AMLPF16082G5WM0T29 [WALSIN]
Low Profile Thickness;型号: | AMLPF16082G5WM0T29 |
厂家: | Walsin Technology |
描述: | Low Profile Thickness |
文件: | 总6页 (文件大小:576K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Approval sheet
AMLPF Series – 1608(0603)- RoHS Compliance
MULTILAYER CERAMIC LOW PASS FILTER
Halogens Free Product
LTE B40/B41 Band RF Application
Automotive
Qualified to AEC-Q200
P/N: AMLPF16082G5WM0T29
*Contents in this sheet are subject to change without prior notice.
Page 1 of 6
ASC_AMLPF16082G5WM0T29_V01
Jul. 2018
Approval sheet
FEATURES
1.
2.
3.
4.
5.
6.
Miniature footprint: 1.6X 0.8 X 0.6 mm3
Low Profile Thickness
Low Insertion loss
High Rejection Rate
High attenuation on 2nd harmonic suppressed
LTCC process
APPLICATIONS
1.
LTE、B40/B41 band RF applications
2.
Bluetooth, Wireless LAN 802.11b/g, HomeRF
CONSTRUCTION
Top view
P3
P2
P1
PIN
P1
P2
P3
Definition
GND
PIN
P4
P5
P6
Definition
GND
IN
OUT
GND
GND
P4
P5
P6
DIMENSIONS
Figure
Symbol
Dimension (mm)
L
W
T
1.60 ± 0.10
0.80 ± 0.10
0.60 ± 0.10
0.175± 0.10
0.25 ± 0.10
0.25 ± 0.10
0.50 ± 0.10
0.15 ± 0.10
A
B
C
D
E
Top view
Bottom view
Side view
Page 2 of 6
ASC_AMLPF16082G5WM0T29_V01
Jul. 2018
Approval sheet
ELECTRICAL CHARACTERISTICS
Specification
AMLPF16082G5WM0T29
Frequency range
2300~2690 MHz
0.9 dB max. (typ. 0.4 dB) at +25C
1.2 dB max. at -55C~ +125 C
25dB min. @ 4600~5400 MHz
23dB min. @ 6900~8070 MHz
Insertion Loss
Attenuation
VSWR
2 max.
50 Ω
Impedance
Moisture sensitivity levels
MSL is LEVEL 1 (Refer to : IPC/JEDEC J-STD-020)
Operating & Storage Condition (Component)
Operation Temperature Range: -55C ~ +125C
Storage Temperature Range: -55C ~ +125C
Storage Condition before Soldering (Included packaging material)
Storage Temperature Range: +5 ~ +40 ℃
Humidity: 30 to 70% relative humidity
Typical Electrical Chart
LAND PATTERN
Figure
Unit : mm
Line width to be designed to match 50 Ω characteristic impedance, depending on PCB material and thickness.
Page 3 of 6
ASC_AMLPF16082G5WM0T29_V01
Jul. 2018
Approval sheet
RELIABILITY TEST
TEST
PROCEDURE / TEST METHOD
REQUIREMENT
Resistance to soldering heat
(R.S.H)
MIL-STD-202
Un-mounted chips completely immersed No mechanical damage.
for 10±1second in a SAC solder bath at
270℃±5ºC
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
method 210
Loss of metallization on the edges of each
electrode shall not exceed 25
Solderability
J-STD-002
* Condition A
All terminations shall exhibit a continuous
solder coating free from
defects from a minimum of 95% of the critical
surface area of any individual termination.
Un-mounted chips 4hrs / 155C*dry then
completely immersed for 50.5 sec in
solder bath at 2355C.
* Condition B
Un-mounted chips steam 8 hrs then
completely immersed for 101 sec. in
solder bath at 260+0/-5C.
1000 cycles, -55℃ ~ +125℃, dwell time
30min
Temperature cycling
JESD22
method JA-104
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Humidity
MIL-STD-202
method 103
No mechanical damage.
1000+48/-0 hours; 85C, 85% RH
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
High Temperature Exposure
MIL-STD-202
method 108
1000+48/-0 hours; without load in a
No mechanical damage.
temperature chamber controlled 125±3°C Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Mechanical Shock
MIL-STD-202
method 213
1/2 Sine Pulse / 100g Peak / Velocity
12.3ft/sec
No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Board Flex
RF component mounted on a 90mm glass No mechanical damage.
epoxy resin PCB(FR4), bending once
2mm for 60sec
Electrical specification shall satisfy the
AEC-Q200-005
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Terminal strength
AEC-Q200-006
Pressurizing force: 1.8Kg, Test time:
60±1sec.
No remarkable damage or removal of the
terminations
Only 0402 for 1.0kg/60sec
Vibration
MIL-STD-202
method 204
Test 5g’s for 20min., 12 cycles each of 3 No mechanical damage.
orientations Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
ESD
AEC-Q200-002
Test contact 1.0KV ( 0.5KV for 1005 only) No mechanical damage.
Electrical specification shall satisfy the
descriptions in electrical characteristics under
the operational temperature range within -55 ~
125°C.
Page 4 of 6
ASC_AMLPF16082G5WM0T29_V01
Jul. 2018
Approval sheet
SOLDERING CONDITION
Typical examples of soldering processes that provide reliable joints without any damage are given in Fig 2.
Fig 2. Infrared soldering profile
ORDERING CODE
AM
Walsin
LPF
Product Code
LPF :
1608
Dimension code
Per 2 digits of Length, Width
e.g:1608:
2G5
WM0T29
Specification
Design Code
Central Frequency
2G5: 2.5GHz
Automotive
device
Low Pass Filter
L=1.6mm,
W= 0.8mm,
Minimum Ordering Quantity: 4000 pcs per reel.
PACKAGING
Paper Tape specifications (unit :mm)
Index
Ao
Bo
T
W
D
Dimension (mm)
Index
1.55 + 0.05
Po
0.975 0.10
E
1.76 0.10
F
0.75 0.10
P1
8.0 0.10
P2
Dimension (mm)
1.75 0.10
3.50 0.05
4.00 0.10
4.00 0.10
2.00 0.05
Page 5 of 6
ASC_AMLPF16082G5WM0T29_V01
Jul. 2018
Approval sheet
Reel dimensions
B
A
C
Index
A
B
C
Φ178.0
Φ60.0
Φ13.0
Dimension (mm)
Taping Quantity: 4000 pieces per 7” reel
CAUTION OF HANDLING
Limitation of Applications
Please contact us before using our products for the applications listed below which require especially high reliability for
the prevention of defects, which might directly cause damage to the third party’s life, body or property.
(1) Aircraft equipment
(2) Aerospace equipment
(3) Undersea equipment
(4) Medical equipment
(5) Disaster prevention / crime prevention equipment
(6) Traffic signal equipment
(7) Transportation equipment (vehicles, trains, ships, etc.)
(8) Applications of similar complexity and /or reliability requirements to the applications listed in the above.
Storage condition
(1) Products should be used in 6 months from the day of WALSIN outgoing inspection.
(2) Storage environment condition.
Products should be storage in the warehouse on the following conditions.
Temperature
Humidity
: +5 to +40℃
: 30 to 70% relative humidity
Don’t keep products in corrosive gases such as sulfur. Chlorine gas or acid or it may cause oxidization of
electrode, resulting in poor solderability.
Products should be storage on the palette for the prevention of the influence from humidity, dust and son on.
Products should be storage in the warehouse without heat shock, vibration, direct sunlight and so on.
Products should be storage under the airtight packaged condition.
Page 6 of 6
ASC_AMLPF16082G5WM0T29_V01
Jul. 2018
相关型号:
©2020 ICPDF网 联系我们和版权申明