DCW48S28-150 [WALL]
200 Watts Maximum Output Power;型号: | DCW48S28-150 |
厂家: | WALL INDUSTRIES,INC. |
描述: | 200 Watts Maximum Output Power |
文件: | 总8页 (文件大小:839K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DCW150 & DCWD150 SERIES
DC/DC Converter
Rev B
200 Watts, Single Output
4:1 Input Voltage Range
DCW150
DCWD150
Size: 2.56in x 3.86in x 0.67in (65mm x 98mm x 17mm)
FEATURES
Size: 2.07in x 3.86in x 0.67in (52.5mm x 98mm x 17mm)
OPTIONS
• Negative Logic Remote ON/OFF
• Heatsink
• 200 Watts Maximum Output Power
• 4:1 Wide Input Voltage Range
• High Efficiency up to 89%
• Six-Sided Continuous Shield
• Built-In EN55011 & EN55022 Class A Filter
• Over Voltage, Over Load, Short Circuit, Over Temperature
and Input Reverse Protection
• CV+CC Mode
• UL60950-1, EN60950-1, & IEC60950-1 Safety Approvals
• CE Marked
• Compliant to RoHS II & REACH
• Compliance to EN50155 and EN45545-2 Railway
Standard
• No Minimum Load Required
• 2250VDC Input to Output Isolation
• Adjustable Output Voltage
• Under-Voltage Lockout
• Top Side and Bottom Side Heat Dissipation
APPLICATIONS
DESCRIPTION
• Railway System
• Wireless Network
• Telecom/Datacom
• Industry Control System
• Distributed Power Architectures
• Semiconductor Equipment
• Battery Charger
The DCW150 and DCWD150 series of DC/DC converters provides up to 200 watts of output power. This
series consists of single output models with a wide 4:1 input voltage range. Each model in this series
features an adjustable output voltage, constant current mode output limit, and 2250VDC input to output
isolation. The models are also protected against over voltage, over load, short circuit, over temperature,
and input reverse conditions and are compliant to both RoHS II and REACH. The DCW150 and DCWD150
series are CE marked and have UL60950-1, EN60950-1 and IEC60950-1 safety approvals. Please contact
factory for order details.
MODEL SELECTION TABLE
Input Voltage Range Output Voltage Output Current(1) Ripple & Noise
No Load Input
Model Number
Maximum Capacitive Load Efficiency
Current
DCW24S12-150
DCWD24S12-150
DCW24S15-150
DCWD24S15-150
DCW24S24-150
DCWD24S24-150
DCW24S28-150
DCWD24S28-150
DCW24S48-150
DCWD24S48-150
DCW48S12-150
DCWD48S12-150
DCW48S15-150
DCWD48S15-150
DCW48S24-150
DCWD48S24-150
DCW48S28-150
DCWD48S28-150
DCW48S48-150
DCWD48S48-150
DCW110S12-150
DCWD110S12-150
DCW110S15-150
DCWD110S15-150
DCW110S24-150
DCWD110S24-150
DCW110S28-150
DCWD110S28-150
DCW110S48-150
DCWD110S48-150
12VDC
15VDC
24VDC
28VDC
48VDC
12VDC
15VDC
24VDC
28VDC
48VDC
12VDC
15VDC
24VDC
28VDC
48VDC
12.5A
10A
100mVp-p
100mVp-p
200mVp-p
200mVp-p
350mVp-p
100mVp-p
100mVp-p
200mVp-p
200mVp-p
350mVp-p
100mVp-p
100mVp-p
200mVp-p
200mVp-p
350mVp-p
70mA
80mA
95mA
120mA
130mA
50mA
60mA
60mA
70mA
70mA
25mA
25mA
25mA
25mA
35mA
40000µF
26000µF
10000µF
7600µF
86%
86%
87%
87%
86%
88%
89%
89%
89%
88%
88%
89%
89%
89%
88%
24VDC
(9~36VDC)
6.3A
5.4A
3.2A
12.5A
10A
2600µF
40000µF
26000µF
10000µF
7600µF
48VDC
(18~75VDC)
6.3A
5.4A
3.2A
12.5A
10A
26000µF
40000µF
26000µF
10000µF
7600µF
110VDC
(43~160VDC)
6.3A
5.4A
3.2A
2600µF
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/12/2018
Page 1 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCW150 & DCWD150 SERIES
DC/DC Converter
Rev B
200 Watts, Single Output
4:1 Input Voltage Range
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
INPUT SPECIFICATIONS
TEST CONDITIONS
Min
Typ
Max
Unit
VDC
VDC
VDC
VDC
24Vin (Nominal)
48Vin (Nominal)
110Vin (Nominal)
24Vin (Nominal)
48Vin (Nominal)
110Vin (Nominal)
24Vin (Nominal)
48Vin (Nominal)
110Vin (Nominal)
9
18
43
24
48
110
36
75
160
9
18
43
8.5
16.8
36.0
50
100
185
Input Voltage Range
Start-Up Voltage
7.9
15.6
33.0
Shutdown Voltage
Input Surge Voltage
24Vin (Nominal)
48Vin (Nominal)
110Vin (Nominal)
1 second, max.
Input Filter
Pi Type
OUTPUT SPECIFICATIONS
Output Voltage
Voltage Accuracy
Line Regulation
Load Regulation
Voltage Adjustability
Output Power
See Table
+1.0
-1.0
-0.2
-0.4
%
%
%
%
W
Low Line to High Line at Full Load
No Load to Full Load
Use a resistor across on the Trim1 and Trim2 to adjust the output voltage
+0.2
+0.4
+20
200
Output Current
Maximum Capacitive Load
See Table
See Table
100
12V, 15V
Ripple & Noise (20MHz bandwidth) 24V, 28V
200
350
200
35
mVp-p
48V
Transient Response Recovery Time 25% Load Step Change
µS
ms
Power Up
Remote ON/OFF
Start-Up Time
Constant Resistive Load
35
Temperature Coefficient
REMOTE ON/OFF CONTROL(2)
Positive Logic
(Standard)
Negative Logic
-0.02
-0.5
+0.02
%/ºC
DC-DC ON
DC-DC OFF
DC-DC ON
DC-DC OFF
Open or 3~12VDC
Short or 0~1.2VDC
Short or 0~1.2VDC
Open or 3~12VDC
1
(Option)
Input Current of CTRL Pin
Remote OFF Input Current
PROTECTION
mA
mA
3.5
Short Circuit Protection
Over Load Protection
Over Voltage Protection
Over Temperature Protection
ENVIRONMENTAL SPECIFICATIONS
Operating Case Temperature
Maximum Case Temperature
Storage Temperature Range
Relative Humidity
Continuous, Automatic Recovery
% of Iout rated, CC Mode(3)
% of Vout (nominal); Hiccup
105
125
120
140
%
%
+110
+100
ºC
-40
+100
ºC
ºC
-55
5
+125
95
ºC
%RH
Thermal Shock
MIL-STD-810F
Shock
Vibration
EN61373, MIL-STF-810F
EN61373, MIL-STD-810F
Vertical direction by natural convection (20LFM)
Only mount on the iron base-plate
Mount on the iron base-plate and top side with 7G-0058A heat-sink
Thermal Impedance(4)
MTBF
2.55
2.0
495,400
ºC/W
MIL-HDBK-217, Full Load
Hours
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/12/2018
Page 2 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCW150 & DCWD150 SERIES
DC/DC Converter
Rev B
200 Watts, Single Output
4:1 Input Voltage Range
SPECIFICATIONS
All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
GENERAL SPECIFICATIONS
Efficiency
TEST CONDITIONS
Min
Typ
Max
Unit
See Table
48Vout
Others
48Vout
Others
248
270
248
270
203
2250
1600
1600
1
275
300
275
300
225
303
330
303
330
248
24VDC Input
Switching Frequency
Isolation Voltage
kHz
48VDC Input
110VDC Input
All
Input to Output
Input to Case
Output to Case
1 minute
500VDC
VDC
Isolation Resistance
GΩ
Isolation Capacitance
3500
pF
PHYSICAL SPECIFICATIONS
DCW150
DCWD150
7.94oz (225g)
7.76oz (220g)
Weight
2.56in x 3.86in x 0.67in
(65mm x 98mm x 17mm)
2.07in x 3.86in x 0.67in
(52.5mm x 98mm x 17mm)
DCW150
Dimensions (L x W x H)
Case Material
DCWD150
Aluminum
Base Material
Aluminum
Potting Material
Shielding
Silicone (UL94 V-0)
Six-Sided, Continuous
SAFETY & EMC CHARACTERISTICS
UL60950-1
EN60950-1
IEC6095-1
Safety Approvals
EMI(5)
EN5501, EN55022
DC-DC Module
Class A
ESD
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Air ±8kV and Contact ±6kV
10 V/m
±2kV
EN55024 ±1kV and EN50155 ±2kV
10 Vr.m.s
100A/m continuous; 1000A/m 1 second
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Radiated Immunity
Fast Transient(6)
Surge(6)
Conducted Immunity
Power Frequency Magnetic Field
NOTES
(1) Measured at Full Load.
(2) The remote ON/OFF control pin voltage is referenced to –Vin. The negative logic is optional.
(3) The CC mode is Constant Current Mode and is tested at nominal input voltage.
(4) 1. The iron base-plate dimension is 19” x 3.5” x 0.063” (The height is EIA standard 2U)
2. The heat-sink is optional and P/N is 7G-0058A-F
(5) The standard module meets EMI Class A without external components.
(6) An external input filter capacitor is required if the module has to meet EN61000-4-4 and EN61000-4-5. We suggest the following:
DCW(D)150-24Sxx: Nippon chemi-con KY series, 470µF/50V
DCW(D)150-48Sxx: Nippon chemi-con KY series, 220µF/100V
DCW(D)150-110Sxx: Nippon chemi-con KY series, 150µF/200V
CAUTION: This power module is not internally fused; an input line fuse must always be used. If the load has sourcing capability (ex. Battery or super
capacitor), an output line fuse must always be used.
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
1/12/2018
Fax 603-778-9797
Page 3 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCW150 & DCWD150 SERIES
DC/DC Converter
Rev B
200 Watts, Single Output
4:1 Input Voltage Range
DERATING CURVES
DCW(D)48S24-150 Derating Curve
DCW(D)48S24-150 Derating Curve with Heat-Sink
EFFICIENCY GRAPHS
DCW(D)48S24-150 Efficiency vs. Input Voltage
DCW(D)48S24-150 Efficiency vs. Output Load
CHARACTERISTIC CURVE
DCW(D)xxS12-150 Vout vs Iout
DCW(D)xxS15-150 Vout vs. Iout
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/12/2018
Page 4 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCW150 & DCWD150 SERIES
DC/DC Converter
Rev B
200 Watts, Single Output
4:1 Input Voltage Range
DCW(D)xxS24-150 Vout vs. Iout
DCW(D)xxS28-150 Vout vs. Iout
DCW(D)xxS48-150 Vout vs. Iout
MODE
DESCRIPTION
CONDITION
CV Region
In normal operation. The output current in data sheet
If the output load current are over rating, the output
current will keep in a constant value and output
voltage will fall
Resistance Load > Vout/Iout (CC Point)
CC Region
Resistance Load < Vout/Iout (CC Point)
If the output resistance becomes short, it will operate
in hiccup protection
DCW(D)xxS12-150, DCW(D)xxS15-150:
Vout< 4.3V (typ.) to Output Short
DCW(D)xxS24-150, DCW(D)xxS28-150:
Vout < 8.0V (typ.) to Output Short
DCW(D)xxS48-150:
Hiccup Protection
Vout <13V (typ.) to Output Short
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/12/2018
Page 5 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCW150 & DCWD150 SERIES
DC/DC Converter
Rev B
200 Watts, Single Output
4:1 Input Voltage Range
MECHANICAL DRAWINGS
DCW150 Mechanical Drawing
TERMINAL CONNECTION
WIRE GAUGE
RECOMMENDATIONS
14~16AWG
PIN
DEFINE
1
2
3
4
5
6
7
8
9
+Vin
+Vin
-Vin
-Vin
Ctrl
+Vout
-Vout
Trim 1
Trim 2
14~16AWG
14~16AWG
14~16AWG
14~24AWG
14~16AWG
14~16AWG
14~24AWG
14~24AWG
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using the method
shown below
DCWD150 Mechanical Drawing
Notes:
1. All dimensions in inch (mm)
2. Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
3. Pole pitch tolerance ±0.01 (0.25)
4. Screw locked torque: MAX 5.0kgf-cm (0.49N-m)
5. Terminal screw locked torque:
MAX 2.5kgf-cm(0.25N-m)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/12/2018
Page 6 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCW150 & DCWD150 SERIES
DC/DC Converter
Rev B
200 Watts, Single Output
4:1 Input Voltage Range
With EMI Filter Module
TERMINAL CONNECTION
WIRE GAUGE
RECOMMENDATIONS
14~16AWG
PIN
DEFINE
1
2
3
4
5
6
7
8
9
+Vin
+Vin
-Vin
-Vin
Ctrl
+Vout
-Vout
Trim 1
Trim 2
14~16AWG
14~16AWG
14~16AWG
14~24AWG
14~16AWG
14~16AWG
14~24AWG
14~24AWG
EXTERNAL OUTPUT TRIMMING
Output can be externally trimmed by using the method shown
below.
Notes:
1. All dimensions in inch (mm)
2. Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
3. Pole pitch tolerance ±0.01 (0.25)
4. Screw locked torque: MAX 5.0kgf-cm(0.49N-m)
5. Terminal screw locked torque:
MAX 2.5kgf-cm(0.25N-m)
HEATSINK OPTIONS
Heat-sink Part No: 7G-0058A-F, Suffix: -HC
Notes:
1. All dimensions in inch (mm)
2. Tolerance: x.xx±0.02 (x.x±0.5)
x.xxx±0.01 (x.xx±0.25)
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/12/2018
Page 7 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
DCW150 & DCWD150 SERIES
DC/DC Converter
Rev B
200 Watts, Single Output
4:1 Input Voltage Range
MODEL NUMBER SETUP
DCW(D)
48
S
24
- 150
N
F(1)
HC
Series Name
Input Voltage
Output Quantity Output Voltage
Ouptut Power Remote Control Option
Filter Option
Assembly Option
24: 9~36VDC
48: 18~75VDC
110: 43~160VDC
S: Single
12: 12VDC
15: 15VDC
None: Positive Logic None: NC
None: None
HC: H=0.670”
Horizontal,
EMI Filter
Module
N: Negative Logic
F:
7G-0058A-F
24: 24VDC
28: 28VDC
48: 48VDC
Notes:
1. EMI filter meets EN55022 Class B
This EMI filter is used for DCWD-24Sxx-150 and DCWD-48Sxx-150 only, not for other items. (Ex: DCWD-24S24-150-F)
COMPANY INFORMATION
Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development
engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008
certification is just one example of our commitment to producing a high quality, well-documented product for our customers.
Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely
with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide
ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your
future projects.
Contact Wall Industries for further information:
Phone:
(603)778-2300
Toll Free: (888)597-9255
Fax:
(603)778-9797
E-mail:
Web:
sales@wallindustries.com
www.wallindustries.com
Address: 37 Industrial Drive
Exeter, NH 03833
Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 •
Fax 603-778-9797
1/12/2018
Page 8 of 8
website: www.wallindustries.com • e-mail: sales@wallindustries.com
相关型号:
©2020 ICPDF网 联系我们和版权申明