MR12W472-PGL [WALSIN]
Sulfuration resistant ASTM B-809 60C 500 hrs;型号: | MR12W472-PGL |
厂家: | Walsin Technology |
描述: | Sulfuration resistant ASTM B-809 60C 500 hrs |
文件: | 总9页 (文件大小:542K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Approval sheet
MR12, MR10, MR08, MR06, MR04
1%, 5%
Thick film General Purpose Chip Resistors
Size 1206, 1210, 0805, 0603, 0402
Automotive & Military Compliant
*Contents in this sheet are subject to change without prior notice.
Page 1 of 9
ASC_MR_V08
DEC 2017
Approval sheet
FEATURE
1. High reliability and stability ±1%
2. Sulfuration resistant ASTM B-809 60’C 500 hrs
3. Automotive AEC Q-200 & Military MIL-STD Compliant
4. 100% CCD inspection
5. RoHS 2 compliant and Halogen free products
APPLICATION
Automotive application
Consumer electrical equipment
EDP, Computer application
Telecom application
DESCRIPTION
The resistors are constructed in a high grade ceramic body (aluminum oxide). Internal metal electrodes are
added at each end and connected by a resistive paste that is applied to the top surface of the substrate. The
composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to
within tolerance by laser cutting of this resistive layer.
The resistive layer is covered with a protective coat. Finally, the two external end terminations are added. For
ease of soldering the outer layer of these end terminations is a Tin (lead free) alloy.
Fig 1. Construction of a Chip-R
Page 2 of 9
ASC_MR_V08
DEC 2017
Approval sheet
QUICK REFERENCE DATA
Item
General Specification
MR08
Series No.
Size code
MR10
MR12
MR06
MR04
1210(3225)
1206(3216)
0805(2012)
0603(1608)
0402(1005)
Resistance
Range
1~10M (5% tolerance), Jumper
1~10M (1% tolerance)
Resistance
Tolerance
1%
E96/E24
5%
1%
5%
1%
5%
1%
5%
1%
E96/E24
5%
E24
E96/E24
E24
E96/E24
E24
E96/E24
E24
E24
TCR (ppm/C)
R > 1M
200
100
200
100
200
100
200
100
200
100
10 < R ≦ 1M
R ≦ 10
-200~+400
1/2 W
-200~+400
1/4 W
-200~+400
1/4 W
-200~+400
1/8 W
-200~+400
1/10 W
Max. dissipation
@ Tamb=70C
Max. Operation
Voltage (DC or
RMS)
200V
400V
200V
400V
150V
300V
75V
50V
Max. Overload
Voltage (DC or
RMS)
150V
100V
Climatic
category
55/155/56
(IEC 60068)
Note :
1.
This is the maximum voltage that may be continuously supplied to the resistor element, see “IEC publication
60115-8”
2.
Max. Operation Voltage : So called RCWV (Rated Continuous Working Voltage) is determined by
or Max. RCWV listed above, whichever is lower.
RCWV RatedPowerResistance Value
The resistance of Jumper is defined <0.05.
3.
DIMENSIONS (unit : mm)
MR10
MR12
MR08
MR06
MR04
L
W
T
3.10 0.10
2.60 0.10
0.55 0.10
0.50 0.20
0.50 0.20
3.10 0.10
1.60 0.10
0.60 0.15
0.45 0.20
0.50 0.20
2.00 0.10
1.25 0.10
0.50 0.15
0.40 0.20
0.40 0.20
1.60 0.10
0.80 0.10
0.45 0.15
0.30 0.15
0.30 0.10
1.00 0.05
0.50 0.05
0.35 0.05
0.25 0.10
0.20 0.10
Tb
Tt
Page 3 of 9
ASC_MR_V08
DEC 2017
Approval sheet
MARKING
Size \ Nr. Of digit of code\tolerance
1210/1206/0805
0603 (1608)
5%
1%
3-digits marking
3-digits marking
4-digits marking
3-digits marking
N0 MARKING
0402(1005)
3-digits marking(5% : 1206, 1210, 0805 & 0603 )
Each resistor is marked with a three digits code on the protective coating to designate the nominal resistance value.
3-digits marking(1% : 0603)
Nominal resistance
1.E-24 series
Description
As 0603 WR06X 5%.
2.E-96 series
The 1st two digit codes are referring to the CODE on the table, the 3rd code is the index of resistance
value :
Y=10-2,X=10-1,A=100,B=101,C=102,D=103,E=104,F=105
EX :
17.8Ω=25X,178Ω=25A,1K78 =25B
17K8=25C, 178K=25D, 1M78=25E
3. Remark
There is no marking for the items are not under E-24 and E-96 series
CODE R_value CODE R_value CODE R_Value CODE R_value CODE R_value CODE R_value CODE R_value CODE R_value
01
02
03
04
05
06
07
08
09
10
11
12
100
102
105
107
110
113
115
118
121
124
127
130
13
14
15
16
17
18
19
20
21
22
23
24
133
137
140
143
147
150
154
158
162
165
169
174
25
26
27
28
29
30
31
32
33
34
35
36
178
182
187
191
196
200
205
210
215
221
226
232
37
38
39
40
41
42
43
44
45
46
47
48
237
243
249
255
261
267
274
280
287
294
301
309
49
50
51
52
53
54
55
56
57
58
59
60
316
324
332
340
348
357
365
374
383
392
402
412
61
62
63
64
65
66
67
68
69
70
71
72
422
432
442
453
464
475
487
499
511
523
536
549
73
74
75
76
77
78
79
80
81
82
83
84
562
576
590
604
619
634
649
665
681
698
715
732
85
86
87
88
89
90
91
92
93
94
95
96
750
768
787
806
825
845
866
887
909
931
953
976
4-digits marking(1% : 1210/1206/0805)
Each resistor is marked with a four digits code on the protective coating to designate the nominal resistance value.
Example
RESISTANCE
10
12
100
6800
47000
100
120
101
682
473
3-digits marking(1210, 1206, 0805, 0603 5% )
4-digits marking
10R0
12R0
1000
6801
4702
Page 4 of 9
ASC_MR_V08
DEC 2017
Approval sheet
FUNCTIONAL DESCRIPTION
Product characterization
Standard values of nominal resistance are taken from the E24 series for resistors with a tolerance of 5%,
and E24+E96 series for resistors with a tolerance of 1%. The values of the E24/E96 series are in accordance
with “IEC publication 60063”.
Derating
The power that the resistor can dissipate depends on the operating temperature; see Fig.2.1
Figure 2.1 Maximum dissipation in percentage of rated power as a
function of the ambient temperature
MOUNTING
Due to their rectangular shapes and small tolerances, Surface Mountable Resistors are suitable for handling by
automatic placement systems.
Chip placement can be on ceramic substrates and printed-circuit boards (PCBs).
Electrical connection to the circuit is by individual soldering condition.
The end terminations guarantee a reliable contact.
Page 5 of 9
ASC_MR_V08
DEC 2017
Approval sheet
SOLDERING CONDITION
The robust construction of chip resistors allows
them to be completely immersed in a solder bath
260C for 10 seconds. Therefore, it is possible to
mount Surface Mount Resistors on one side of a
PCB and other discrete components on the
reverse (mixed PCBs).
of
Surface Mount Resistors are tested for
solderability at 235C during 2 seconds. The test
condition for no leaching is 260C for 30 seconds.
Typical examples of soldering processes that
provide reliable joints without any damage are
given in Fig 3.
Fig 3. Infrared soldering profile for Chip Resistors
CATALOGUE NUMBERS
The resistors have a catalogue number starting with .
MR12
X
472_
Resistance code
J
T
L
Automotive
code
Type code
X :
Tolerance
F : 1%
Packaging code
Termination
code
T
: 7” Reeled taping
: 7” Reel 20K/RL
5%, E24: 2 significant digits
followed by no. of zeros and
a blank
MR10 : 1210
MR12 : 1206
MR08 : 0805
MR06 : 0603
MR04: 0402
L
= Sn base
(lead free)
D
Jumper
J : 5%
0402 size
5%, 1 ~ 10M
1%, 10 ~ 1M
W :
P : Jumper
220 = 221_
4K7 = 472_
Q
G
B
: 10” Reeled taping
: 13” Reeled taping
10 = 100_
: Bulk
1%, < 10; >1M
1 =1R0_
( “_” means a blank )
Resistance code
1%, E24+E96: 3 significant
digits followed by no. of
zeros
E96: 37.4K = 3742
E24: 220 = 2200
4K7 = 4701
10 = 10R0
1 =1R00
* Anti-Sulfuration test conditions: ASTM B-809-95 60’C 500hrs, criteria: +/-1% !
MR10, MR12,MR08,MR06:
1. Reeled tape packaging : 8mm width paper taping 5000pcs per 7” reel, 10kpcs per 10” reel, 20kpcs per 13” reel.
2. Bulk packaging : 5000pcs per poly-bag
MR04:
1. Reeled tape packaging : 8mm width paper taping 10,000pcs per reel,
2. Bulk packaging
: 10,000pcs per poly-bag
Page 6 of 9
ASC_MR_V08
DEC 2017
Approval sheet
TEST AND REQUIREMENTS
Essentially all tests are carried out according to the schedule of IEC publication 115-8, category
LCT/UCT/56(rated temperature range : Lower Category Temperature, Upper Category Temperature; damp
heat, long term, 56 days). The testing also meets the requirements specified by EIA, EIAJ and JIS.
The tests are carried out in accordance with IEC publication 68, "Recommended basic climatic and mechanical
robustness testing procedure for electronic components" and under standard atmospheric conditions according
to IEC 60068-1, sub-clause 5.3. Unless otherwise specified, the following value supplied :
Temperature: 15°C to 35°C.
Relative humidity: 45% to 75%.
Air pressure: 86kPa to 106 kPa (860 mbar to 1060 mbar).
All soldering tests are performed with midly activated flux.
REQUIREMENTS
TEST
PROCEDURE / TEST METHOD
Resistance
0
Electrical Characteristics - DC resistance values measurement
- Temperature Coefficient of Resistance (T.C.R)
Within the specified tolerance
Refer to “QUICK REFERENCE DATA”
Natural resistance change per change in degree centigrade.
JISC5201-1: 1998
Clause 4.8
R2 R
R
1t2 t1
106 (ppm/C) t1 : 20°C+5°C-1°C
1
R1 : Resistance at reference temperature
R2 : Resistance at test temperature
Un-mounted chips completely immersed for 10±1second in a
SAC solder bath at 270℃±5ºC
R/R max. (0.5%+0.05)
Resistance to soldering
heat (R.S.H)
No visible damage
<50m
MIL-STD-202
method 210
a) Bake the sample for 155℃ dwell time 4hrs/ solder dipping
235℃/ 5sec.
Solderability
95% coverage min., good tinning and
no visible damage
J-STD-002
b) Steam the sample dwell time 1 hour/ solder dipping
260℃/ 7sec.
1000 cycles, -55℃ ~ +155℃, dwell time 5~10min
Temperature cycling
JESD22
R/R max. (0.5%+0.05)
<50m
No visible damage
method JA-104
652C, 80~100% RH, 10 cycles, 24 hours/ cycle
1000+48/-0 hours; 85C, 85% RH, 10% of operation power
1000+48/-0 hours; 35% of operation power, 1252C
Moisture Resistance
MIL-STD-202
method 106
R/R max. (0.5%+0.05)
<50m
No visible damage
Bias Humidity
MIL-STD-202
method 103
R/R max. (1%+0.05)
No visible damage
<50m
<50m
Operational Life
MIL-STD-202 method
108
R/R max. (1%+0.05)
No visible damage
Page 7 of 9
ASC_MR_V08
DEC 2017
Approval sheet
TEST
REQUIREMENTS
PROCEDURE / TEST METHOD
Resistance 5%, 1%
0
High Temperature
Exposure
1000+48/-0 hours; without load in a temperature chamber
R/R max. (1%+0.05)
controlled 1553C
No visible damage
<50m
MIL-STD-202
method 108
Mechanical Shock
MIL-STD-202
method 213
1/2 Sine Pulse / 1500g Peak / Velocity 15.4ft/sec
Within
the
specified
tolerance
<50m
<50m
No visible damage
Board Flex
Resistors mounted on a 90mm glass epoxy resin PCB(FR4),
bending once 2mm for 10sec
R/R max. (1.0%+0.05).
AEC-Q200-005
Terminal strength
AEC-Q200-006
No visible damage
Pressurizing force: 1Kg, Test time: 60±1sec.
No remarkable damage or removal of
the
terminations
Vibration
Test 5g’s for 20min., 12 cycles each of 3 orientations
R/R max. (1.0%+0.05)
MIL-STD-202
method 204
Thermal shock
MIL-STD-202
method 107
ESD
No visible damage
<50m
Test –55 to 155℃/ dwell time 15min/ Max transfer time 20sec R/R max. (0.5%+0.05)
300cycles
No visible damage
<50m
<50m
Test contact 1.0KV ( 0.5KV for 0402 only)
R/R max. (1%+0.05)
AEC-Q200-002
No visible damage
TEST CONDITION FOR JUMPER (0 )
Item
Power Rating At 70C
Resistance
MR10
1/2W
MR12
1/4W
MR08
1/4W
MR06
1/8W
MR04
1/10W
MAX.50m
2A
Rated Current
3A
2A
5A
1.5A
3.5A
1A
3A
Peak Current
7.5A
5A
Operating Temperature
-55 ~ +155C
Page 8 of 9
ASC_MR_V08
DEC 2017
Approval sheet
PACKAGING
Paper Tape specifications (unit :mm)
Series No.
MR10
A
B
W
F
E
3.60±0.20
3.60±0.20
2.40±0.20
1.90±0.20
1.20±0.10
3.00±0.20
2.00±0.20
1.65±0.20
1.10±0.20
0.70±0.10
MR12
8.00±0.30
3.50±0.20
1.75±0.10
MR08
MR06
MR04
Series No.
MR10/12/08
MR06
P1
P0
T
D
Max. 1.0
0.65±0.05
0.40±0.05
4.00±0.10
2.00±0.10
0.1
4.00±0.10
1.50
0.0
MR04
7” Reel dimensions
Symbol
(unit : mm)
A
B
C
D
13.0±0.2
9.0±0.5
178.0±2.0
60.0±1.0
Page 9 of 9
ASC_MR_V08
DEC 2017
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明