JRW48S5-2000R [WALL]
暂无描述;型号: | JRW48S5-2000R |
厂家: | WALL INDUSTRIES,INC. |
描述: | 暂无描述 转换器 电源电路 |
文件: | 总3页 (文件大小:146K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
JRW Ultra Wide Series
Single and Dual Outputs
10 Watt DC/DC Converter
4:1 Ultra Wide Input Voltage Range
FEATURES
● 10 Watts Output Power
● High Efficiency up to 86%
● Fixed Switching Frequency
● Six-Sided Continuous Shield
UL
TUV
CB
CE MARK
● 4:1 Wide Input Voltage Range
● Standard 2 x 1 x 0.4 inch Package
● International Safety Standard Approval
● Options: Add suffix “-I” for Extended Operating Temperature Range
SPECIFICATIONS: JRW Ultra Wide Series
All specifications apply @ 25°C ambient unless otherwise noted
INPUT SPECIFICATIONS
GENERAL SPECIFICATIONS
Input Voltage Range ............ 24V nominal input........................ 9 - 36VDC
Efficiency ........................................................................................see table
Switching Frequency .................................................................300KHz typ.
Isolation Voltage (Input to Output).........................................1600VDC min.
Isolation Resistance ...............................................................109 ohms min.
Isolation Capacitance ................................................................ 300pF max.
48V nominal input...................... 18 - 75VDC
Input Filter....................................................................................... Pi Type
Input Surge Voltage (100ms max) ....... 24V input ...........................50VDC
48V input .........................100VDC
Input Reflected Ripple Current (See Note 2) ...............................30mAp-p
(nominal Vin and full load)
ENVIRONMENTAL SPECIFICATIONS
Start Up Time (nominal Vin and constant resistive load).............20ms typ.
Operating Temperature (See derating curves)
Remote ON/OFF (Option) (See Note 3)
Standard............................................... -25°C ~ +85°C (with derating)
(Positive Logic)............... DC-DC ON.............Open or 3.5V < Vr < 12V
DC-DC OFF.............Short or 0V < Vr < 1.2V
“I” (See Note 5)...................................... -40°C ~ +85°C (with derating)
Storage Temperature ..........................................................-55°C ~ +105°C
Maximum Case Temperature............................................................. 100°C
Relative Humidity...................................................................5% to 95% RH
(Negative Logic) ............. DC-DC ON...............Short or 0V < Vr < 1.2V
DC-DC OFF...........Open or 3.5V < Vr < 12V
Remote Off Input Current (nominal Vin) ............................................20mA
Thermal Impedance (See Note 6)
OUTPUT SPECIFICATIONS
Natural Convection.............................................................12°C / Watt
Natural Convection with Heat-Sink.....................................10°C / Watt
Output Voltage..............................................................................see table
Voltage Accuracy (nominal Vin and full load) ...................................... ±1%
Output Current ..............................................................................see table
Output Power........................................................................ 10 watts max.
Line Regulation (LL to HL at FL)....................................................... ±0.2%
Thermal Shock .................................................................... MIL-STD-810D
Vibration ................................10~55Hz, 10G, 30 minutes along X, Y, and Z
MTBF (See Note 4) ..........................................................1.976 x 106 hours
PHYSICAL SPECIFICATIONS
Load Regulation (10% - 100 % FL).............. Single Output.............. ±0.5%
Dual Output ................... ±1%
Weight ..................................................................................... 27g (0.95 oz)
Dimensions....................... 2.0 x 1.0 x 0.40 inches (50.8 x 25.4 x 10.2 mm)
Case Material ..............................................................Nickel-coated copper
Base Material...................................................Non-conductive black plastic
Potting material..................................................................Epoxy (UL94-V0)
Shielding......................................................................................... six-sided
Cross Regulation (Dual) (Asymmetrical load 25% / 100% FL) ............ ±5%
Minimum Load (See Note 1) ..............................................10% of full load
Ripple/Noise (20 MHz BW)...................... Single Output..............50mVp-p
Dual Output ................75mVp-p
Temperature Coefficient ................................................. ±0.02% / °C max.
Transient Response Recovery Time (25% load step) .......................250us
SAFETY & EMC
Approvals and Standards .................. IEC60950-1, UL60950-1, EN60950-1
PROTECTION SPECIFICATIONS
Conducted Emissions.........EN55022 ..............................................Class A
Over Voltage Protection................. 3.3V output ..................................3.9V
(zener diode clamp)
5V output ....................................6.2V
12V output ....................................15V
15V output ....................................18V
Radiated Emissions............EN55022 ..............................................Class A
EN55022 (See Note 7).........................Class B
ESD ....................................EN61000-4-2.............................Perf. Criteria B
Radiated Immunity..............EN61000-4-3.............................Perf. Criteria A
Fast Transient.....................EN61000-4-4.............................Perf. Criteria B
Surge..................................EN61000-4-5.............................Perf. Criteria B
Conducted Immunity...........EN61000-4-6.............................Perf. Criteria A
Over Load Protection (% of full load at nominal input).............. 150% max.
Short Circuit Protection....................................Hiccup, automatic recovery
Due to advances in technology, specifications subject to change without notice
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
JRW Ultra Wide Series
Single and Dual Outputs
10 Watt DC/DC Converter
4:1 Ultra Wide Input Voltage Range
OUTPUT VOLTAGE / CURRENT RATING CHART
Model
Input
Output
Voltage
3.3 VDC
5 VDC
Output
Ripple & Noise
50mVp-p
50mVp-p
50mVp-p
50mVp-p
75mVp-p
75mVp-p
75mVp-p
50mVp-p
50mVp-p
50mVp-p
50mVp-p
75mVp-p
75mVp-p
75mVp-p
Capacitor (10)
Input Current (8) Efficiency (9)
Load max
Output Current
Number
Range
JRW24S33-2500
JRW24S5-2000
JRW24S12-830
JRW24S15-660
JRW24D5-1000
JRW24D12-420
JRW24D15-330
JRW48S33-2500
JRW48S5-2000
JRW48S12-830
JRW48S15-660
JRW48D5-1000
JRW48D12-420
JRW48D15-330
2500mA
2000mA
830mA
465mA
548mA
519mA
544mA
534mA
547mA
548mA
239mA
270mA
259mA
262mA
267mA
281mA
270mA
78%
80%
84%
81%
82%
80%
80%
76%
81%
84%
84%
82%
78%
81%
6800µF
4700µF
690µF
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
3.3 VDC
5 VDC
12 VDC
15 VDC
± 5 VDC
± 12 VDC
± 15 VDC
24 VDC
(9 – 36 VDC)
670mA
470µF
±1000mA
±416mA
±333mA
2500mA
2000mA
830mA
±680µF
±330µF
±110µF
6800µF
4700µF
690µF
48 VDC
(18 – 75 VDC)
670mA
470µF
±1000mA
±416mA
±333mA
±680µF
±330µF
±110µF
NOTES
1. The JRW Series requires a minimum 10% loading on the output to maintain specified regulation. Operation under no load condition will not damage
these devices, however, they may not meet all listed specifications.
2. Please add an external filter at converter input terminals when measuring input reflected ripple current (See Figure 1).
L: Simulated source impedance of 12uH C: Nippon chemi-con KMF Series 47uF/100V.
3. The ON/OFF control pin voltage is referenced to –Vin.
To order negative logic On/Off control add the suffix “R” (Ex: JRW24S5-2000R).
4. BELLCORE TR-NWT-000332. Case 1: 50% Stress, Temperature at 40ºC. (Ground fixed and controlled environment).
5. “I” Version is more efficient; therefore, it can be operated over a more extensive temperature range than the standard version. Please add the suffix “-I”
for industrial grade temperature range models.
6. Heat sink is optional, please consult factory for ordering details.
7. The JRW Series meets 55022 class B with external components connected before the input pin to the converter.
8. Maximum value at nominal input voltage and full load of standard type.
9. Typical value at nominal input voltage and no load.
10. Tested at minimum Vin and constant resistive load.
Figure 1
DERATING CURVE
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
JRW Ultra Wide Series
Single and Dual Outputs
10 Watt DC/DC Converter
4:1 Ultra Wide Input Voltage Range
MECHANICAL DRAWING
UNIT: inches (mm)
PIN CONNECTION
PIN
1
SINGLE
+INPUT
DUAL
+INPUT
2
-INPUT
-INPUT
3
+OUTPUT
NO PIN
+OUTPUT
COMMON
-OUTPUT
CTRL (Option)
4
5
-OUTPUT
CTRL (Option)
6
1. All dimensions in Inches (mm)
Tolerance: X.XX±0.02 (X.X±0.5)
2. Pin pitch tolerance ±0.014 (0.35)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833
603-778-2300 www.wallindustries.com Fax 603-778-9797
相关型号:
JS-12-K0
Power/Signal Relay, POWER/SIGNAL RELAY, SPDT, MOMENTARY, 0.018A (COIL), 12VDC (COIL), 220mW (COIL), 8A (CONTACT), 24VDC (CONTACT), THROUGH HOLE-STRAIGHT MOUNT, ROHS COMPLIANT
FUJITSU
©2020 ICPDF网 联系我们和版权申明