40802 T. 2)
optional/60…2000 mm
Thickness: 1.6 ( 0.2) mm (DIN 40802 Part 2)
Dim. of RS section: printed circuit board length – 4.5 mm
Dim. of ADP section: printed circuit board length – 1 mm
Example: circuit board length 160 mm, RS = 155.5 mm,
ADP = 159 mm
Rated data
Flammability acc. to UL level
Upper temperature limit
V-0 / V-2 strip profile / accessories
70 °C
V-2
100 °C
Ordering data
Type
Cat. No.
Qty.
1
Type
Cat. No.
Qty.
String profile
RS 45 (up to 2000 mm)
RS 45 (up to 1000 mm)
4027750000
8140880000
1
Fixing foot right, with marking facility
Fixing foot right, without marking facility
Fixing foot left, without marking facility
Fixing foot middle (intermediate foot)
Fixing foot (RS 80/RS 100) for TS 32/TS 35
Spacer 5 mm
RFB
0119560000
0126260000
0119660000
0213760000
RFO
RF
20
20
20
RFM
ZW 5
0119760000
0119860000
0126160000
0119960000
0120060000
20
20
20
20
20
Spacer 15 mm
ZW 15
ZW 25
ZW 30
ZW 45
Spacer 25 mm
Spacer 30 mm
Spacer 45 mm
End plate for mounting on rail without cover
End plate for direct mounting without cover
End plate for mounting on rail with low cover
End plate for direct mounting with low cover
End plate for mounting on rail with high cover
End plate for direct mounting with high cover
Cover profile, low
AP 45/LI
AP 45/RE
8143910000 8143900000 20
AP 45/LI Di
AP 45/RE Di 8140870000 8140860000 20
Cover profile, high
Screws
30 x 14
4011200000
–
Accessories
Insert tag (unprinted)
Protective strip, transparent
ESO 7
SSt 7
0515200000
0515300000
–
100
302
Housings
RS 80
RS 100
Strip profile
Strip profile for Euro-cards
AP 111
ADP 11
AP 110
AP 111 D
AP 100
ADP 10
RF 180
AP 110 D
AP 100 D
RS 100
Screws
AP 86
AP 85
ADP 6
AP 80
AP RF80 RE/LT
ADP 5
AP 86 D
RF 180
AP 85 D
RS 80
Screws
AP 80 D
Total width:
Length:
84 mm
2000 mm
Total width:
Length:
104 mm
2000 mm/160 mm
For horizontal insertion of a printed circuit board
Width:
For horizontal insertion of a printed circuit board
Width:
67.8 (+0.2) mm
100 (+0.5) mm
Thickness:
1.8 (+0.15) mm (DIN 40802 T. 2)
Thickness:
1.8 (+0.5) mm (DIN 40802 Part 2)
Dim. RS section printed circuit board length –4.5 mm
Dim. ADP section printed circuit board length –2 mm
Example: circuit board length 160 mm, RS = 155.5 mm,
ADP = 158 mm
Dim. RS section printed circuit board length –4.5 mm
Dim. ADP section printed circuit board length –1 mm
Example: circuit board length 160 mm, RS = 155.5 mm,
ADP = 159 mm
V-0 / V-2 strip profile / accessories
70 °C
V-0 / V-2 strip profile / accessories
70 °C
Type
orange (RAL 2000)
grey (RAL 7032)
Qty.
1
Type
orange (RAL 2000)
grey (RAL 7032)
Qty.
1
RS 80 (2000 mm) grey
RS 80 (2000 mm) orange
4183130000
RS 100 (2000 mm) grey
RS 100 (2000 mm) orange
RS 100 (155 mm)
4010870000
4157440000
1
4144870000
4148400000
1
1
RF 180
1324460000
1773400000
8320300000
20
RF 180
1324460000
1773400000
1773410000
20
AP 80
1324260000
1324360000
20
20
-
AP 80 D
AP RF 80 RE
AP RF 80 LT
AP 85
8156200000
8156210000
AP 100
1185060000
1185160000
1185260000
1185360000
1185460000
1185560000
4169320000
4169330000
4019420000
20
20
-
AP 100 D
1410860000
1411060000
1410960000
1411160000
4167150000
4167160000
4011200000
20 AP 110
20
AP 85 D
20 AP 110 D
20 AP 111
20
AP 86
20
AP 86 D
20 AP 111 D
20
ADP 5 (1000 mm)
ADP 6 (1000 mm)
30 x 14
–
–
–
ADP 10 (2000 mm)
(2 m)
(2 m)
–
ADP 11 (2000 mm)
40 x 14
303
Housings
Housings EG…/RST OST
Dimensions
Connection data
Accessories
RST/EG 7
EG 8 / EG 12
EGR/EG 7
EGR/EGO
EG 8
EG 12
EG 7/35 for TS 35
EG 7/combi foot
RST/OST EG 7
Width (mm)
Dimensions
Width (mm)
10
10
10
EG
8
Height (mm)
Height assembled (mm)
823472 for TS 32
with TS 35 x 7.5
with TS 35 x 15
819383 with combi foot
with TS 35 x 7.5
with TS 35 x 15
with TS 32
Width (mm)
Height (mm) 104.9
12.5
18
with TS 35 x 7.5
with TS 35 x 15
with TS 32
92
96
100
103
100
91
99
EG 12
Width (mm)
93
101
97
Height (mm) 104.9
304
Housings
Housings
Dimensions
Connection data
Accessories
DK 5
DK 6
88,4
77
Dimensions
DK 5
6 mm
9 mm
DK 6
8 mm
9 mm
Terminal width (+ fitting tolerance 0.2 mm)
Insulating stripping length
Connection data
Screw connection, solid
Screw connection, stranded
Connection cross-section
0.5...4 mm2
0.5...4 mm2
AWG 20...12
0.5...4 mm2
0.5...4 mm2
AWG 20...12
Accessories
Type
Cat. No.
Type
Cat. No.
Mounting rail (2 m lenghts)
Y
W
TS 32
0122800000
0383400000
0498000000
0199360000
0383560000
8268870000
TS 32
TS 35x7.5
TS 35x15
EWK 2
EW 35
TS 35x7.5
TS 35x15
EWK 2
EW 35
0383400000
0498000000
0199360000
0383560000
8324560000
V
for TS 32
for TS 35
End bracket
End plate
AP
AP
Marking material*
dekafix 5
dekafix 5
*For more inormation see sectional catalogue 5/installation
products
transparent head-plate
cross-connection
Housings miniconditioner MCZ
Dimensions
Connection data
additional
labelling
Accessories
91
TS-Kontakt
Dimensions
Width (mm) + fitting tolerance 0.2
Insulating stripping length (mm)
Connection data
6
6
Z-spring connection, solid
Z-spring connections, stranded
Connection cross-section
Accessories
0.5…1.5 mm2
0.5…1.5 mm2
AWG 26…16
Type
Cat. No.
Mounting rail (2 m lenghts) W
Mounting rail (2 m lenghts) U
End plate
TS 35 x 7.5
TS 35 x 15
APMCZ 1.5
EW 35
0383400000
0498000000
8389030000
0383560000
0383560000
1608950000
1608960000
1608970000
1608980000
1608990000
1609000000
1609010000
1609020000
1609030000
End bracket for TS 35
EW 35
Cross-connection (pluggable)
ZQV 4 2-pole
ZQV 4 3-pole
ZQV 4 4-pole
ZQV 4 5-pole
ZQV 4 6-pole
ZQV 4 7-pole
ZQV 4 8-pole
ZQV 4 9-pole
ZQV 4 10-pole
305
Housings
Housings
EG 1 - Fig. I
EG 2 - Fig. II
EG…/EG-U/LPU
Dimensions
Connection data
Accessories
Dimensions
Terminal width (+fitting tolerance 0.2 mm)
Insulating stripping length
18 mm
12 mm
20 mm
12 mm
Connection data
Screw connection, solid
Screw connection, stranded
Connection cross-section
0.5…6 mm2
0.5…4 mm2
AWG 20…12
0.5…6 mm2
0.5…4 mm2
AWG 20…12
Accessories
Type
Cat. No.
Type
Cat. No.
Mounting rail (2 m lenghts)
Y
W
TS 32
0122800000
0383400000
0498000000
0199360000
0383560000
0238700000
TS 32
0122800000
0383400000
0498000000
0199360000
0383560000
0238700000
TS 35 x 7.5
TS 35 x 15
EKW 2
TS 35 x 7.5
TS 35 x 15
EKW 2
U
for TS 32
for TS 35
End bracket
EW 35
EW 35
Cross connection wire: 80 mm long, 50-pole/1 mm2
Marking material*
QD 50/grey
dekafix 5
QD 50/grey
dekafix 5
EG 2 – Fig. III
EG 2 – Fig. IV
Dimensions
Terminal width (+fitting tolerance 0.2 mm)
Insulating stripping length
18 mm
18 mm
Connection data
Screw connection, solid
Screw connection, stranded
Tab connection (DIN 46247)
Connection cross-section
2x 0.8 x 2.8 mm or 1x 0.8 x 6.3 mm
2x 0.8 x 2.8 mm
Accessories
Type
Cat. No.
Type
Cat. No.
Mounting rail (2 m lenghts)
Y
W
U
TS 32
0122800000
0383400000
0498000000
0199360000
0383560000
0238700000
TS 32
0122800000
0383400000
0498000000
0199360000
0383560000
0238700000
TS 35 x 7.5
TS 35 x 15
EKW 2
TS 35 x 7.5
TS 35 x 15
EKW 2
End bracket
for TS 32
for TS 35
EW 35
EW 35
Cross connection wire: 80 mm long, 50-pole/1 mm2
Marking material*
QD 50/grey
dekafix 5
QD 50/grey
dekafix 5
* see sectional catalogue 7
306
Housings
EG 3 - Fig. V
SEG-U/LPU
with assembly plate MPL
with assembly plate MPL
22.5 mm
17 mm
20 mm
17 mm
0.5…4 mm2
0.5…2.5 mm2
0.5…4 mm2
0.5…2.5 mm2
AWG 26…14
Type
Cat. No.
Type
Cat. No.
TS 32
0122800000
0383400000
0498000000
0199360000
0383560000
0238700000
TS 32
0122800000
0383400000
0498000000
0199360000
0383560000
0238700000
TS 35 x 7.5
TS 35 x 15
EKW 2
TS 35 x 7.5
TS 35 x 15
EKW 2
EW 35
EW 35
QD 50/grey
dekafix 6.5
QD 50/grey
dekafix 5
dekafix 6.5
EG 4 – Fig. VI
EG 5 – Fig. VII
EG 6
Anreihmaß
22.5 mm
17 mm
22.5 mm
17 mm
0.5…4 mm2
0.5…2.5 mm2
AWG 22…12
0.5…4 mm2
0.5…2.5 mm2
AWG 22…12
Type
Cat. No.
Type
Cat. No.
Type
Cat. No.
TS 32
0122800000
0383400000
0498000000
0199360000
0383560000
0238700000
TS 32
0122800000
0383400000
0498000000
0199360000
0383560000
0238700000
TS 35 x 7.5
TS 35 x 15
0383400000
0498000000
TS 35 x 7.5
TS 35 x 15
EKW 2
TS 35 x 7.5
TS 35 x 15
EKW 2
EW 35
EW 35
EW 35
0383560000
QD 50/grey
dekafix 6.5
QD 50/grey
dekafix 6.5
dekafix 6.5
307
Housings
WAVEBOX S 22.5
WAVEBOX L 22.5
Printed circuit board L 22.5
Printed circuit board S 22.5
WAVEBOX 12.5
WAVEBOX 17.5
308
Housings
Socket blocks BLZ 5.08 / BLZF 5.08
Materials data
Insulating material
Colour
BLZ 5.08/SL 5.08
BLZF 5.08
PBT
PBT
orange
orange
Derating curve
Temperature range
Flammability class
Contact base material
Contact surface
-20.. +100 °C
UL 94 (VO)
CuSn
-20.. +100 °C
UL 94 (VO)
CuSn
Pin header with BLZ(F) / H07V-K1 5 / 3 POE
tin plated
tin plated
Characteristic system values
Pitch
5.08 mm
5.08 mm
≥ 3 mm
Clearance
≥ 2.5 mm
≥ 4.0 mm
Creepage distance
Connection technology
Length of soldering pin
Mounting hole
≥ 4.0 mm
Tension clamp connection
Screw/solder connection
3.2/4.5 mm
ø 1.3 + 0.1 mm
7 mm
7 mm
Insulating stripping length
Terminal screw
Ambient temperature (°C)
M 2.5
5
≥ 10 MΩ
Isolations resistance
Trough resistance
≥ 10 MΩ
≤ 5 mΩ
≤ 5 mΩ
Connectable wires
Terminal range
Derating curve
2
2
0.08...2.5 mm
1.5 mm
2
2
0.5...2.5 mm
0.13...1.5 mm
“e” solid H05(07)V-U
“f” flexible H05(07)V-K
“f” with ferrules
Pin header with BLZ(F) / H05V-K0 75 / 3 POE
2
2
0.5...2.5 mm
0.13...2.5 mm
2
2
0.5...2.5 mm
0.05...2.5 mm
according to DIN 46228/1
with plastic collar
0.5...1.5 mm2
28...14
1.5 mm
2
according to DIN 46228/4
AWG wire
26...14
A3
Plug gauge acc. to EN 60947-1/10.91 Size
Rated data according to VDE
Rated cross-section
Rated current
VDE 0110 2.79
2.5mm2
12A1)
2.5mm2
12A1)
see derating curves2)
Ambient temperature (°C)
see derating curves2)
Current capacity
2.0 kV~
2.0 kV~
Test voltage
0.5 Nm
Nominal torque
Rated data according to
Rated cross-section
Rated current (Tu=20°C)
Rated voltage
VDE 0110 1.89
2
1.5mm
Derating curve
3)
12A
Pin header with BLZ(F) / H07V-K1 5 / 3 POE
250 V
4 kV
3
Rated impulse voltage
Pollution severity
Rated data according to UL
AWG wire
Rated data according to UL
22...12
10 A
26...14
10 A
Rated current
300 V~
300 V~
Rated voltage, industriell
Operation tool
Screwdriver type SD/SDI 5
Ambient temperature (°C)
Approvals
Applied for
List on request
1
)
Rated cross-section and max. number of poles established from derating curve at 20 °C ambient tempera-
ture
2) Further derating curves on demand
309
Housings
Locking socket profiles RS
RS 80
RS 100
Rail mounting without cover
Direct mounting without cover
Rail mounting with low cover
Direct mounting with low cover
Rail mounting with high cover
Direct mounting with high cover
Fixing holes
ADP 5 / ADP 6
ADP 10 / ADP 11
310
Housings
Semi-wire relay socket OS 2 and OS
2/5
Pluggable relay socket RSS 5MM
ꢀ Suitable for PCB mounting
ꢀ For miniature all-or-nothing relays type Tyco SNR,
NAIS APE …
ꢀ Mechanical interlock with eject lever
ꢀ Suitable for PCB mounting
ꢀ For solid state relais Type Opto 22, Crouzet …
ꢀ Secured in socket by fixing screws
integrated in the module
*
* Soldering process ventilation not dimensioned in detail
lock srew
Ordering data
Type
OS2
Cat. No.
Ordering data
Type
Cat. No.
94552100001)
94576400002)
RSS 5 MM 4056360000
OS2/5
Technical data
Input voltage
Technical data
Input voltage
250 V
250 V
5 A
250 V
250 V
6 A
Output voltage
Rated current
Output voltage
Max. switching current
Rated current
5 A
Flammability class acc. to UL 94
V-2
Flammability class acc. to UL 94
V-2
Insulation coordination acc. to EN 50178
Rated voltage
Insulation coordination acc. to EN 50178
Rated voltage
250 V
250 V
Rated impulse voltage
Input circuit
Rated impulse voltage
Input circuit
4 kV (1.2/50 µs)
4 kV (1.2/50 µs)
Output circuit
4 kV (1.2/50 µs)
Output circuit
4 kV (1.2/50 µs)
Input < output
< 8 kV (1.2/50 µs)
Input < output
< 8 kV (1.2/50 µs)
Overvoltage category
Pollution severity
III
2
Overvoltage category
Pollution severity
III
2
Ambient conditions
Ambient temperature
Storage temperature
Ambient conditions
Ambient temperature
Storage temperature
- 25°C … + 50°C
- 40°C … + 85°C
- 25°C … + 50°C
- 40°C … + 85°C
Dimensions
Dimensions
Length / width / height
Soldering pin
49,78 / 12.5 /13.2 mm
3.2 mm
Length / width / height
Soldering pin
30.2 / 5 / 30 mm
3.5 mm
1) equipped with with contact sockets B, C, F, H
2) equipped with with contact sockets A, B, C, F, H
311
相关型号:
15266-0051
0.50mm Pitch Premo-Flex FFC Jumper, Same Side Contacts (Type A), 6 Circuits, 0.03m Cable Length, 0.27mm Cable Thickness, Tin (Sn) Plating
MOLEX
15266-0053
0.50mm Pitch Premo-Flex FFC Jumper, Same Side Contacts (Type A), 6 Circuits,0.051m Cable Length, 0.27mm Cable Thickness, Tin (Sn) Plating
MOLEX
15266-0054
0.50mm Pitch Premo-Flex FFC Jumper, Opposite Side Contacts (Type D), 6 Circuits, 0.051m Cable Length, 0.27mm Cable Thickness, Tin (Sn) Plating
MOLEX
15266-0055
0.50mm Pitch Premo-Flex FFC Jumper, Same Side Contacts (Type A), 6 Circuits, 0.076m Cable Length, 0.27mm Cable Thickness, Tin (Sn) Plating
MOLEX
15266-0056
0.50mm Pitch Premo-Flex FFC Jumper, Opposite Side Contacts (Type D), 6 Circuits, 0.076m Cable Length, 0.27mm Cable Thickness, Tin (Sn) Plating
MOLEX
15266-0057
0.50mm Pitch Premo-Flex FFC Jumper, Same Side Contacts (Type A), 6 Circuits, 0.102m Cable Length, 0.27mm Cable Thickness, Tin (Sn) Plating
MOLEX
15266-0058
0.50mm Pitch Premo-Flex FFC Jumper, Opposite Side Contacts (Type D), 6 Circuits, 0.102m Cable Length, 0.27mm Cable Thickness, Tin (Sn) Plating
MOLEX
©2020 ICPDF网 联系我们和版权申明