PSRL5016U3-12 [WALL]
Active PFC 300 Watt Single Output AC/DC Switching Power Supply; 主动式PFC 300瓦单输出AC / DC开关电源型号: | PSRL5016U3-12 |
厂家: | WALL INDUSTRIES,INC. |
描述: | Active PFC 300 Watt Single Output AC/DC Switching Power Supply |
文件: | 总3页 (文件大小:243K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PSRL5016U3 Series
Active PFC
300 Watt Single Output
AC/DC Switching Power Supply
FEATURES
● 2 Year Warranty
● Optional Top Cover Available
● Universal AC Input / Full Range
● Remote Sense & Remote On/Off
● High Power Density: 7.15 Watts/cu in.
● Power Factor Corrected to EN61000-3-2 Class D
● Approved to UL/CUL/TUV/CB/CE & Class B Emissions
● Providing Peak Power 700W within 500uS Duty Duration
● U-Chassis & Enclosed with Built-in Fan Mechanical Options
● Protections: Short Circuit/ Overload/ Over Voltage/ Over Temp
PSRL5016U3 Series: (U-Chassis): 7(L) x 4(W) x 2(H) inches
PSRL5016E3 Series: (Enclosed with built-in fan): 8(L) x 4(W) x 2(H) inches
SPECIFICATIONS: PSRL5016U3 Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
90 – 264VAC Full Range
47 to 63Hz
Input Frequency
Input Current
5A at 90VAC full load
35A max @ 230VAC with full load and cold start.
1.5mA @ 240VAC
Inrush Current
Leakage Current
Remote ON/OFF
Defined INH (Pin 4) on CON3, requiring a TTL low signal to inhibit output.
OUTPUT SPECIFICATIONS
Output Voltage
Output Power Range
Output Adjustability
Total Regulation
See Table
300 Watts max with airflow. (See Note 2)
Output user adjustable ±5% minimum.
±1%
Output Current
See Table
Ripple & Noise (peak to peak)
Transient Response
Hold-Up Time
±1%
Returns to within 1% in less than 2.5ms for a 50% load change and the peak transient does not excess 5%.
20ms min. at 80% of full load.
Turn-On & Off overshoot < 5% over nominal voltage.
1 second maximum at 120VAC.
Overshoot
Turn On Delay
Remote Sense
PROTECTION
Designated as V1S+ (Pin1) and V1S- (Pin2) on the CON3. Voltage compensates for up to 0.5V line drop.
Over Voltage Protection
Short Circuit Protection
Over-Temperature Protection
Over-Power Protection
Input Voltage Protection
Input Circuit Protection (Primary)
GENERAL SPECIFICATIONS
Efficiency
Unit latching down when output exceeds 130% and recycle AC input to reset.
Trip without damage and auto-recovery.
Unit protected of excessive operating ambient 85°C and automatic recovery.
Hiccup mode 110-140% and auto-recovery.
Power shut down under 80 ±5VAC, and recovered over 86VAC.
One 250V/ 8A fuse inserted.
80% minimum (Measuring at 230VAC and full load).
1500 VAC input line to chassis (10mA DC cut off current); 3000VAC between primary and secondary
windings. Primary to core 1500VAC. All for 3 seconds.
Withstand Voltage
Burn In
PFC
45 ±5°C for one hour @ 230VAC with full load.
Active power factor correction meets EN61000-3-2 class D.
Designated as PG on the CON3 will go high 100-500ms after regulation and goes low 1ms before loss of
Power Good
Grounding Test
LED Display
regulation.
Apply 25A from ground pin of the three prong plug to the far most earth. Max allowable resistance is 0.1 ohm.
Bi-color LED1 emit green for Power On and emit orange when protection is enabled or INH is applied a low
signal.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL5016U3 Series
Active PFC
300 Watt Single Output
AC/DC Switching Power Supply
SPECIFICATIONS (CONTINUED)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.
-20°C to +85°C
Operating Humidity
5% to 90% RH, non-condensing
5% to 95% RH, non-condensing
5 ~ 50Hz, acceleration 7.35 m/(s x s) on X, Y, and Z Axis.
Storage Humidity
Vibration
PSRL5016U3 Series (U-Chassis): 22CFM forced airflow to achieve maximum power.
Cooling
PSRL5016E3 Series (Enclosed with built-in fan): Self cooled by built-in fan.
12VDC/400mA is available to drive an external fan.
100,000 hours (according to MIL-HBK-217F) at 30°C.
Fan Drive
MTBF
PHYSICAL SPECIFICATIONS
PSRL5016U3 Series (U-Chassis): 950g
Weight
PSRL5016E3 Series (Enclosed with built-in fan): 1050g
PSRL5016U3 Series (U-Chassis): 7(L) x 4(W) x 2(H) inches.
PSRL5016E3 Series (Enclosed with built-in fan): 8(L) x 4(W) x 2(H) inches.
Dimensions
Warranty
SAFETY
Emissions
2 years
FCC part15, CISPR 22 Class B, Conducted.
Approved to UL60950-1, CSA C22.2 No. 60950-1-03, TUV EN60950-1, CE Mark (LVD) EN61000-3-2,3, &
IEC61000-4 Series Regulations and CB.
Safety Regulations
OUTPUT VOLTAGE / CURRENT RATING CHART
Model
Output Voltage Range Preset Voltage Output Current
Regulation
Ripple & Noise
PSRL5016U3-12
PSRL5016U3-18
PSRL5016U3-24
PSRL5016U3-36
PSRL5016U3-48
12 - 15 VDC
16 - 21 VDC
22 - 30 VDC
31 - 41 VDC
42 - 55 VDC
12 VDC
18 VDC
24 VDC
36 VDC
48 VDC
25A
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
±1%
18.75A
13.64A
9.68A
7.15A
NOTES
1. PSRL5016U3 Series is designated as PSRL5016xy-z where x = U (U-Chassis type), y = 3 for output power of 300W, and
z = 12, 18, 24, 36, or 48 for output voltage.
2. PSRL5016E3 Series: Self-cooled by built-in fan; PSRL5016U3 Series: 22 CFM forced airflow to achieve maximum power.
3. Providing peak current for 500uS with standard models, longer duty duration should contact manufacture.
4. All output ranges are covered in agencies certification and preset voltage will be set as standard mode if any request other
than standard output then should contact us in advance.
5. 1% minimum load is required to maintain the ripple and regulation.
6. Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output terminals with parallel 0.1µF ceramic and 22µF
electrolytic capacitors.
7. Output is fully isolated.
8. Optional Top cover available please call factory for ordering details.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL5016U3 Series
Active PFC
300 Watt Single Output
AC/DC Switching Power Supply
MECHANICAL DRAWINGS
PSRL5016E3 Series (Enclosed with built-in Fan Type): 8(L) x 4(W) x 2(H) inches; Weight: 1050g
PSRL5016U3 Series (U-Chassis Type): 7(L) x 4(W) x 2(H) inches; Weight: 950g; Option: Top Cover
I/O CONNECTOR PIN ASSIGNMENT
AC Input Connector (CON1):
PSRL5016U3 Series: Mating Molex Part No. 09-91-0500 equivalent (5 pin, 3 used), or M3, 3 pins terminal block 8.25mm center.
PSRL5016E3 Series: IEC320 or equivalent Snap-in mounting type or M3.5, 6 pins Terminal block 9.5mm center.
Output Connector (CON2):
Mating Molex 14 pins (09-91-2000), or Howder (HD-121-6P) M3.5, 6 pins terminal block, 9.5MM Center.
Output Pin Assignment:
Output Pin Connection
(See table at right).
Howder
Pins 1 – 3
Pins 4 – 6
Molex
Logic signal connectors (CON3):
Mating JST XHP-5 or equivalent (CHYAO SHIUNN JS-2001-05).
Mating Pins: JST SXH-002T-P0.6 for AWG 30 to 26.
Vo+
Vo-
Pins 1 – 7
Pins 8 – 14
Mounting Inserts:
4 Places 6-32. Max. Penetration 0.13” on bottom side and 4 places 0.25” on both sides.
Fan Drive:
Mating JST XHP-2 or equivalent (CHYAO SHIUNN JS-2001-02).
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明