PSRL5016U4-12 [WALL]

Active PFC 400 Watt Single Output AC/DC Switching Power Supply; 主动式PFC 400瓦单输出AC / DC开关电源


型号：	PSRL5016U4-12
厂家：	WALL INDUSTRIES,INC.
描述：	Active PFC 400 Watt Single Output AC/DC Switching Power Supply 主动式PFC 400瓦单输出AC / DC开关电源开关功率因数校正
文件：	总3页 (文件大小：244K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PSRL5016U4 Series

Active PFC

400 Watt Single Output

AC/DC Switching Power Supply

FEATURES

● 2 Year Warranty

● Optional Top Cover Available

● Universal AC Input / Full Range

● Remote Sense & Remote On/Off

● High Power Density: 7.15 watts/cu in.

● Power Factor Corrected to EN61000-3-2 Class D

● Approved to UL/CUL/TUV/CB/CE & Class B Emissions

● Providing Peak Power 700W within 500uS Duty Duration

● U-Chassis & Enclosed with Built-in Fan Mechanical Options

● Protections: Short Circuit/ Overload/ Over Voltage/ Over Temp

PSRL5016U4 Series: (U-Chassis): 7(L) x 4(W) x 2(H) inches

PSRL5016E4 Series: (Enclosed with built-in fan): 8(L) x 4(W) x 2(H) inches

SPECIFICATIONS: PSRL5016U4 Series

All specifications are based on 25^oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.

We reserve the right to change specifications based on technological advances.

INPUT SPECIFICATIONS

Input Voltage

90 – 264VAC Full Range

Input Frequency

Input Current

47 to 63Hz

5A at 90VAC full load

Inrush Current

35A max @ 230VAC with full load and cold start.

1.5mA @ 240VAC

Defined INH (Pin 4) on CON3, requiring a TTL low signal to inhibit output.

Leakage Current

Remote ON/OFF

OUTPUT SPECIFICATIONS

Output Voltage

See Table

Output Power Range

Output Adjustability

Total Regulation

400 Watts max with airflow. (See Note 2)

Output user adjustable ±5% minimum.

±1%

See Table

Output Current

Ripple & Noise (peak to peak)

Transient Response

Hold-Up Time

±1%

Returns to within 1% in less than 2.5ms for a 50% load change and the peak transient does not excess 5%.

20ms min. at 80% of full load.

Overshoot

Turn-On & Off overshoot < 5% over nominal voltage.

1 second maximum at 120VAC.

Designated as V1S+ (Pin1) and V1S- (Pin2) on the CON3. Voltage compensates for up to 0.5V line drop.

Turn On Delay

Remote Sense

PROTECTION

Over Voltage Protection

Short Circuit Protection

Over-Temperature Protection

Over-Power Protection

Input Voltage Protection

Input Circuit Protection (Primary)

GENERAL SPECIFICATIONS

Efficiency

Unit latching down when output exceeds 130% and recycle AC input to reset.

Trip without damage and auto-recovery.

Unit protected of excessive operating ambient 85°C and automatic recovery.

Hiccup mode 110-140% and auto-recovery.

Power shut down under 80 ±5VAC, and recovered over 86VAC.

One 250V/ 8A fuse inserted.

80% minimum (Measuring at 230VAC and full load).

1500 VAC input line to chassis (10mA DC cut off current); 3000VAC between primary and secondary

windings. Primary to core 1500VAC. All for 3 seconds.

Withstand Voltage

Burn In

PFC

45 ±5°C for one hour @ 230VAC with full load.

Active power factor correction meets EN61000-3-2 class D.

Designated as PG on the CON3 will go high 100-500ms after regulation and goes low 1ms before loss of

Power Good

Grounding Test

LED Display

regulation.

Apply 25A from ground pin of the three prong plug to the far most earth. Max allowable resistance is 0.1 ohm.

Bi-color LED1 emit green for Power On and emit orange when protection is enabled or INH is applied a low

signal.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

PSRL5016U4 Series

Active PFC

400 Watt Single Output

AC/DC Switching Power Supply

SPECIFICATIONS (CONTINUED)

ENVIRONMENTAL SPECIFICATIONS

Operating Temperature

Storage Temperature

0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.

-20°C to +85°C

Operating Humidity

5% to 90% RH, non-condensing

5% to 95% RH, non-condensing

5 ~ 50Hz, acceleration 7.35 m/(s x s) on X, Y, and Z Axis.

Storage Humidity

Vibration

PSRL5016U4 Series (U-Chassis): 22CFM forced airflow to achieve maximum power.

Cooling

PSRL5016E4 Series (Enclosed with built-in fan): Self cooled by built-in fan.

12VDC/400mA is available to drive an external fan.

100,000 hours (according to MIL-HBK-217F) at 30°C.

Fan Drive

MTBF

PHYSICAL SPECIFICATIONS

PSRL5016U4 Series (U-Chassis): 950g

Weight

PSRL5016E4 Series (Enclosed with built-in fan): 1050g

PSRL5016U4 Series (U-Chassis): 7(L) x 4(W) x 2(H) inches.

PSRL5016E4 Series (Enclosed with built-in fan): 8(L) x 4(W) x 2(H) inches.

Dimensions

Warranty

SAFETY

Emissions

2 years

FCC part15, CISPR 22 Class B, Conducted.

Approved to UL60950-1, CSA C22.2 No. 60950-1-03, TUV EN60950-1, CE Mark (LVD) EN61000-3-2,3, &

IEC61000-4 Series Regulations and CB.

Safety Regulations

OUTPUT VOLTAGE / CURRENT RATING CHART

Model

Output Voltage Range Preset Voltage Output Current

Regulation

Ripple & Noise

PSRL5016U4-12

PSRL5016U4-18

PSRL5016U4-24

PSRL5016U4-36

PSRL5016U4-48

12 - 15 VDC

16 - 21 VDC

22 - 30 VDC

31 - 41 VDC

42 - 55 VDC

12 VDC

18 VDC

24 VDC

36 VDC

48 VDC

33.34A

25A

±1%

18.19A

12.9A

9.53A

NOTES

1. PSRL5016U4 Series is designated as PSRL5016xy-z where x = U (U-Chassis Type), y = 4 for output power of 400W, and

z = 12, 18, 24, 36, or 48 for output voltage.

2. PSRL5016E4 Series: Self-cooled by built-in fan; PSRL5016U4 Series: 22 CFM forced airflow to achieve maximum power.

3. Providing peak current for 500uS with standard models, longer duty duration should contact manufacture.

4. All output ranges are covered in agencies certification and preset voltage will be set as standard mode if any request other

than standard output then should contact us in advance.

5. 1% minimum load is required to maintain the ripple and regulation.

6. Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output terminals with parallel 0.1µF ceramic and 22µF

electrolytic capacitors.

7. Output is fully isolated.

8. Optional top cover available please call factory for ordering details.

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

PSRL5016U4 Series

Active PFC

400 Watt Single Output

AC/DC Switching Power Supply

MECHANICAL DRAWINGS

PSRL5016E4 Series (Enclosed with built-in Fan Type): 8(L) x 4(W) x 2(H) inches; Weight: 1050g

PSRL5016U4 Series (U-Chassis Type): 7(L) x 4(W) x 2(H) inches; Weight: 950g; Option: Top Cover

I/O CONNECTOR PIN ASSIGNMENT

AC Input Connector (CON1):

PSRL5016U4 Series: Mating Molex Part No. 09-91-0500 equivalent (5 pin, 3 used), or M3, 3 pins terminal block 8.25mm center.

PSRL5016E4 Series: IEC320 or equivalent Snap-in mounting type or M3.5, 6 pins Terminal block 9.5mm center.

Output Connector (CON2):

Mating Molex 14 pins (09-91-2000), or Howder (HD-121-6P) M3.5, 6 pins terminal block, 9.5MM Center.

Output Pin Assignment:

Output Pin Connection

(See table at right).

Howder

Pins 1 – 3

Pins 4 – 6

Molex

Logic signal connectors (CON3):

Mating JST XHP-5 or equivalent (CHYAO SHIUNN JS-2001-05).

Mating Pins: JST SXH-002T-P0.6 for AWG 30 to 26.

Vo+

Vo-

Pins 1 – 7

Pins 8 – 14

Mounting Inserts:

4 Places 6-32. Max. Penetration 0.13” on bottom side and 4 places 0.25” on both sides.

Fan Drive:

Mating JST XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02).

Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833

603-778-2300 www.wallindustries.com Fax 603-778-9797

相关型号：