HPSERIES [WALL]

Fast Transient Response;
HPSERIES
型号: HPSERIES
厂家: WALL INDUSTRIES,INC.    WALL INDUSTRIES,INC.
描述:

Fast Transient Response

文件: 总5页 (文件大小:482K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
HP SERIES  
600 Watts  
Brick Style DC/DC Converter  
Single Output  
Rev D  
Size: 6in x 3in x 0.69in (152.4mm x 76mm x 17.4mm)  
FEATURES  
100% Burn-In  
Fast Transient Response  
Synchronizable  
Output Current up to 120A  
Fixed Switching Frequency  
Remote Sense Compensation  
Remote ON/OFF (Active High/Low)  
Output Trim ±10%  
1500VDC Isolation  
Operation to No Load  
600 Watt Output Power (500W below 13VDC input)  
Very Low Output Ripple  
Short Circuit and Over Temperature Protection  
94% Efficient at Half Load, 92% Efficient at Full Load (Typical)  
DESCRIPTION  
The HP series is a high-density brick style converter that incorporates the desired features required in today’s demanding low voltage bus  
applications. Its unique dual interleaved phase-shifted topology minimizes both input and output noise. When performance, reliability, and low cost  
are needed, the HP series delivers.  
MODEL SELECTION TABLE  
Model Number(1) Input Voltage Range Output Voltage Output Current(5) Ripple & Noise No Load Input Current Output Power  
Efficiency  
92%  
12VDC  
15VDC  
20VDC  
24VDC  
26VDC  
28VDC  
50A  
40A  
HP12S12-600  
HP12S15-600  
HP12S20-600  
HP12S24-600  
HP12S26-600  
HP12S28-600  
30A  
12/24VDC  
(10-36VDC)  
25A  
1% Vout Max.  
0.1A  
600W  
23A  
21.42A  
48VDC  
12.5A  
HP12S48-600  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
11/11/2016  
Page 1 of 5  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
HP SERIES  
600 Watts  
Brick Style DC/DC Converter  
Single Output  
Rev D  
SPECIFICATIONS  
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.  
We reserve the right to change specifications based on technological advances.  
SPECIFICATION  
TEST CONDITIONS  
Min  
Typ  
Max  
Unit  
INPUT SPECIFICATIONS  
Input Voltage Range  
10  
36  
10  
VDC  
UVLO Turn On at  
VDC  
VDC  
VDC  
A
UVLO Turn Off at  
9.5  
Input Surge Voltage (100ms)  
50  
Input Current (Low Line)  
Input Filter  
70  
1,000µF low ESR capacitor recommended  
Reflected Ripple Current  
Remote ON/OFF  
Nominal Vin and Full Load  
20  
mA  
Active High or Active Low  
OUTPUT SPECIFICATIONS  
Output Voltage  
See Table  
Voltage Accuracy  
Line Regulation  
Load Regulation  
Voltage Adjustability  
Output Power (See Note 5)  
Output Current  
±1  
%
%
%
%
W
LL to HL at FL  
NL to FL  
±0.2  
±0.2  
±10  
600  
See Table  
1
Ripple & Noise (20MHz bandwidth)  
% Vout  
% Total  
Devation  
Transient Response Recovery Time  
50% Load Step  
5
Temperature Coefficient  
PROTECTION  
±0.02  
%/ºC  
Short Circuit Protection  
Over Temperature Protection  
Current Limit  
Self Re-Setting  
Self Re-Setting  
Continuous  
110ºC  
130%  
ENVIRONMENTAL SPECIFICATIONS  
Operating Case Temperature(6)  
Storage Temperature  
Humidity  
-40  
-55  
100  
125  
ºC  
ºC  
Fully Potted Construction  
1, 293, 794.959 hours  
MTBF  
GENERAL SPECIFICATIONS  
At Half Load  
At Full Load  
94  
92  
Efficiency  
%
Switching Frequency  
Isolation Voltage  
300  
kHz  
Input to Output  
1500  
1
VDC  
Isolation Resistance  
Isolation Capacitance  
PHYSICAL SPECIFICATIONS  
Weight  
GΩ  
µF  
0.01  
19.4oz (550g)  
6in x 3in x 0.69in  
(152.4mm x 76mm x 17.4mm)  
Dimensions (L x W x H)  
Case Material  
Shielding  
Aluminum Alloy  
Six-Sided  
NOTES  
(1) Model number for Threaded Inserts shown.  
Unit comes with 3M x 0.5 threaded thru inserts. For 0.125 thru-hole add a “TH” to the model part number. (Ex. HP12S12-600TH)  
(2) Pin to pin tolerance ±0.01” [±0.25mm]. Pin diameter tolerance: ±0.005” [±0.13mm]  
(3) Active High Enable is standard; for Active Low Enable add “R” suffix to the model number. (Ex: HP12S24-600R)  
(4) Due to advances in technology, specifications subject to change without notice.  
(5) Output power is limited to 500 watts minimum at 13VDC input and below.  
(6) Mi suffix is for military temp range of -55 to 100ºC  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
11/11/2016  
Fax 603-778-9797  
Page 2 of 5  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
HP SERIES  
600 Watts  
Brick Style DC/DC Converter  
Single Output  
Rev D  
DERATING CURVES  
TRIM EQUATIONS  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
11/11/2016  
Page 3 of 5  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
HP SERIES  
600 Watts  
Brick Style DC/DC Converter  
Single Output  
Rev D  
MECHANICAL DRAWINGS  
THREADED INSERTS (STANDARD)  
THRU-HOLD INSERTS (“TH” SUFFIX)  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
11/11/2016  
Page 4 of 5  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  
HP SERIES  
600 Watts  
Brick Style DC/DC Converter  
Single Output  
Rev D  
COMPANY INFORMATION  
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development  
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008  
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.  
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely  
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide  
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your  
future projects.  
Contact Wall Industries for further information:  
Phone:  
(603)778-2300  
Toll Free: (888)597-9255  
Fax:  
(603)778-9797  
E-mail:  
Web:  
sales@wallindustries.com  
www.wallindustries.com  
Address: 37 Industrial Drive  
Exeter, NH 03833  
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •  
Fax 603-778-9797  
11/11/2016  
Page 5 of 5  
website: www.wallindustries.com • e-mail: sales@wallindustries.com  

相关型号:

HPSTP-19-0500-M-ML

Interconnection Device, LEAD FREE
SAMTEC

HPSTP-19-0500-S-ML

Interconnection Device, LEAD FREE
SAMTEC

HPSTP-19-0500-S-SL

Interconnection Device, LEAD FREE
SAMTEC

HPSTP-19-0500-SL-M

Interconnection Device, LEAD FREE
SAMTEC

HPSTP-19-0500-SL-ML

Interconnection Device, LEAD FREE
SAMTEC

HPSTP-19-0500-SL-S

Interconnection Device, LEAD FREE
SAMTEC

HPSTP-19-0500-SL-SL

Interconnection Device, LEAD FREE
SAMTEC

HPSTP-19-1000-M-M

Interconnection Device, ROHS COMPLIANT
SAMTEC

HPSTP-19-1000-ML-ML

Interconnection Device, ROHS COMPLIANT
SAMTEC

HPSTP-19-1000-ML-S

Interconnection Device, ROHS COMPLIANT
SAMTEC

HPSTP-19-1000-S-M

Interconnection Device, ROHS COMPLIANT
SAMTEC

HPSTP-19-1000-S-ML

Interconnection Device, ROHS COMPLIANT
SAMTEC