PSRL0601DX-0548 [WALL]
300 Watt Dual Output AC/DC Switching Power Supply; 300瓦双输出AC / DC开关电源型号: | PSRL0601DX-0548 |
厂家: | WALL INDUSTRIES,INC. |
描述: | 300 Watt Dual Output AC/DC Switching Power Supply |
文件: | 总5页 (文件大小:366K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PSRL0601D Series
300 Watt Dual Output
AC/DC Switching Power Supply
FEATURES
● Smallest 300W with 1U Height Power Density: 8.3 Watts/cu in
● Low Leakage Current 500uA @ 240VAC / 300uA @ 120VAC
● 5/ 12/ 24/ 48V Dual Output Optional Combinations
● Power Factor Corrected to EN61000-3-2 Class A
● Approved to UL CUL TUV CB and CE
● AC Input Range Auto-Selectable
● 4 - Mechanical Options
● 2 Year Warranty
SPECIFICATIONS: PSRL0601D Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
90 - 132 / 180 - 264VAC Auto-ranging
47 to 63Hz
8 / 4A at 100 - 120 / 200 - 240VAC
Input Frequency
Input Current
Inrush Current
Leakage Current
Max 70A @ 230VAC and 35A @ 115VAC; cold start.
Regular type 1.5mA @240VAC. (Optional for 500µA max. at 240VAC / 300µA max. at 120VAC input).
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power Range
Output Adjustability
Total Regulation
320 Watts max with 22CFM airflow. (See Notes 2 and 3)
Output user adjustable ±5% minimum.
±1%
See Table
±1% (20MHz bandwidth)
Output Current
Ripple & Noise (peak to peak)
Transient Response
Hold-Up Time
Returns to within 1% in less than 2.5ms for a 50% load change and the peak transient does not excess 5%.
20ms min. at 80% of full load.
Turn-on & off < 5% over nominal voltage.
Overshoot
Turn On Delay
PROTECTION
1 second maximum at 120VAC.
Over Voltage Protection
Short Circuit Protection
Over Temperature Protection
Over Power Protection
Input Fusing Protection
GENERAL SPECIFICATIONS
Switching Frequency
Efficiency
Unit latching down when output exceeds 130% and recycle AC input to reset.
Trip without damage and auto-recovery.
Unit protected of excessive operating ambient 85°C; automatic recovery.
C.C. mode 110-140%; auto-recovery.
One T8A/250V fuse inserted in primary.
23KHz fixed frequency.
75% minimum (Measuring at 230VAC and full load).
1500 VAC input line to chassis (10mA DC cut off current). 3000VAC primary to secondary windings; 1500VAC
primary to core. All for 3 sec.
Withstand Voltage
Burn In
PFC
45 ±5°C for one hour @ 230VAC with full load.
Power factor correction pass EN61000-3-2 Class A.
Designated as PG on CN1 and TTL high 100-500ms after regulation. It goes low at least 1ms before loss of
Power Good
regulation and has ability to sink 100mA.
Power Supply On
Grounding Test
Green LED designated as LED1 on the PCB.
Apply 25A from ground pin of the three prong plug to the far most earth. Max. allowable resistance is 0.1 ohm.
Designated as FF on pin 3 of CN1 is an open collector output rated for 15VDC/5mA sink current maximum; it
will go high when a fan failure is detected.
Fan Fail (FF) Alarm
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0601D Series
300 Watt Dual Output
AC/DC Switching Power Supply
SPECIFICATIONS (CONTINUED)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.
-20°C to +85°C
Operating Humidity
5% to 90% RH, non-condensing
5% to 95% RH, non-condensing
Storage Humidity
Vibration
5 ~ 50Hz, acceleration 7.35 m/(s x s) on X, Y, and Z axis.
U Type (U-Chassis): 300W max with 18CFM forced airflow or 150W under convection cooling.
C Type (U-Chassis with top cover): 150W max convection cooling.
E Type (Enclosed with rear side built-in fan): 320W max.
Cooling
F Type (Enclosed with top built-in fan): 320W max.
Fan Drive
MTBF
12VDC/400mA is available to drive an external fan.
100,000 hours (according to MIL-HBK-217F) at 30°C.
PHYSICAL SPECIFICATIONS
U Type (U-Chassis): 600g
C Type (U-Chassis with top cover): 650g
Weight
E Type (Enclosed with rear side built-in fan): 750g
F Type (Enclosed with top built-in fan): 800g
U Type (U-Chassis): 6(L) x 4(W) x 1.5(H) inches.
C Type (U-Chassis with top cover): 6(L) x 4(W) x 1.55(H)
E Type (Enclosed with rear side built-in fan): 7(L) x 4(W) x 1.6(H)
F Type (Enclosed with top built-in fan): 6(L) x 4(W) x 2(H) inches.
Dimensions
Warranty
SAFETY
Emissions
2 years
FCC Part 15, CISPR 22 Class B, Conducted.
Approved to UL60950-1, CSAC22.2 No. 60950-1-03, TUV EN60950-1, CE Mark (LVD) EN61000-3-2,3
& IE61000-4 Series Regulations and CB.
Safety Regulations
OUTPUT VOLTAGE / CURRENT RATING CHART
Max. Output Current
Model
Output Voltage
Regulation
Ripple & Noise
Types U & C
Types E, F, and U
(forced air)
30A
(Convection)
15A
V1:+5 VDC
V2:+12 VDC
V1:+5 VDC
V2:+24 VDC
V1:+5 VDC
V2:+48 VDC
V1:+12 VDC
V2:+24 VDC
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
1%
1%
1%
1%
1%
1%
1%
1%
PSRL0601Dx-0512
PSRL0601Dx-0524
PSRL0601Dx-0548
PSRL0601Dx-1224
10.42A
15A
16.67A
30A
5.2A
8.33A
15A
30A
2.6A
4.16A
12.5A
6.25A
16.67A
8.33A
NOTES
1. PSRL0601D series is designated as PSRL0601Dx-y where x can be U (U-Chassis), C (U-Chassis with top cover),
E (Enclosed Type with side built-in Fan) or F (Enclosed Type with top built-in Fan); y can be 0512, 0524, 0548, 1224.
2. PSRL0601DU (with min. 18CFM forced air flow) & PSRL0601DE & PSRL0601DF Series: Max. 300W total combined
power of V1 and V2 for PSRL0601Dx-1224 and 250W for other models.
3. PSRL0601DU and PSRL0601DC Series with convection cooling: Max. 150W total combined power of V1 and V2 for
PSRL0601Dx-1224 and 125W for other models.
4. Ripple and noise is measured from 10KHZ to 20MHz bandwidth at output with parallel 0.1µF ceramic and 22µF electrolytic
capacitors.
5. 10% minimum load is required to maintain the ripple and regulation.
6. Output is fully isolated.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0601D Series
300 Watt Dual Output
AC/DC Switching Power Supply
MECHANICAL DRAWINGS
PSRL0601DU Series (U-Chassis Type only): 6(L) x 4(W) x 1.5(H) inches; Weight: 600g
PSRL0601DC Series (U-Chassis with Top Cover): 6(L) x 4(W) x 1.55(H) inches; Weight: 650g
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0601D Series
300 Watt Dual Output
AC/DC Switching Power Supply
PSRL0601DE Series (Enclosed with Rear Side built-in Fan Type): 7(L) x 4(W) x 1.6(H) inches; Weight: 750g
PSRL0601DF Series (Enclosed with Top built-in Fan Type): 6(L) x 4(W) x 2(H)inches; Weight: 800g
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0601D Series
300 Watt Dual Output
AC/DC Switching Power Supply
I/O CONNECTOR PIN ASSIGNMENT
Input and Output Connector (CN2):
HowderTerminal block Part No. HB-95-7P or Mating Molex Part No. 09-91-1600 (16 pin).
Output Pin Assignment:
(See table below).
Logic signal connector (CN1): Mating JST XHP-3 or equivalent (CHYAO SHIUNN JS-2001-03);
Mating Pins: ST SXH-002T-P0.6 FOR AWG 30 to 26.
Mounting Inserts: 8 Places M4X0.7 (8-32 Optional). Maximum Penetration 4mm sees outline drawing for
location.
Fan driver connector (FAN2): Mating connector is a Molex P/N 22-01-1022 (2 pins 0.98 pitch) or equivalent with
Series 2759 or 5159 terminals.
OUTPUT PIN ASSIGNMENT
Howder
Pins 1: V1
Molex
Pins 1 ~ 3: V1
Pins 4 ~ 8: RTN
Pins 9 ~ 10: V2
Pin 12: GND
Pin 14: Neutral
Pin 16: Line
Pins 2 ~ 3: RTN
Pin 4: V2
Pin 5: GND
Pin 6: Neutral
Pin 7: Line
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
相关型号:
©2020 ICPDF网 联系我们和版权申明