PSRL0402DX-1224 [WALL]
400 Watt with Airflow Medical Approved Dual Output AC/DC Switching Power Supply with Active PFC; 400瓦与气流医学核准双路输出AC / DC开关电源采用主动PFC型号: | PSRL0402DX-1224 |
厂家: | WALL INDUSTRIES,INC. |
描述: | 400 Watt with Airflow Medical Approved Dual Output AC/DC Switching Power Supply with Active PFC |
文件: | 总4页 (文件大小:294K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
PSRL0402D Series
400 Watt with Airflow
Medical Approved Dual Output
AC/DC Switching Power Supply with Active PFC
FEATURES
● 2 Year Warranty
● Power Factor Corrected to EN61000-3-2 Class D
● 3.3/ 5/ 12/ 24V Dual Output Optional Combinations
● U-Chassis Type Drive Max 250W Under Air Convection
● U-Chassis & Enclosed with Built-in Fan Mechanical Options
● 1U Height Size and High Power Density: 6.25 Watts/cu Inches
● Both Medical & ITE Safety Approvals for the PSRL0402DM Series
E Type (Enclosed with built-in Fan): 9(L) x 5(W) x 1.6(H) inches.
U Type (U-Chassis Type): 8(L) x 5(W) x 1.6(H) inches.
SPECIFICATIONS: PSRL0402D Series
All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
INPUT SPECIFICATIONS
Input Voltage
90 – 264VAC Full Range
Input Frequency
Input Current
47 to 63Hz
6.35A at 90VAC full load
Inrush Current
35A max @ 230VAC with full load and cold start.
Medical degree 300µA; ITE degree 1.5mA.
Designated as RSW on the CN3, requires a low signal to inhibit output.
Leakage Current
Remote ON/OFF
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Output Power Range
Output Adjustability
Total Regulation
400 Watts max with airflow. (See Note 4)
Output user adjustable ±5% minimum.
±5%
See Table
Output Current
Ripple & Noise (peak to peak)
Transient Response
Hold-Up Time
±1%
Returns to within 1% in less than 2.5ms for a 50% load change and the peak transient does not excess 5%.
20ms min. at 80% of full load.
Overshoot
Turn-on/off not exceed 5% over nominal voltage.
1 second maximum at 120VAC.
Designated as RS+ and RS- on the CN3.
Turn On Delay
Remote Sense
PROTECTION
Over Voltage Protection
Short Circuit Protection
Over-Temperature Protection
Over-Power Protection
Input Voltage Protection
Input Circuit Protection (Primary)
GENERAL SPECIFICATIONS
Switching Frequency
Efficiency
Latching down will occur when output voltage exceeds 130% and recycle AC input to reset.
Trip without damage and auto-recovery.
Protected in the event of excessive operating ambient 85°C and automatic recovery.
C.C. mode 110-140% and auto-recovery.
Power shut down under 80 ±5VAC, and recovered over 86VAC.
Two T8A/250V fuses inserted.
30KHz fixed frequency
75% minimum (measuring at 230Vand full load).
1500 VAC input line to chassis (2mA DC cut off current); 4000VAC between primary and secondary windings.
Primary to core 1500VAC. All for 3 seconds.
Withstand Voltage
Burn In
PFC
45 ±5°C for one hour @ 230VAC with full load.
Active power factor correction meets EN61000-3-2 class D.
Designated as PG on the CN3 will go high 100-500ms after regulation and goes low 1ms before loss of
Power Good
regulation.
Power Supply On
Grounding Test
Green LED designated as LED 1 on the PCB.
Apply 40A from ground pin to the earthed connection point. Max allowable resistance is 0.1 ohm.
Bi-color green LED in front panel (E Type only). Any protection occurred or RSW applied low signal will emit
orange.
LED Display
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0402D Series
400 Watt with Airflow
Medical Approved Dual Output
AC/DC Switching Power Supply with Active PFC
SPECIFICATIONS (CONTINUED)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
0°C to +70°C ambient, de-rating at 2.5% per degree from 50°C to 70°C.
-20°C to +85°C
Operating Humidity
5% to 90% RH, non-condensing
Storage Humidity
5% to 95% RH, non-condensing
Vibration
Frequency 5 ~ 50Hz, acceleration ±7.35 m/(s x s) on X, Y, and Z axis.
U Type (U-Chassis): 400W max with 23CFM airflow or 250W max under convection cooling.
Cooling
E Type (Enclosed with side built-in fan): 400W
Fan Drive
MTBF
PHYSICAL SPECIFICATIONS
12VDC/400mA is available to drive an external fan.
100,000 hours (according to MIL-HBK-217F) at 30°C.
U Type (U-Chassis): 1.3Kg
Weight
E Type (Enclosed with side built-in fan): 1.6Kg
U Type (U-Chassis): 8(L) x 5(W) x 1.6(H) inches.
E Type (Enclosed with side built-in fan): 9(L) x 5(W) x 1.6(H) inches.
Dimensions
Warranty
SAFETY
Emissions
2 years
FCC part15, CISPR 22 Class B, Conducted.
Approved to UL60950-1/ 60601-1, CSA C22.2 No. 60950-1-03/ 601.1-M90, TUV EN60950-1/ 60601-1,
CE Mark (LVD) EN61204-3/ 60601-1-2/ 61000-3-2,3, and IEC61000-4 Series Regulations and CB.
Safety Regulations
OUTPUT VOLTAGE / CURRENT RATING CHART
Output Voltage
Output Current
Model
Regulation Ripple & Noise
Range
Convection
30A
22.95CFM
40A
V1: +3.3 VDC
V2: +12 VDC
V1: +3.3 VDC
V2: +24 VDC
V1: +5 VDC
V2: +12 VDC
V1: +5 VDC
V2: +24 VDC
V1: +12 VDC
V2: +24 VDC
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 5%
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
± 1%
PSRL0402Dx-0312
PSRL0402Dx-0324
PSRL0402Dx-0512
PSRL0402Dx-0524
PSRL0402Dx-1224
16.7A
30A
25A
40A
8.34A
30A
12.5A
40A
16.7A
30A
8.34A
16.7A
8.3A
25A
40A
12.5A
25A
12.5A
NOTES
1. PSRL0402D Series is designated as PSRL0402Dx-y where x can be U-chassis (Type U), U-chassis with top cover
(Type C), or Enclosed with side built-in Fan (Type E), y can be 0312, 0324, 0512, 0524 and 1224 for output voltage.
2. 10% minimum load is required for all outputs to maintain the ripple and regulation.
3. Output is fully isolated.
4. Total combined power of V1 and V2: 400W max. with 22.95 CFM forced air and 250W convection cooling for
PSRL0402DU-1224; 400W for PSRL0402DE-1224 by self-cooling. 300W max. with 22.95 CFM forced air and 200W
convection cooling for other PSRL0402DU-y models; 300W for other PSRL0402DE-y models by self-cooling.
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0402D Series
400 Watt with Airflow
Medical Approved Dual Output
AC/DC Switching Power Supply with Active PFC
MECHANICAL DRAWINGS
PSRL0402DU Series (U-Chassis Type): 8(L) x 5(W) x 1.6(H) inches; Weight: 1.3kg; Option: Top Cover.
PSRL0402DE Series (Enclosed with built-in Fan Type): 9(L) x 5(W) x 1.6(H) inches; Weight: 1.6kg.
Output Pin Assignment
V1
V2
RTN
Howder
Molex
Pins 1 – 2
Pins 1 – 6
Pin 6
Pins 3 – 5
Pins 14 – 16 Pins 7 – 13
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
PSRL0402D Series
400 Watt with Airflow
Medical Approved Dual Output
AC/DC Switching Power Supply with Active PFC
I/O CONNECTOR PIN ASSIGNMENT
Input Connector (CN1):
PSRL0402DU Series: mating Molex Part No. 09-91-0700 equivalent (7 pin, 5 used), or Howder Terminal block (HD-121-3P).
PSRL0402DE Series: IEC320 or equivalent Snap-in mounting type or DINKLE Terminal block (DT-35-A02W-03).
Output Connector (CN2):
Mating Molex 16 pins (09-91-1600), or Howder (HD-121-6P) M3.5, 8 pins terminal block, 9.5MM Center.
Output Pin Assignment:
(See table)
Logic signal connectors (CN3):
Mating JST XHP-9 or equivalent (CHYAO SHIUNN JS-2001-05) Mating Pins: JST SXH-002T-P0.6 for AWG 30 to 26.
Mounting Inserts:
6-32, M4 4 Places individually with maximum penetration 0.15 inches on bottom side and 0.25 inch on both sides
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
相关型号:
PSRL0402M
400 Watt with Airflow Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402M-I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402MX-03
400 Watt with Airflow Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402MX-03I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402MX-05
400 Watt with Airflow Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402MX-05I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402MX-12
400 Watt with Airflow Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402MX-12I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402MX-18
400 Watt with Airflow Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402MX-18I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402MX-24
400 Watt with Airflow Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
PSRL0402MX-24I
400 Watt with Airflow Forced Current Sharing Series Single Output Medical Approved AC/DC Medical Power Supply with Active PFC
WALL
©2020 ICPDF网 联系我们和版权申明