DCWIM20-24S48C [WALL]
Fully Regulated Output Voltage;型号: | DCWIM20-24S48C |
厂家: | WALL INDUSTRIES,INC. |
描述: | Fully Regulated Output Voltage |
文件: | 总6页 (文件大小:460K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DCWIM20 SERIES
20 Watts
DC/DC Chassis & DIN-Rail DC/DC Power Module
Single Outputs
Rev A
FEATURES
• Ultra-Wide 4:1 Input Voltage
Range
• I/O Isolation of 2500VDC
• Over Load, Over Voltage, and Short Circuit
Protection
• Fully Regulated Output Voltage
• Fully Encapsulated Plastic Case • Remote On/Off Control
for Chassis & DIN-Rail Mounting
Version
• High Efficiency to 91%
• RoHS & REACH Compliant
• UL/cUL/IEC/EN 60950-1 Safety Approval & CE
Marking
DESCRIPTION
The DCWIM20 series of DC/DC power modules offers 20 watts of output power in a
fully encapsulated 3.78” x 2.13” x 0.92” plastic case with chassis or DIN-Rail mounting.
This series consists of fully regulated single output models with an ultra-wide 4:1 input
voltage range and high efficiency to 91%. Each model has RoHS & REACH
compliance, remote On/Off control, and over load, over voltage, and short circuit
protection. This series also has UL/cUL/IEC/EN 60950-1 safety approvals and CE
markings. Please contact factory for order details.
Size: 3.78in x 2.13in x 0.92in (96mm x 54mm x 23.3mm)
MODEL SELECTION TABLE
Input Current
Input Voltage
Range
Output
Voltage
Output
Current
Maximum
Capacitive Load
Output
Power
Model Number(1)
Efficiency Ripple & Noise
No Load
Max. Load
DCWIM20-24S51C
DCWIM20-24S12C
DCWIM20-24S24C
DCWIM20-24S48C
DCWIM20-48S51C
DCWIM20-48S12C
DCWIM20-48S24C
DCWIM20-48S48C
5.1VDC
12VDC
24VDC
48VDC
5.1VDC
12VDC
24VDC
48VDC
4000mA
1670mA
835mA
420mA
4000mA
1670mA
835mA
420mA
944mA
918mA
918mA
944mA
472mA
459mA
459mA
472mA
6800µF
1160µF
300µF
75µF
6800µF
1160µF
300µF
75µF
90%
91%
91%
89%
90%
91%
91%
89%
100mVp-p
150mVp-p
150mVp-p
200mVp-p
100mVp-p
150mVp-p
150mVp-p
200mVp-p
24VDC
(9~36VDC)
70mA
20W
20W
48VDC
(18~75VDC)
35mA
SPECIFICATIONS
All specifications are based on 25°C, Resistive Load, Nominal Input Voltage, and Rated Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
INPUT SPECIFICATIONS
24V Input Models
48V Input Models
24V Input Models
48V Input Models
24V Input Models
48V Input Models
24V Input Models
48V Input Models
All Models
9
18
36
75
9
Input Voltage Range
VDC
VDC
VDC
VDC
Start-Up Threshold Voltage
Under Voltage Shutdown
Input Surge Voltage (100ms Max.)
18
7.5
16
-0.7
-0.7
50
100
Input Filter
Internal Pi Type
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
See Table
±2.0
±0.5
%Vnom
Vin=Min. to Max. @Full Load
Io=0% to 100%
%
%
Load Regulation
±0.5
Output Power
Output Current
See Table
See Table
Minimum Load
Maximum Capacitive Load
No Minimum Load Requirement
See Table
Ripple & Noise
20MHz bandwidth
25% Load Step Change
25% Load Step Change
Power Up
See Table
Transient Recovery Time(2)
Transient Response Deviation
250
±3
µSec
%
±5
30
30
Start-Up Time
Nominal Vin and Constant Resistive Load
ms
Remote On/Off
Temperature Coefficient
±0.02
%/ºC
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
3/7/2017
Page 1 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCWIM20 SERIES
20 Watts
DC/DC Chassis & DIN-Rail DC/DC Power Module
Single Outputs
Rev A
SPECIFICATIONS
All specifications are based on 25°C, Resistive Load, Nominal Input Voltage, and Rated Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
TEST CONDITIONS
Min
Typ
Max
Unit
REMOTE ON/OFF CONTROL
Converter On
3.5V~12V or Open Circuit
Converter Off
0V~1.2V or Short Circuit
Control Input Current (On)
Control Input Current (Off)
Control Common
Standby Input Current
PROTECTION
Vctrl=5.0V
Vctrl=0V
0.5
-0.5
mA
mA
Referenced to Negative Input
3
Supply Off & Nominal Vin
mA
Short Circuit Protection
Over Load Protection
Over Voltage Protection
Hiccup Mode 0.25Hz typ.
Hiccup
Zener Diode Clamp
Automatic Recovery
150
120
%
% of Vo
ENVIRONMENTAL SPECIFICATIONS
12V & 24V Output Models
5.1V Output Models
48V Output Models
-40
-40
-40
-50
3.9
3.3
3.1
2.5
+87
+86
+85
Natural Convection, Nominal Vin, Load
100% Inom.
Operating Ambient Temperature
Storage Temperature
ºC
ºC
+125
Natural Convection
100LFM Convection
200LFM Convection
400LFM Convection
Non-Condensing
Thermal Impedance
ºC/W
Humidity
95
%RH
ºC
Case Temperature
+95
Cooling(3)
Natural Convection
775,200
MTBF (Calculated)
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
I/O Isolation Voltage
Isolation Resistance
Isolation Capacitance
PHYSICAL SPECIFICATIONS
MIL-HDBK-217F @25ºC, Ground Benign
@Max Load
Hours
See Table
285
KHz
VDC
MΩ
pF
60 Seconds
500VDC
100KHz, 1V
2500
1000
2200
Chassis Mount
DIN Rail Mount
3.77oz (107g)
5.86oz (166g)
Weight
3.78in x 2.13in x 0.92in
(96mm x 54mm x 23.3mm)
Dimensions (L x W x H)
Case Material
Plastic Resin (Flammability to UL 94V-0)
SAFETY CHARACTERISTICS
UL/cUL 60950-1 Recognition (UL Certificate)
IEC/EN 60950-1 (CB Report)
Safety Approvals
EMI Conducted Class A with no external
components
EMI
EN55022, FCC Part 15
Class A
EMI Radiated Class A External Components
EN55024
ESD
EN61000-4-2 Air ±8kV, Contact ±4kV
A
A
A
A
A
A
Radiated Immunity
Fast Transient
Surge
Conducted Immunity
PFMF
EN61000-4-3 10V/m
EN61000-4-4 ±2kV
EN61000-4-5 ±2kV
EN61000-4-6 10Vrms
EN61000-4-8 30A/M
EMS
NOTES
1. Din Rail Mounting is available for this series. To indicate Din Rail bracket add –D to model number. Ex. DCWIM20-24S51C-D
2. Transient recovery time is measured to within 1% error band for a step change in output load of 75% to 100%.
3. Natural Convection is about 20LFM but is not equal to still air (0 LFM).
4. It is recommended to protect the converter by a slow blow fuse in the input supply line.
5. Other input and output voltages may be available, please contact factory.
*Due to advances in technology, specifications subject to change without notice.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
3/7/2017
Fax 603-778-9797
Page 2 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCWIM20 SERIES
20 Watts
DC/DC Chassis & DIN-Rail DC/DC Power Module
Single Outputs
Rev A
DERATING CURVES
12V & 24V Output Models
5.1V Output Models
48V Output Models
EXTERNAL FILTER
External Filter meets Radiated EMI EN55022 class A; FCC part 15 Level A
Model
L1
C1
C2
C3
DCWIM20-24Sxx
DCWIM20-48Sxx
120µ H/120µ H
120µ H/120µ H
4.7µ F/50V
3.3µ F/100V
None
220pF
220pF
220pF
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
3/7/2017
Page 3 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCWIM20 SERIES
20 Watts
DC/DC Chassis & DIN-Rail DC/DC Power Module
Single Outputs
Rev A
MECHANICAL DRAWINGS
Chassis Mounting
Connections
Pin
1
Function
Remote On/Off
2
3
4
-Vin
+Vin
NC
5
6
-Vout
NC
7
8
-Vout
NC
NC: No Connection
Notes:
All dimensions in mm (inches)
Tolerance: ±0.5 (±0.02)
DIN Rail Mounting Bracket (-D Suffix)
Mechanical Dimensions
DIN-Rail Mounting Kit
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
3/7/2017
Page 4 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCWIM20 SERIES
20 Watts
DC/DC Chassis & DIN-Rail DC/DC Power Module
Single Outputs
Rev A
TEST SETUP
Peak-to-Peak Output Noise Measurement Test
Scope measurement should be made by using a BNC socket, measurement bandwidth is 0-20MHz. Position the load between 50mm and 75mm from
the DC/DC Converter.
TECHNICAL NOTES
Remote On/Off
Positive logic remote on/off turns the module on during a logic high voltage on the remote on/off pin, and off during a logic low. To turn the power module
on and off, the user must supply a switch to control the voltage between the on/off terminal and the –Vin terminal. The switch can be an open collector or
equivalent. A logic low is 0V to 1.2V. A logic high is 3.5V to 12V. The maximum sink current at the on/off terminal (Pin 1) during a logic low is -100µ A.
Overload Protection
To provide hiccup mode protection in a fault (output overload) condition, the unit is equipped with internal current limiting circuitry and can endure
overload for an unlimited duration.
Overvoltage Protection
The output overvoltage clamp consists of control circuitry, which is independent of the primary regulation loop that monitors the voltage on the output
terminals. The control look of the clamp has a higher voltage set point than the primary loop. This provides a redundant voltage control that reduces the
risk of output overvoltage. OVP can be found in data sheet.
Input Source Impedance
The power module should be connected to a low ac-impedance input source. Highly inductive source impedances can affect the stability of the power
module. In applications where power is supplied over long lines and output loading is high, it may be necessary to use a capacitor at the input to ensure
startup. Capacitor mounted close to the power module helps ensure stability of the unit, it is recommended to use a good quality low Equivalent Series
Resistor (ESR <1.0Ω at 100KHz) capacitor of a 10µF for the 24V and 48V devices.
Output Ripple Reduction
A good quality low ESR capacitor placed as close as practicable across the load will give the best ripple and noise performance. To reduce output ripple
it is recommended to use 4.7µF capacitors at the output.
Maximum Capacitive Load
The DCWIM20 series has limitation of maximum connected capacitance at the output. The power module may be operated in current limiting mode
during start-up, affecting the ramp-up and the startup time. The maximum capacitance can be found in datasheet.
Thermal Considerations
Many conditions affect the thermal performance of the power module, such as orientation, airflow over the module, and board spacing. To avoid
exceeding the maximum temperature rating of the components inside the power module, the case temperature must be kept below 95ºC. The derating
curves are determined from measurements obtained in a test setup.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
3/7/2017
Fax 603-778-9797
Page 5 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCWIM20 SERIES
20 Watts
DC/DC Chassis & DIN-Rail DC/DC Power Module
Single Outputs
Rev A
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
3/7/2017
Page 6 of 6
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号:
©2020 ICPDF网 联系我们和版权申明