PSAE-1500-60 [WALL]
AC/DC Switching Power Supplies;
| 型号： | PSAE-1500-60 |
| 厂家： | 
WALL INDUSTRIES,INC. |
| 描述： | AC/DC Switching Power Supplies |
| 文件： | 总8页 (文件大小：927K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
PSAE1500 SERIES
Rev B
Wall Industries, Inc.
1500 Watts, AC/DC Switching Power Supplies
FEATURES
• RoHS Compliant
• Remote Sensing Multiple PSU via RS232, RS485 & I2C
• Programmable Output Voltage (0~105%)
• PFC > 0.95 at 230VAC
• Up to 1502 Watts Output Power
• High Efficiency up to 93%
• 3000VAC (4242VDC) I/O Isolation
• Constant Current Limiting
• Global Control via RS232
• Power OK Signal
• Programmable Output Current (0~105%)
• Remote ON/OFF, Remote Sense Functions
• Universal Input Voltage Range: 90~264VAC (127~370VDC)
• Single Outputs Ranging from 12VDC to 60VDC
• Selectable +5V/0.5A or +9V/0.3A Auxiliary Output
• Forced Current Sharing at Parallel Operation
• UL 60950-1 and EN60950-1 Safety Approvals
• Protection: OLP, OVP, OTP, Fan Failure
DESCRIPTION
Size:
The PSAE1500 series of AC/DC switching power supplies provides up to 1502 Watts of output power in a
11.02” x 5.00” x 2.50” enclosed case. This series consists of single output models ranging from 12VDC to
60VDC with a universal input voltage range of 90~264VAC (127~370VDC). Standard features include high
efficiency up to 93%, PFC > 0.95 at 230VAC, programmable output voltage and output current, remote
on/off, remote sense, and power OK signal. This series also has over temperature, over voltage, and over
load protection. All models are RoHS compliant and have UL 60950-1 and EN60950-1 safety approvals.
11.02 x 5.00 x 2.50 inches
(280.0 x 127.0 x 63.5 mm)
Weight:
5.73 lbs (2.6kg)
MODEL SELECTION TABLE
Model Number Input Voltage (2) Output Voltage Output Current Line Regulation Load Regulation Output Power Ripple & Noise (1) Efficiency
PSAE-1500-12
PSAE-1500-15
PSAE-1500-24
PSAE-1500-30
PSAE-1500-36
PSAE-1500-48
PSAE-1500-60
NOTES
12 VDC
15 VDC
24 VDC
30 VDC
36 VDC
48 VDC
60 VDC
125A
100A
62.5A
50A
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0%
1.0
1.0
1.0
1.0
1.0
1.0
1.0
1500W
1500W
1500W
1500W
1501W
1502W
1500W
120mVp-p
150mVp-p
240mVp-p
300mVp-p
360mVp-p
480mVp-p
600mVp-p
89%
90%
92%
92%
92%
92%
93%
90~264 VAC
(127~370 VDC)
41.7A
31.3A
25A
1. Ripple & noise is measured at 20MHz limited bandwidth and using a 12" twisted pair-wire terminated with a 0.1µF & 47µF capacitors in parallel.
2. For voltages near the low end of the input voltage range, see the derating curve for the power supply output rating.
3. When in parallel operation only one unit might operate if the total output load is less than 5% of the rated load condition.
4. The power supply is considered a component which will be installed into final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
DERATING CURVES
Load vs Ambient Temperature
Load vs Input Voltage
120
120
Ta=25°C
100
90
80
70
60
50
40
100
80
60
40
20
-25
0
10
20
30
40
50
60
70
80
90
264
100
110
120
Ambient Temperature (°C)
Input Voltage (VAC)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/14/2013
Page 1 of 8
PSAE1500 SERIES
Rev B
Wall Industries, Inc.
1500 Watts, AC/DC Switching Power Supplies
SPECIFICATIONS: PSAE1500 SERIES
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
TEST CONDITIONS
Min
Typ
Max
Unit
AC input voltage range
DC input voltage range
90
127
47
264
370
63
VAC
VDC
Hz
Input Voltage (See Note 2)
Input Frequency
AC Current
At 115VAC and full load
At 230VAC and full load
At 115VAC and cold start
At 230VAC and cold start
At 115VAC and full load
At 230VAC and full load
18
9
A
A
30
45
Inrush Current
Power Factor
0.99
0.95
OUTPUT SPECIFICATIONS
Output Voltage
See Table
Voltage Tolerance
Voltage Adjustability
Line Regulation
Load Regulation
Output Power
Includes set-up tolerance, line regulation, and load regulation
Typical adjustment by potentiometer (VR1)
Low Line to High Line
-2.0
-5.0
-1.0
-1.0
+2.0
+5.0
+1.0
+1.0
%
%
%
%
0% to 100% full load
See Table
See Table
Output Current
Ripple & Noise (20MHz BW)
Hold-up Time
Measured with 0.1µF and 47µF capacitors in parallel
-1
+1
%
ms
At 230VAC and full load
full load
14
Setup Time
800
100
ms
Rise Time
full load
ms
Temperature Coefficient
PROTECTION
0~50°C
-0.02
+0.02
%/°C
Over Voltage Protection (see page 4) Protection type: latch-style. Recovery after reset AC power ON or inhibit
Variable OVP, 120% 7% Vout
105% rated output power
Over Load Protection
Over Temperature Protection
GENERAL SPECIFICATIONS
Efficiency
Protection type: constant current limiting
Protection type: auto-recovery after temp. goes down
85°C 5°C detect on heatsink of sec. side
See Table
Input to Output
Input to FG
Output to FG
4242VDC (3000VAC)
2121VDC (1500VAC)
707VDC (500VAC)
Isolation Voltage
Isolation Resistance
Leakage Current
Input to output, input to FG, output to FG; 500VDC
At 240VAC
100
MΩ
mA
2.5
FUNCTIONS
Auxiliary Power
Selectable +5V/0.5A or +9V/0.3A aux. output
By external switch
Remote ON/OFF Control
Power OK Signal
Sink Current: 20mA max.; Drain Voltage: 40V max.
Open drain signal low when PSU turns on
Output Voltage Trim
Output Current Trim
Parallel Operation (Current Sharing)
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity
0
0
105
105
%Vo
%Io
See page 6
See derating curve
Non-condensing
-20
-40
20
+60
+85
90
°C
°C
% RH
% RH
10
95
Cooling
Load and temperature control fan
Vibration
10~500Hz, 2G 10 min./1 cycle, period for 60 min. each along X, Y, Z axes. Compliance to IEC 68-2-6, IEC 68-2-64
PHYSICAL SPECIFICATIONS
Weight
5.73 lbs (2.6kg)
Dimensions (W x H x D)
SAFETY & EMC (See Note 4)
Safety Approvals
11.02 x 5.00 x 2.50 in (280.0 x 127.0 x 63.5 mm)
UL 60950-1; EN60950-1
EN55022; EN61204-3; EN61000-6-3
EMI (Conduction & Radiation)
Harmonic Current
EN61000-3-2; EN61000-3-3
EMS Immunity
EN55024; EN61204-3; EN61000-6-1; IEC61000-4-2,3,4,5,6,8,11
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/14/2013
Page 2 of 8
PSAE1500 SERIES
Rev B
Wall Industries, Inc.
1500 Watts, AC/DC Switching Power Supplies
MECHANICAL DRAWING
Unit: inches [mm]
11.02 [280.0]
9.84 [250.0]
0.59 [15.0]
2.50 [63.5]
4-M4 NUT
C N 2
12.32 [313.0]
1.34 [34.0]
9.33 [237.0]
4-M4 NUT
AC Input Terminal
Control Pin Number Assignment (CN2): JST S24B-PHDSS or Equivalent
Pin
1
Function
ACL
Pin
Function
Description
For RS232 Receiver Function
For RS232 Transmission Function
+5V/0.5A or +9V/0.3A Auxiliary Power
Ground
Pin Function
Description
1
2
NC
NC
13
14
15
16
17
18
19
20
21
22
23
24
EN+
AUX
EN-
Inhibit ON/OFF (+)
+5V/0.5A or +9V/0.3A Auxiliary Power
Inhibit ON/OFF (-)
2
ACN
3
3
AUX
GND
SCL
4
GND
PAR
VSET
POK
GND
VS-
Ground
5
Serial Clock used in the I2C Interface
Serial Data used in the I2C Interface
+5V/0.5A or +9V/0.3A Auxiliary Power
Ground
Parallel Operation Current Sharing
AUX Output Set
6
SDA
AUX
GND
VCI
7
Power OK
8
Ground
9
V Program
Remote Sense (-)
10
11
12
GND
ACI
Ground
VO-
Negative Output Voltage
Resmote Sense (+)
Positive Output Voltage
I Program
VS+
VO+
GND
Ground
CN2 Connector Housing
Mating Housing
JST PHDR-24VS or equivalent
Contact
JST SPHD-002T-P0.5 or equivalent
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/14/2013
Page 3 of 8
PSAE1500 SERIES
Rev B
Wall Industries, Inc.
1500 Watts, AC/DC Switching Power Supplies
LED STATUS
LED
LED Signal
Status
Power OK (Local Mode)
Power OK (Remote Mode)
Power Standby
Solid (Green)
Solid (Orange)
Slow Blink (Green)
Fast Blink (Red)
Solid (Red)
Over Voltage Protection (OVP)
Over Load Protection (OLP)
Over Temperature Protection (OTP)
Fan Failure
Slow Blink (Red)
Intermittent Blink (Red)
Interlace Blink (Red)
Power Failure
* Local mode: Use ACI/VCI to control output current and voltage
* Remote Mode: Use RS232 or I2C command to control output current and voltage
CURVES
CMD vs Output Curve
VCI vs OVP Curve
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/14/2013
Page 4 of 8
PSAE1500 SERIES
Rev B
Wall Industries, Inc.
1500 Watts, AC/DC Switching Power Supplies
REMOTE ON/OFF
(1) Using Internal 5V Auxiliary Source
(2) ON/OFF Control by NPN Transistor
(3) Using External Voltage Source
AUX
AUX
AUX
SW
2KΩ
EN+
2KΩ
EN+
2KΩ
EN+
SW
AUX
AUX
AUX
AUX
EN-
EN-
Tr
EN-
Ctrl
GND
GND
GND
GND
OFF Power OFF
sw
L
Power OFF
Power ON
OFF Power OFF
sw
ON Power ON
Ctrl
ON Power ON
H
Default setting
POWER OK SIGNAL
* Place an additional capacitor to have a better performance of auxiliary power operation.
P.OK
Good
Failure
* The grounding of “AUX” power should be connected to “GND” port. If “V-“ is connected as
Grounding make sure to short the “GND” and “V-“ ports.
Open (Default Setting)
Short to GND
5V
9V
DC / DC
5V/0.5A
or
VSET
AUX
VSET
9V/0.3A
GND
AUX
LOAD
470µF
16V
*
Internal Circuit
AUX and P.OK Signal
REMOTE SENSE
1) Remote Sense
2) Local Sense (Default Setting)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/14/2013
Page 5 of 8
PSAE1500 SERIES
Rev B
Wall Industries, Inc.
1500 Watts, AC/DC Switching Power Supplies
CURRENT SHARING
3) Current Sharing with Remote Sense
+
+
+
+
24
VO+
23
24
23
24
23
24
VO+
23
VS+
VS-
VO+
VO-
VS+
VS-
VO+
VS+
VS-
VS+
VS-
VO-
VO-
VO-
GND
POK
GND
POK
GND
POK
GND
POK
VSET PAR
VSET PAR
VSET PAR
VSET PAR
GND
AUX
GND
GND
GND
SDA
GND
NC
EN-
EN+
ACI
GND
AUX
GND
GND
GND
SDA
GND
NC
EN-
EN+
ACI
GND
AUX
GND
GND
GND
SDA
GND
NC
EN-
EN+
ACI
GND
AUX
GND
GND
GND
SDA
GND
NC
EN-
EN+
ACI
VCI
VCI
VCI
VCI
AUX
SCL
AUX
NC
AUX
SCL
AUX
NC
AUX
SCL
AUX
NC
AUX
SCL
AUX
NC
4) Current Sharing with Local Sensing
+
+
+
+
24
VO+
23
24
23
24
23
24
23
VS+
VS-
VO+
VO-
VS+
VS-
VO+
VO-
VS+
VS-
VO+
VO-
VS+
VS-
VO-
GND
POK
GND
POK
GND
POK
GND
POK
VSET PAR
VSET PAR
VSET PAR
VSET PAR
GND
AUX
GND
GND
GND
SDA
GND
NC
EN-
EN+
ACI
GND
AUX
GND
GND
GND
SDA
GND
NC
EN-
EN+
ACI
GND
AUX
GND
GND
GND
SDA
GND
NC
EN-
EN+
ACI
GND
AUX
GND
GND
GND
SDA
GND
NC
EN-
EN+
ACI
VCI
VCI
VCI
VCI
AUX
SCL
AUX
NC
AUX
SCL
AUX
NC
AUX
SCL
AUX
NC
AUX
SCL
AUX
NC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/14/2013
Page 6 of 8
PSAE1500 SERIES
Rev B
Wall Industries, Inc.
1500 Watts, AC/DC Switching Power Supplies
INSTALLATION INSTRUCTIONS
1. Mounting Directions
1-1 Recommended Standard Mounting Methods
(a)
(b)
(c)
+
4-M4
L=4mm max.
4-M4
L=4mm max.
4-M4
L=4mm max.
2. Mounting Method
2-1 There are ventilating holes on the front and back side panels. Do not obstruct; allow at least 50mm for airflow
2-2 The maximum allowable penetration for the screw is 4mm. Incomplete threading should not be penetrated.
2-3 Recommended torque of mounting screw: M4 screw: 1.27N • m (13.0kgf • cm)
More than 50mm
More than 50mm
FAN
FAN
Airflow
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/14/2013
Page 7 of 8
PSAE1500 SERIES
Rev B
Wall Industries, Inc.
1500 Watts, AC/DC Switching Power Supplies
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will
provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one
example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its
customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing
support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects.
Contact Wall Industries for further information:
Phone:
Toll Free:
Fax:
ꢀ(603)778-2300
ꢀ(888)597-9255
ꢀ(603)778-9797
E-mail:
Web:
Address:
sales@wallindustries.com
www.wallindustries.com
37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797
website: www.wallindustries.com • e-mail: sales@wallindustries.com
10/14/2013
Page 8 of 8
相关型号：
©2020 ICPDF网 联系我们和版权申明